Reviews
Stylish!
FOR JAPAN MODEL 2 type CYGNUS X installed!
End Slash cut is Parenthesis good!
Pipe became slightly thicker than the previously installed Exhaust System, so the low-speed Torque also dropped a little in proportion to it.
However, the growth in the high speed area has improved.
The volume is not too noisy, it's quiet and it's just good feeling. I think that it is a good place to appeal this existence to the surrounding cars.
Sound quality is Burial's distinctive high-pitched sound. Personally I like the bass, but it will be compared to the previous Exhaust System, Beams SS 300 to the last.
The previous Exhaust System was SS 300 of Beams, the volume was slightly louder than that.
Beam's Baffle's STD Type.
Baffle of Semi-racing type etc.. I think that it is the volume of the order.
Both shape and running became Sporty.
View detail
Fits: SUZUKI ADDRESSV125
There is no problem in particular.
There is no problem with use. It is something like a defense, but the texture is good. However, when I saw theft, when I noticed it was lost. (Tears) Although it is purchase again this time, Slider's color changes from White to Black, the mounting part replaces Plating from Black, I like it but before Spec. I'm glad.. I hope it is possible to select colors if possible, so I will make the texture 4 stars. View detail
Fits: YAMAHA JOG ZR, YAMAHA JOG, YAMAHA JOG-ZII, YAMAHA JOG [jog]., YAMAHA JOG-ZR [JOG]., YAMAHA JOG-ZII [JOG].
Easy to set Exhaust System
Mounting on pre-regulation JOG-Zr.
Grand slam has been popular for a long time but after all it sounds like this unique Large sound.
It might be better to set it with Normal pulley than outside Pulley.
From NORMAL vehicle state Roller 18 Gram & Main jet Run 1 Runank.
If you choose Sports Exhaust System Grand Slam, you will not mistake first. Just filling in will cause Oil leakage from Silencer's Rivet, Silencer rattling will occur, so Rivet replacement is required.
View detail
The Setting was set as 80 km of MAX(s), and the earliness which reaches the speed was made into the strongest by 50?. Unless even the following signal has the vigor like Axel full admission and taken out 100 km or more, the interruption cannot do the
The Setting was set as 80 km of MAX(s), and the earliness which reaches the speed was made into the strongest by 50?.
Unless even the following signal has the vigor like Axel full admission and
taken out 100 km or more, the interruption cannot do the Motorcycle or car on
Rank to this moped front.
It is a Chamber with the Potential of the grade.
It is a Chamber to recommend very much those who want to enjoy the run whose
Punch was effective.
View detail
Fits: YAMAHA JOG, YAMAHA APRIO, YAMAHA JOG-ZII, YAMAHA JOG -BJ, YAMAHA JOG [jog]., YAMAHA Apprio, YAMAHA JOG-ZII [JOG]., YAMAHA JOG [jog]-BJ, YAMAHA JOG-ZII [JOG]., YAMAHA JOG [jog]-BJ
Aprio TYPE2 is equipped. In wearing, as for the weight roller, the thing of burial attachment and the pulley exchanged 02' remote controller jog (4WX), the clutch spring exchanged chameleon factories, and the main jet exchanged simultaneously the norm
Aprio TYPE2 is equipped.
In wearing, as for the weight roller, the thing of burial attachment and the pulley exchanged 02' remote controller jog (4WX), the clutch spring exchanged chameleon factories, and the main jet exchanged simultaneously the normal No. 80 and the NGK iridium plugs No. 8.
Since a silencer will hit a number plate about attachment if it remains as it is, an attachment bolt is made to blow an about 10-mm washer, and is equipped with it.
The maximum high speed is a little less than 90 K at this specification.
From start acceleration to the maximum high speed, there is also no valley and it runs.
Just by arranging a sports muffler and a chamber finely according to an actual vehicle model, they demonstrate original power.
It is an appropriate thing if it runs by bolt-on.
It is a mistake which is regarded as changing only an attached weight roller and the best coming out, then the direction which can be run now so so thinks that it is conversely uncanny.
Although sound volume may be felt noisy at first, it surely gets used (smile).
View detail
Fits: SUZUKI ADDRESSV125
It was considerate. Or although he thought that I was not itchy, he did not notice a thing itchy in fact. . . Or look before you leap. . . Being considered so and a product without a mistake become Colet. The plentiful repl
It was considerate.
Or although he thought that I was not itchy, he did not notice a thing itchy in fact.
.
.
Or look before you leap.
.
.
Being considered so and a product without a mistake become Colet.
The plentiful replace muffler exists in the address V125.
It is a tragedy if its favorite replace muffler has damage.
.
.
me of you -- the address V125 of specification -- good news TSU!! TSU it is [ TSU ] the product here!! I will describe the specifications of the product here below.
(1): M8 and Lock Nut (Iron):
1p.(2): M8 and Washer (Iron):
outside-diameter phi17.5mm 2.3 mm in height: 1p. (3) :
M8x45 and cap bolt (iron and black paint):
1p.(4): Pedestal made from Aluminum (Pillar Type and Alumite Treatment) : Outside-Diameter Phi40Mm 15 Mm in Height: 1P. (5) : Slider made from Duracon (Pillar Type and White) : Outside-Diameter Phi36Mm 80 Mm in Height: The 1P. Above-mentioned Contents,
It becomes a chamber protector for address V125 made from burial.
Mounting instruction is very easy.
It is arbitrary, and it chooses and only replaces one of the M 8-v holes of two upper and lower sides of the address, V125 which conclude a right-hand side engine cover and muffler stay.
Although an instruction manual is absent for the product here, since it is parts with which a user is arbitrary and it equips, flexibility is also a very high product.
Wearing is possible also by the muffler made from p's supply so that it may be in a picture.
As a matter of fact, does it arrange at any cost according to originality and creativity, and does wearing become possible, since it is not also the product limited as an object for the addresses V125!! (if the aluminum spacer made from a kitaco is passed)
Does the degree of freedom of a mounting part spread suddenly? The cap bolt and nut of M8 size,
If MONO made from the titanium alloy made from the product made from a tachyon, the product made from POJIPORINI, and beta titanium is treated,
Does the further raison d'etre as I specification increase!! If we gain parts with the high degree of flexibility, a voltage will also increase!! It is TSU the parts with the high degree of flexibility are [ TSU ] very recommendation since the originality of user each is reflected even if it treats the same parts!!
View detail