Reviews
Fits: KTM 1290 SUPER DUKE R, KTM 390 DUKE, KTM 250 DUKE, KTM 200 DUKE, KTM 125 DUKE
Aluminum Footpeg
Touring and city driving
The product was exactly as shown in the Image.
Is it possible to install it to determine the position of the footpeg?
It was hard to decide.
NORMAL footpeg position is too low to be satisfactory after replacement.
Position.
Included Parts:, Instruction Manual is attached and easy to understand
The product was exactly what I expected.
View detail
A little bit to long
In my opinion a little bit too long to fit beautiful to stock exhaust, but maybe with akrapovic muffler will looks perfect I dunno. View detail
Fits: DUCATI PANIGALE V2, DUCATI STREETFIGHTER V2, DUCATI STREETFIGHTER V4S, DUCATI STREETFIGHTER V4, DUCATI PANIGALE V4 Speciale, DUCATI PANIGALE V4S, DUCATI PANIGALE V4, DUCATI PANIGALE V4 Speciale, DUCATI PANIGALE V4S, DUCATI PANIGALE V4
Wiring ingenuity required
The original wiring is surprisingly long and there is almost no space for it.
If possible, I would like to see ShortWiring or a storage boxetc. on the back of the number.
Also, it was difficult to understand where to use the original screws and the screws that came with the product.
It would be even better if the Number angle could be adjusted.
I dare to be harsh in anticipation of Moto Crazy's future.
View detail
almost
S1000RR 12MODEL.
The Body is well made. If you are not dissatisfied with the shape, it is a good product. It attaches quickly.
The assembly is a bit annoying because of the large number of parts, but I chose it because it offers more flexibility in combination than the oddly integrated parts.
But personally, I find it a bit tacky.
Below is a list of areas that I thought were subtle. I did not feel that the quality of the product was not good enough, as it was all a matter of taste in design.
License Plate Light is very bland.
The design of the Fender Eliminator is a bit inward, but it looks as if the OEM's bloated License Plate Light has been transplanted. I couldn't put it on myself.
Reflector is on top.
→KitSingle Item:This is not so noticeable when viewed as a single item, but when attached to the car body, the reflector is on the top and the number is quite a bit lower, resulting in a blurry image. It's a good thing that the Fender Eliminator Kit is so good. 。 The number position does not change even if it is removed, and it was too much trouble to try to force the number up, so I gave up.
Blinker Bracket is very prominent.
I'm not sure if it's the Fender Eliminator or the Blinker Bracket, but it seems to me that the Blinker Bracket is very, very insistent. I decided not to use it.
These are the points that I personally thought "hmmm", but if you don't mind, I think the quality is good enough to buy it and put it on as it is. At least, I don't think it's a "HaGap". I think the quality is good enough for people who don't care about it to buy it and put it on as it is.
I hope this will be helpful.
View detail
Fits: KTM 125DUKE, KTM RC125, KTM 200DUKE, KTM RC200, KTM 250DUKE, KTM RC250, KTM 390DUKE, KTM RC390
The corners turn up
I use it with 125DUKE
On days when the wind is low and Dust is hard to dance around, wipe it clean with a Parts cleaner and let it dry before I put it on, and while it was good right after I put it on, I'm doing a test run on another Custom The corners came off after a few hours or so It's just the corners, so I'm leaving it on, but it could be a little more adhesive
It is a protective film, so it is good as long as it is covered
Like when I failed to paste a phone Film, only around the edges, making it difficult for Meter to be visible It's not peeling off to the part, so I'm going to test how long it will last
View detail
Fits: DUCATI MONSTER 1200, DUCATI MONSTER 1200S, DUCATI MONSTER 1200, DUCATI MONSTER 1200S
Good only in use
It is a rare motorcycle called MONSTER S21200Setc The lack of explanation of the Instruction Manual is a big no-no Because the point that should be the point is not written, many times it is impossible for an amateur to put on and take off the bike It's not easy for an amateur The fit is good Because it is covered by the tail lamp a little, it is the best if it is lowered 1cm later Because there are too many screws, I am worried that it may fall off one day It does its best by tightening the screws View detail
Fits: DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S, DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S
For cars without a Hook
When I changed to a car that didn't have a hook, I scratched my foot where it was located That's the merchandise But when I put it on the top, it's hard to get it out due to Lever's principle
At the bottom, you'll end up scratching that area
Screw lock should be attached
The Hook part looks a bit bent …Stainless Steel Hey
View detail
People not familiar with the installation is Large strange
important point
- Disconnection of Wiring of OEMLicense lamp is necessary
- OEMRubber Bush needs to be relocated
- License lamp, a hole through which Wiring of Blinker passes is quite severe
- A certain degree of tools are required such as Torque
Design is very good. Wiring is so troublesome.
View detail
Fits: DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S, DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S
Elaboration and intensity are reasonably priced and seem to be satisfactory. Since in the case of M400 it comes under a Step mostly even if it attaches this, the ease of taking out of a Side stands hardly improves. Since the portion which hooks a gu
Elaboration and intensity are reasonably priced and seem to be satisfactory.
Since in the case of
M400 it comes under a Step mostly even if it attaches this, the ease of taking out of a Side stands hardly improves.
Since the portion which hooks a guide peg increases, it is a grade of the Massey kana.
intensity is goods which are used if it is other vehicle types which do not seem to have a problem.
View detail
Fits: DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S, DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S
A function has no problem. A thing with the design appropriate for [ for a while / thing ] Yasu considering a price is a difficulty. A place [ color also wants silver other than Black ].
A function has no problem.
A thing with the design appropriate for [ for a while / thing ] Yasu considering a price is a difficulty.
A place [ color also wants silver other than Black ].
View detail