Reviews
GILD Rear Caliper holder for Brembo P2 rear brake
About quality and texture Top quality aluminum bracket. With smooth finishing. The weight feels ok. Not too heavy or too light. It also comes with brembo fiting stainless steel screws. About the feeling of use Looks perfect in silver with my gun metal brembo rear brake. Products to buy together Bought it with brembo P2 with red logo. Item number 20.B852.78 Difficulty of installation Installation maybe shorter if the rear rim is easily removed. The fitting of the rim which takes a while. I replaced my rear hose so the total time about 2 hours. But just fitting the caliper and bleeding the hose maybe just an hour. Cost performance and comparison with other products Price is around slightly cheaper than the other brands but the finish is not short of the others I guess. About shipping and packaging Come in plastic wrap with bubbles wrapping for protection by seller. Shipping cost is not expensive as the item is not very big. Any concerns, cautions, or advice when purchasing The only concern is that the item maybe scratched as it's only cover by plastic but the seller did a good job by protecting it. And the item is made not easily scratch too. View detail
Fits: Others iPhone 14 Pro, Others iPhone 14 Pro Max
GILD camera lens protector for iPhone 14 Pro Max
About quality and texture Great aluminum quality always from the company. About the feeling of use Actually there's different color to choose from like silver or black. But only black was sent to me without option. About Design The design is great and protective. Not like those cheap lens protectors you can buy on the market Cost performance and comparison with other products Not a cheap product for a lens protector but the quality built and it's purpose is well justified. This is my second time buying this product as I didn't fitted well the first time. The adhesive didn't stick well after I removed it to stick again. So please read the instructions carefully on how to fit it. About shipping and packaging Well packaged in a small box. Least likely to get scratched during delivery. Shipping is cheap as item is very small. Any concerns, cautions, or advice when purchasin View detail
too cheap
[How is it used?
I replaced my phone with an iPhone 15 thanks to my phone being submerged in water while I was at work a long time ago. The reason for the submersion was that the edge of the screen was cracked vigorously and water seeped in from there. I put the new iPhone 15 in a case that was not too tough and seemed to protect it reasonably well, and put thick GlassFilm on the screen. As the camera technology of smartphones has been improving over the years, high-end Lens has been attached. Is the Lens bare to protect the screen? I thought so, so I bought this product.
Was the one you received as per Image?
It arrived in a more proper packaging than I expected. I wonder if there is any profit to be made from this price after machining, anodizing, and packaging. I was a little worried. It's a good deal for the buyer.
How was your experience with it?
Double-sided tape is applied, so all you have to do is peel off the backing paper and stick it on.
I knew that there were protective films for lenses in the world, but I didn't put them on because I thought they might affect my photos, like changing the focus distance. But with this product, I don't have to worry about that.
[Included Parts:were they on?
Nothing in particular, only Instruction Manual.
[Was there anything that disappointed you?
None in particular. This QUALITY is too cheap.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I think we have to protect ourselves with these products because smartphones are too expensive these days. It is too late after it breaks and the Damage to Wallet is too Large.
View detail
Fender Eliminator not only removes
I bought this to clean up the Fender of my 890 DUKE R. Since simply removing the Fender was not enough, I chose the well-designed Billet License Plate Holder.
Even though it is an Exclusive Design, it is a difficult structure to assemble. Above all, we had a hard time with the wiring process. The result is a satisfactory finish.
Normal muffler is going to melt Blinker soon, so I am attaching Guard separately. This is honestly kind of lame, so it needs to be considered.
View detail
Fits: KAWASAKI ZRX1200DAEG, KAWASAKI ZRX1200DAEG
Great texture!
The texture is great because it is not just a Kit with a bent board.
The mill marks on the body are cool.
People around me say that the price is cheap for this quality.
It is not suitable for Type people who want to adjust the angle of Number upward.
View detail
Satisfied with Parenthesis goodness.
The fit is great, but I had a hard time putting the cowl back on because it interfered with the LED License Plate Lamp. But once it is installed, it is perfect! View detail
GILD design Frame Guard
Nice design. Well polished outlook. Easy to fit. Please fit one side at the time as the engine alignment may drop if remove both sides. View detail
Fits: KAWASAKI ZRX1200DAEG, KAWASAKI ZRX1200DAEG
The best of the best with careful finishing!
While other Fender Eliminator Kits are usually made of bent aluminum plates, this product has a very elaborate design. The price is not that different from other products, so it is a good recommendation. The installation is a little bit difficult until the normal fender is removed, and the wiring of the License Plate Light needs to be processed. If you have experience with wiring, it is easy. View detail
Wow that's cool
Increased rigidity provides peace of mind at high speeds.
Above all, it looks good.
View detail
It's thicker and more solid than I expected.
The design is cool, it is very easy to hang the load, and it is solid.
I think it's because they appropriated the Bolt from the original Tandem Footpeg, but it's thick!
View detail
Good engraving.
I chose this one because it was the cheapest among similar Parts.
It was installed during break-in, so it is hard to feel the effect of the installation, but I am satisfied with it.
View detail
I like it a lot looks-wise.
Although the price is higher than other Fender Eliminator, the design is beautiful.
Personally, I like it a lot.
Good for bonsai w
View detail
very good
In general, the Fender Eliminator is a plain Steel, but what can I say?:I like the aluminum MachineMachine design.
However, I noticed on the way of installation, because the design is based on OEMBlinker, if you use Other Brand ProductBlinker, it will be hidden by License Plate, so Extension is required.
The wiring holes are also sealed with urethane foam because they are bare from the bottom.
View detail
Wow that's cool
It is a Duralumin cut-out, so it is very luxurious and beautiful.
Because of the bearing, the business card case moves very smoothly when it is slid.
The lid closes with a Snap and does not open by itself.
View detail
Aluminum with good Design
In general, the Fender Eliminator is a plain Steel, but what can I say?:I like the aluminum MachineMachine design.
However, I noticed on the way of installation, because the design is based on OEMBlinker, if you use Other Brand ProductBlinker, it will be hidden by License Plate, so Extension is required.
The wiring holes are also sealed with urethane foam because they are bare from the bottom.
View detail
Fits: KTM 125DUKE, KTM 250DUKE, KTM 390DUKE
I'm glad I chose this product.
I had a hard time installing the Number, but other than that it was easy.
If you are familiar with it, you can install it in 30 minutes.
Since there is no part to be processed, even a beginner can install it easily.
View detail
I like the Design, so I bought it.
I bought this because I have gCraft's on my z125 pro.
It is good because it has a sense of luxury and is simple.
However, the price is very high, so I would like to see the terminals of the License Plate Light as Standard Equipment without any modification...
I don't have a Blinker Bracket because I use a Tail lamp with a built-in Blinker.
View detail
Fits: KAWASAKI ZRX1200DAEG, KAWASAKI ZRX1200DAEG
Design is cool
Design is pretty cool. I used to have a different Fender Eliminator Kit, but the Design was so cool that I replaced it.
It was somewhat difficult to install.
View detail
This is a luxury business card case.
The surface of this business card case is cut-out by Duralumin, and the bearing effect makes it very smooth when you slide it. It has a latch mechanism that prevents the lid from opening when you snap it shut, making it a luxurious business card case with a large person feel. View detail
Fits: KTM 125DUKE, KTM 250DUKE, KTM 390DUKE
Just change it and you'll look so much more stylish!
It was easy to install with a few tools.
The Installation Manual is also available, so anyone can install it right away.
Remove Blinker once, so Quantity:Pair (for Left and Right) Be careful not to install it by mistake.
It's a little pricey, but the quality is so high that it's RECOMMENDATION!
View detail