Reviews
Fits: BMW S1000R, BMW S1000RR, BMW M1000RR
Tank Pad
I am very satisfied with the texture this time.
I had a good business transaction with Large.
View detail
Required Items for SS
I chose this well-known product because there are not many other SC77 exclusive products available. The shape was Exactly to the Coloring and Shape of the Tank.
The installation itself is easy, but you need to be reasonably careful to apply it without air bubbles. I don't care much about it, so it took me about 10 minutes to apply it. The surface is smooth, so air bubbles don't bother me too much.
I accidentally applied it right after coating and it came off. However, I was able to cleanly peel off the adhesive tape and reapply it with a 3M double-sided tape that I bought separately. Since the product originally came with 3M, I did not feel any discomfort and it was finished beautifully.
View detail
Fits: HONDA CB250F, HONDA CB300F
Diversion to 10R
It was cheap at Sale, so I diverted it to 10R.
If carefully tensioned from the edge, air bubbles are Large sturdy.
However, the adhesive is soft, so if the release paper is peeled off at an angle in order to gradually peel it off from the side, the adhesive will become kinked and dirty, so care is required.
When the release paper is torn in the middle, be careful not to peel it off with your fingernail as it will become crumpled and the transparency will be lost.
The hold feeling is very different without it, but it is better to wear leather because of the aggressiveness of the cloth against the pants.
View detail
Grip power is as good as the previous reputation.
Once attached, the product is large and odd to peel off, but the hold feeling of the legs is completely different without it. View detail
Fits: HONDA NC700X, HONDA NC750X
It seems to be effective ….
I bought this to keep my butt from gapping and coming forward from the Seat when I ride my NC750X.
I think it is effective because I feel less pain in my calves and knees when I ride without much awareness of it compared to before.
Since there is no Instruction Manual for pasting, I referred to the product introduction pictures on webike and traced the area where my thighs, knees, and shins come in contact with the pad with a pencil, straddling the motorcycle, and pasted the pad according to the line (If I pasted the pad as shown in the introduction pictures, the longer pad would not have enough area to contact the base of my thighs. (If you paste the pad as shown in the introduction photo, the longer pad has less area where it contacts the base of the thigh, so I used the Quantity:Pair (for Left and Right) pasted in reverse.)
I thought the price was too high for the contents, but I'm glad I bought it because it seems to be effective.
View detail
Fits: DUCATI PANIGALE, DUCATI SUPER LEGGERA
For STREET as Naming, moderate Grip
Previous MODEL to 959 Panigale (without Cowl part) I have driven about 16,000 km in 3 years after installing the I am not sure how effective it is because it was almost a break-in run before I put it on. The other THRUXTONR had a thin tank and no matter how much I tried to hold it with TextilePants, it was not good enough for breaking. I had already felt its effect, so I planned to install it on my Panigale even before it was delivered to me. I had already planned to install R&G GripSeat on Panigale before it was delivered to me, but the surface of R&G GripSeat was textured and there was a lot of damage to Pants, so I chose Stomp Grip for Panigale. The aggressiveness to the wear is also low. I have a 171cm short leg, so I cannot benefit from the Normal step because my thigh does not reach to the position where it is attached. So far, there is no wear and tear on the Yellow Bears or the material, and the durability is excellent.
Considering the hard braking etc. in circuit driving, I might want a little more bite. But it is enough for street driving as Naming.
I wish it were a little cheaper.
I am pondering what to put on the additional STREET TRIPLERS.
View detail
I cut and pasted it.
I bought it in Black
Since it is Universal Type, I cut it and put it on the area where my knee and thigh hit.
Knee Grip Pad has been a common Material:I used to put the Carbon Style ones on, but they were in a fixed position and didn't fit my knees…
Grip power is sufficient for the need.
It is easier than not putting anything on.
View detail
For Circuit
Fitted for Circuit. I have not used other similar products so I can't compare, but as expected, it makes it easier to drive. However, the adhesive is very strong, so you might want to be prepared to never take it off again. I would be happy if the price was a little lower, but since it works, I am satisfied for the time being. View detail
Instead of OEMTankProtection
[How is it used?
Installed in place of OEMTankProtection, the price went up, but it's practically free since I got it with WeBig's delivery celebration points.
Was the one you received as per Image?
No problem as it is dedicated to the car model.
Was the installation difficult?
Simply clean the paste surface and apply.
However [Color] In the case of Clear, fine air bubbles can be seen (like carbonated bubbles on Glass) unless air is pushed out while applying.
I don't mind, though, because I think it's a Level that you can't tell unless you stare at it.
How was your experience with it?
Volcano chose ICON because of the pain and the small amount of Damage to Pants.
The friction with the Pants is Large, so I wonder if the body will be Well and Hold.
[Included Parts:were they on?
Small Seal with Manufacturer logo
[Was there anything that disappointed you?
Nothing in particular.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Good vibes
It was more For Street than the one I used to use.
I don't think Pants will be torn apart.
It's not like a regular Stomp Grip.
At any rate, it feels non-slippery.
I'd be careful putting it up!
View detail
I struggled a bit to put it on.
