Reviews
Fits: YAMAHA SR500, YAMAHA SR400
Classic and cool.
Installed on SR400Final edition.
It fit without any problems.
Anyway, I am very happy with Classical.
I installed the Side Back on the Left Side, but the Back interferes with the Chain.
I gave this place 4 stars because it was unexpected.
Even with that, I am very satisfied with the product.
View detail
Fits: YAMAHA SR500, YAMAHA SR400
First of all, I'm satisfied.
I regretted that I should have chosen this one over DAYTONA from the beginning, but the fact that it can be installed even with Y's Gear's Rear Carrier is highly appreciated!
I can't help but feel that prices are high due to the high cost of living, but … I hope you do your best with the prices, etc!
View detail
Fits: YAMAHA SR500, YAMAHA SR400
The most natural atmosphere among side bag supports for SR400
There are various side bag supports for SR400, but Shim's Craft's side bag support feels comfortable when I put it on.
The front side uses a Seat Fixing Bolt, so it will be wobbly if the Seat is removed. When installing the rear side, it is easier to remove the License Plate.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Design priority, not practical.
I love the Design and bought it with my new car purchase.
Small top case (25L) I had been using it for commuting and touring, but it broke after 5 months of purchase and 2200km of driving.
It is as slender as it looks. And since it is not made of steel, it is difficult to weld and repair…
If you're thinking of wearing the Case all the time, you might want to remove it from your options.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Not bad, but not as good as OEM.
I really wanted to add a Rear Carrier, so I bought this one from OEM replica.
I had high hopes for Shims' product.
It is used for touring immediately.
good point
●This is not Attachment, but a practical Carrier.
Plating finish is also beautiful.
Easy to install.
A bad point
The structure is delicate. I tied it tightly, but it collapsed.
The price difference is only about $1,000 from OEM.
I then bought the OEM one and the Pipe thickness is as different. This one was thinner.
After all, there is a considerable difference from the OEM Product.
But I think this product is Slim, Stylish and suitable for people who want to load it and use it as Attachment.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Loading Up
Commuting Spec. I bought it because I wanted to install a Top case.
I got lost with things of Y's Gear, but I chose this, expecting refreshing feeling.
It was easy to install with just about changing it as Grab Bar.
I think that there is a little hang to fix with Bolt while just finely adjusting straight with respect to the car body.
Since the back part is higher, it will be slanted if you do not process a minority of Base.
Although it looks thin, it is very satisfying because it makes it possible to build luggage with confidence by making it very sturdy.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Durable making
SR's Rear Carrier has this because it was only this. I put a box of Home center and went around Japan, but there was nothing wrong.
Installation was quite easy.
View detail
Fits: YAMAHA SR500, YAMAHA SR400
Sym'z CraftShims Craft Classical Fender
It looks pretty good looking compared to other products, so it will be unnecessary to hide when you attach a Side bag. I bought it to prevent Bag's involvement in Tire, but now I am removing Bag. Although it is inconvenient, I use Backpack. View detail
Fits: YAMAHA SR500, YAMAHA SR400
I like it ~
It was easy to install and I was satisfied with the appearance. It's cool even without Side Back. Because Seat fixed Bolt is used, it may be a little worrisome when desorbing Seat. View detail
Fits: YAMAHA SR500, YAMAHA SR400
Attachment may also be easy and texture may also be refined. The back from width to the view became smart. There is no refuge of vibration, and I feel that it carries out to a Number or a Tail light, and somewhat individually uneasy, since a Rear fender
Attachment may also be easy and texture may also be refined. The back from width to the view became smart. There is no refuge of vibration, and I feel that it carries out to a Number or a Tail light, and somewhat individually uneasy, since a Rear fender will be firmly fixed to a Frame by a Stainless pipe as a result. View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
At the time of a Touring, it purchased in order to carry out seat back fixation. Probably attachment will be easy. Can anyone do it? Although it looked unreliably in the thin Pipe, it did not break, even if it stacked and carried out the No.1 o
At the time of a Touring, it purchased in order to carry out seat back fixation.
Probably
attachment will be easy. Can anyone do it?
Although it looked unreliably in the thin Pipe, it did not break, even if it stacked and carried out the No.1 of Japan circumference of the load (it appeared in the sheet one third) of 10 kg or more as for which the maximum loading capacity of 3 kg exceeds.
View detail
Fits: YAMAHA SR500, YAMAHA SR400
"Since I wanted to attach simultaneous with the genuine rear carrier (type2) of SR, I purchased. A comfortable design may be used even when not having attached the side bag by a classical fender. I think that the reinforcement of a rear fender is improved
"Since I wanted to attach simultaneous with the genuine rear carrier (type2) of SR, I purchased. A comfortable design may be used even when not having attached the side bag by a classical fender. I think that the reinforcement of a rear fender is improved. Since it is interfered with the flasher of rear when the larger side bag was attached, I made and relocated the hole to the genuine bracket with the drill (refer to photograph). Since a transfer bracket is also sold from the same company, if you don't have a confidence to process, I recommend it. Although I feel it is expensive a little, considering the tool and pay of processing, I think that it is cheap. Sym'z Craft: rear blinker transfer bracket http://www.webike.net/sd/9737648/10001001. Although the back support of Kijima is used usually, it cannot be equipped with a genuine carrier (type2) simultaneously. For those who is thinking to attach simultaneously, please be careful only this point. (Although the spacer was forcibly attached together with a genuine carrier, back support has been distorted later) KIJIMA Saddle bag support: http://www.webike.net/sd/1678414/" View detail