Reviews
Fits: KAWASAKI KSR110, KAWASAKI KL110, KAWASAKI KSR110, KAWASAKI KL110
It was for Cover.
I bought it because I had a Crankcase splitting application, but it was for Cover, not for Crankcase matching. View detail
It's not expensive.
It is recommended to replace the existing Bolt.
This is a complete set of bolts around the crank.
OEMs have a problem with cost, and many of the bolts are also steel, so they are easy to rust and corrode.
When I tried to open it up to overhaul it, the bolt was corroded and I couldn't turn the wrench, or worse, the bolt was corroded and broke…
I have bitter memories from my experience, so I replace the bolts whenever possible.
good point
Simply replace the existing Bolt.
Stainless steel is resistant to corrosion and rust.
No more broken bolts.
Weight reduction.
I think there is almost nothing bad about it.
Bolt corrosion is really large and strange. If you do the maintenance yourself, you will understand.
View detail
Fits: KAWASAKI Estrella BJ250A, KAWASAKI estrea, KAWASAKI Estrella BJ250A, KAWASAKI estrea
Even the smallest details are important.
I bought this because the Bolt around the Crankcase was powdered and corroded and it was looking a bit tired, so I decided to give it a new look.:Titanium.
Installation is just a matter of replacing the existing Bolt since it is a Bolt. However, the existing Bolt was so corroded that it took a lot of effort to remove it (laughs).
good point
The appearance will change to Large, like a tuned Machine.
The durability and strength are unquestionable.
The Bolt's screw mount is very accurate, so installation is easy.
A bad point
None
The image of the car body can be changed even by one bolt.
View detail
Don't expect too much.
It will be Motorcycle's Extra Grounding.
It is said that the flow of the ignition system is made smooth to increase the power.
I bought it out of curiosity, but Extra Grounding is very much a Brush-boo.
good point
Idling and starting will be Smooth.
Torque up can be felt naturally.
Replacement is easy.
A bad point
Dramatic changes are scarce.
It may be better to think of it as a part that improves the condition of the individual rather than Power. Because it doesn't become bad by installing it.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Repeat with the results I've used in the past.
I used it on a TW I used to own and it was a Repeat.
I wanted to replace the bolt around the engine of NORMAL. This time it's Stainless Steel.
good point
Since it is made of Stainless Steel, it is strong against corrosion and has high durability, it becomes Refresh around the engine. I took off the old bolt and it seemed to be usable, but it was quite worn out.
Just replace the OEMBolt.
Because it is Silver with Stainless Steel, it doesn't look like it was done on purpose. There is no sense of having changed it in any way.
A bad point
It's expensive for a Bolt.
To tell you the truth, I would like to overhaul the whole body, but it is large strange to do it at once, and I think that maintenance from the place where I noticed little by little is the hang that I can be with for a long time.
It's good to have a clean Crank Case Cover and Engine area. Because air-cooled engine has a beautiful shape.
View detail
A perfect dress-up product.
I used it to dress-up the Crankcase area.
It's Titanium, so it's a little lighter.
It's not a performance component, but it does change the look of the car quite a bit.
good point
● Material:Titanium, so it's sturdier and lighter than the OEMBolt.
If it looks like a Tuned engine, it looks like a Tuned engine.
Simply replace the existing Bolt.
A bad point
This is not linked to driving performance.
It's expensive, really.
Unlike Custom, which pursues only the performance, this product aims at the dress-up effect.
I think it's great that a single Bolt can change the appearance of an engine.
View detail
Fits: KAWASAKI KSR110, KAWASAKI KL110, KAWASAKI KSR110, KAWASAKI KL110
Scam, don't buy it
i was worried about Blue point with Washer, but the description says it is included in the package, so I decided to buy it I bought it because it was a good choice I was stunned when it arrived, the package had a sticker that said "ksr110/klx110 LeftRight Crankcase Cover Quantity:21pcs." That's it The rest is paper advertising their products
I felt that I had been beaten If they do this, I feel that the strength and safety of the product is in doubt I think that it is better to use OEM parts I'm starting to feel like
View detail
It is different from explanation
* Bundled contents and brief explanation are stated in the product to be delivered.
Although there is description in the explanation, since there is nothing actually in it, please be careful for those who are not confident in maintenance.
View detail
Self-satisfaction??