I decided to use Tank Pad, which is the most commonly seen royalty on Twitter.
I had it on before, but it's getting so slippery I'm replacing it!
It is difficult to apply and there are air bubbles...
I have a Design on the Tank of the vehicle. [Color] I went with Clear, but if you're wondering which one to choose, I'd recommend Black. (Translated; ω ´)
There are two types of patterns VOLCANO Fat. ICON. is a Spec. like ×. Please refer!
View detail
Knee grip is easier.
I am satisfied with the black Refreshing because my motorcycle is white.
I think it is a little expensive in terms of cost, but I am still glad I bought it.
View detail
Get more powerful Hold power!
[How is it used?
It is used on the 2019 MODEL Z900.
Was the one you received as per Image?
The shape and grip feel are just like the Image. It is easy to ride without excessive snagging.
I think that many people use the Frame cover for the Z900 rather than the Tank for the Knee grip, so both the Tank side and the Quantity:You should be happy that you are in Set.
Was the installation difficult?
Once the degreasing is done in advance and the position of the paste is determined, all that is left is to carefully apply the paste from the edge.
[Color] Clear must be worked on very carefully or bubbles and dust will be noticeable, so be very careful.
This time I bought Black and put it on without worrying about anything.
However, it is very adhesive, so be careful not to do it improperly or you will get into trouble.
How was your experience with it?
I had a Stomp Grip on my previous Motorcycle, but it was the warty shaped one (VOLCANO) that you often see.
This time we tried ICON, but it still has sufficient Grip force.
I have a Knee grip about between the Tank and Frame cover, so the increased Grip force on both of them is very Plus.
You will be glad to have it installed in various scenes such as touring, city driving, and circuits.
View detail
Mounting is not Kang Tan.
The base paper is very difficult to peel off, and the adhesive on the Body side almost peels off if it is poorly untangled.
Also, the edges are peeled off at first, and then gradually turned up to a large size and pasted on, which also requires a lot of strength.
The feel is good, except for the sticking.
View detail
whole [Color] It's not Clear.
I used it on my 2021 zx6r.
I bought this because I believed the Review that said it was for the 2009−2015 model but it worked fine on the 2021 MODEL.
[Color] I ordered Clear, but the Frame part had Black.
If you think about it, all the frame parts are black except for the white color of my 2021 model, so I'm sure it's not a problem for others at all, but it's not a cheap item and I wish it had been clearly stated.
View detail
Without it.
Repeat Purchase
You can run without it, but once you use it, you'll need it.
It slips and the Form is not set.
A little hang is needed in terms of installation work.
Remove the base paper a little at a time. While scraping, make sure there are no air bubbles.
You need to put up A little each A little each.
If you apply it patiently, it will not contain any air bubbles and will be beautifully finished.
I think it's better if the temperature is around 20 degrees Celsius.
I think it is hard and difficult to stick when the temperature is low.
I`ve omitted the part about putting it on the Frame.
View detail
Grip strength is good!
Even if you think you have a firm knee grip, you can't help but shift forward while driving So I bought this product, which had good reviews
Attaching itself is not a problem, you just need to fit the shape and apply it so that no air gets in from the edges
It feels a lot more Hold when running and I look forward to future runs
And then there's durability (Peeling) I'm worried about the quality of the product, but I hope it will last a long time
View detail
Expensive but good product
'19 I put it on the ZX-6R
I think it's partly because of the riding posture, but before I put it up, the tank slipped a lot
I had to do a knee grip with more force than necessary, which resulted in a wobbly leg and knee pain after the ride It was awful
When I put this product on the tank, the feeling of hold increased and it doesn't slide down beautifully!
It made the ride a lot of fun
I always ride with Jeans and I've never felt any particular warts and bruises
The strongest negative points are as follows
Expensive for the parts
I don't like the design (warts and all)
View detail
Fits: SUZUKI GSX-R600, SUZUKI GSX-R750
Royal road
Used in GSX-R600 K9.
These Pads are various in each Manufacturer
Large body [Color] Although it was Clear, there were many places difficult to match with the car body
Manufacturer here also has a setting for Black
It was Don Pissha for my own car that had been hardened with almost black.
Usability is ? ? ? Well, I guess this is something like.
Since we also incorporated Rear Sets almost at the same time
Is it the benefit of Position change
I did not know whether it was the benefit of Pad.
However, "As it is" There is a sense of Hold in
It goes without saying that it became easier to run.
View detail
It was expensive, but I was glad I bought it
At first I went to Home center etc. and thought about trying various things, but made it for exclusive use.
Although it is Small in terms of area, if you stick it in line with the Thigh Line when you are on the ride
You get enough Grip. It's as expected.
Although there is a story that it is painful, but there is no problem personally.
It may be painful if it is an extremely thin Pants or when it gets on for a long time.
Because it is the color of Clear, but the material is looking at Blue as compared with Tank Pad of PROGRIP
Because of the thickness it is quite conspicuous.
It is not a feeling that there is a presence, but if you want to make it Custom, Black might be better.
Although it has nothing to do with the product, the sticker attached with extra was happy because I was good with Parenthesis unexpectedly.
View detail