Since I bought an old Motorcycle, I was concerned about rust of Bolt kind, I decided to buy by polishing Covers, but I bought it right answer.
Performance etc. It does not rise, but I am very satisfied myself. Although other people wrote, I can save the trouble of going to Homsen, I think that it is a good product like Cost.
View detail
1 pc 1 pc Instead of searching for yourself
When I wanted Accent and I was looking for Stainless bolt I got various things that my head became a Taper and color, but I bought this item with Cost performance.
Bolt itself had no problem at all.
But XJR 1300 did not have Bolt of Pulser Cover, 2 Quantity : 1pc. It is a subtle place whether it is dedicated or universal because it is supposed to be 23 of them.
View detail
Not to rust Unexpectedly None!
It is completely inconspicuous!
I bought this set for not rusting.
Since there is no Instruction Manual, I do not know how far Exchange is supposed with this Set.
I properly exchanged one pc at a time, but the length of Bolt does not match and Bolt has surplus.
View detail
Saved with Set.
Bolt of Engine Cover of Motorcycle which we owned so far changed to Large body Stainless cap bolt, but measuring the original OEMBolt's Length 1 pc at a time and going to purchase at Home Center from Memo is troublesome I was doing things.
So it is very helpful for outside PartsManufacturer selling in Set. The price is about the same price or a little cheap as I buy it in Ho smsen.
It's a Dress-up parts, but I'm glad that you can purchase with Set.
View detail
Items that take more time than I expected
I knew there was no Instruction Manual, but since there is no description of how many pieces of missing pieces are included, I do not even know whether it matches the number of these screws. (As far as the total is known)
There were quite a few books and I did not have Screw of Size removed from Case so I bought additional at Home center.
In Small letters, where there are descriptions for ReplacementScrew where they are very unkind.
It is impossible for amateurs ~.
View detail
although the attached touch is very good -- -- unknown Bolt Several were generated.If can be carried out, where does it attach? The Torque wanted the description of ?.
although the attached touch is very good --
-- unknown Bolt Several were generated.If
can be carried out, where does it attach? The Torque wanted the description of ?
.
View detail
The Stainless bolt was purchased when Clutch covers were exchanged. car-body left-hand side is also included in the Set, and I think that this price is quite handy . (it is ... whether a number is insufficient if the Sprocket cover is changed
The Stainless bolt was purchased when Clutch covers were exchanged.
car-body left-hand side is also included in the Set, and I think that this price is quite handy
.
(it is ... whether a number is insufficient if the Sprocket cover is changed)
View detail
Fits: KAWASAKI ZEPHYR1100 [Zephyr]., KAWASAKI ZEPHYR1100 [Zephyr].
[webike Monitor] With it being a product made from a STAINLESS STEEL, since it was comparatively cheap, it purchased, but the screw thread licked for a Torque to be applied too much in the case of attachment, and for it able to fold, and it also became im
[webike Monitor] With it being a product made from a STAINLESS STEEL, since it was comparatively cheap, it purchased, but the screw thread licked for a Torque to be applied too much in the case of attachment, and for it able to fold, and it also became impossible to remove. If there may be intensity more since it is not an Aluminum although he thinks that he is bad? View detail
Although it was written in the other impression, it was delivered in the state that it was wrapped in paper. It was simple, and there was no instruction manual, so it was lonely touch! It is the attached comment. Attachment is satisfactory at all. If the
Although it was written in the other impression, it was delivered in the state that it was wrapped in paper. It was simple, and there was no instruction manual, so it was lonely touch! It is the attached comment. Attachment is satisfactory at all. If the head of a bolt is larger, I think that there may be a presence. Probably, the color bolt of aluminum would be satisfactory if it is a stainless, although there is decoloring by corrosion or suntan. View detail
Goods are only Bolt simple substances. There is also no description and number List. -- having only seen, since the Bolt of various die length was contained -- -- if it could not be judged which is used where but one old Bolt
Goods are only Bolt simple substances.
There is also no
description and number List.
-- having only seen, since the Bolt of various die length
was contained --
-- if it could not be judged which is used where but one old
Bolt extracted, die length was seen and
work of bolting for the Bolt of the same new die length was repeated there.
If
data for
attachment explanation are contained, I will think whether attachment becomes easy in the
emergency.
I would like to improve.
View detail