Reviews
Fits perfect with OEM lamp
I like shorter version of OEM rear lamp. I'm happy. If you live in europe you can use original licence plate holder. ,:))) View detail
You can also substitute OEMBracket.
The OEMBracket broke unintentionally and went into Reflector" Les" status.
Although it was difficult to obtain an OEMBracket, Moto Crazy's parts can be substituted for the OEM.
Thanks.
Installation can be done using the Rear Fender intermediate bolt.
The Reflector itself was prepared by OEM, but was repaired inexpensively.
I think it is because it is pointing downward rather than comfortably level, but that would be a judgment call for the inspector in charge.
View detail
fenderless
[How is it used?
Was the one you received as per Image?
It was as expected.
How was your experience with it?
It has a much smarter look.
[Points to note]
If you don't slow down at large bumps, the Reflector may come in contact with the Tire and damage it.
How did it compare to other products?
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Installation is Large
Was the installation difficult?
It is quite Large strange for one person to install.
The License Plate Light cannot be adjusted after installation.
How was your experience with it?
Wiring is almost invisible and looks nice and Refreshing.
View detail
just right (time, size, length, etc.)
[How is it used?
Was the one you received as per Image?
Compact over Image
Was the installation difficult?
Instructions are included, so anyone with tools can do it.
How was your experience with it?
This is my first Fender Eliminator Kit, so I don't know about others, but it's good!
[Included Parts:were they on?
[Was there anything that disappointed you?
None
View detail
Fits: DUCATI Monster 821, DUCATI Monster 797, DUCATI Monster 1200, DUCATI SUPERSPORT 950, DUCATI SUPERSPORT 950S, DUCATI SUPERSPORT 939S, DUCATI SUPERSPORT 939, DUCATI Monster 1200S
It took a lot of work, but Parenthesis is great!
The M821 has a complete design including the Rear Fender, but I still want to make it a Fender Eliminator and have it Refreshing! I bought it because I thought it would be a good idea.
The installation itself was easy, but there were a few troublesome parts that took longer than expected.
I had a hard time 1. removing the pure normal thread screw in the bracket of the blinker and 2. screwing the body of the Fender Eliminator onto the body. I think we can proceed.
Also note that drilling is required when using OEM License Plate Bracket.
View detail
be stooped
The look is quite different compared to OEMFender. You will also feel a strong sense of satisfaction.
I think it is a good idea to check if the included ShortParts are sufficient for the job. I had to run to a hardware store because I was missing the nut that is used to hold the License Plate Bolt. The instruction manual says Original Nut" Original Washer It was stated.
The installation can be done according to the Instruction Manual without any difficulties. However, since the Instruction Manual does not mention how to remove the OEM parts, it is better to check the Service Manual. I was not sure and had to remove the Rivet in order to remove the OEM reflector, but in fact, I was able to crack the Fender without disassembling the Rivet. (Sweat)
The Locktite and Hex wrench were originally owned, and the Hex lobe wrench was bought for the need for T10 and T20.
View detail
Fits: DUCATI Streetfighter S, DUCATI Streetfighter, DUCATI STREETFIGHTER848, DUCATI Streetfighter S, DUCATI Streetfighter, DUCATI STREETFIGHTER848
Large sturdy if you look at the Instruction Manual properly.
AssemblyInstruction Manual is included and it was relatively easy to replace the OEM Blinker.
LED Sequential Blinker (Rizoma (Part Number)):(FR130B)), I had considerable difficulty in replacing it.
The cord storage space is too small and the cords for attaching the resistors are too bulky to store.
So the resistor was connected to Front and somehow completed. But then...
When I assembled all of them, the license plate hid the blinker.
So furthermore, Posh (POSH) I bought an extension bracket 40mm for sequential.
All redone. I enjoyed it for a few days.
View detail
Fits: DUCATI PAUL SMART1000LE, DUCATI SPORT1000, DUCATI GT1000, DUCATI SPORT1000, DUCATI GT1000, DUCATI SPORT1000
Refreshing around the rear!
Although it is not written in the manual, I think that it takes a little time for a beginner because there is an installation order. I think that it is somewhat easy to assemble if you fix the back part that cannot be retightened afterwards first, and proceed with the temporary tightening of the others.
The workmanship is not bad for the price, and Refreshing around the Rear.
View detail
Fits: DUCATI 899Panigale, DUCATI 959Panigale, DUCATI 1299Panigale, DUCATI 1199Panigale, DUCATI 899Panigale, DUCATI 959Panigale, DUCATI 1299Panigale, DUCATI 1199Panigale
Cost-effective!
Many external for vehicles are expensive, using imported products and carbon parts, but I have no complaints with this one The Panigale is a Tail Lamp and Blinker in one piece, and the BlinkerLight is The type that doesn't protrude from the body is popular, but I'm using the LED type of OEM It is very Compact and does not interfere with the body design It is very Compact and does not interfere with the body design I think it's safer because it's easier to check than it is to check the Number angle and the quality Not bad
It's a good costumer!
View detail
Neatly organized around the rear
It took me a while to remove the OEM Fender? Refreshingly, it's nice to see the License Plate Light connected We need to do some processing, but I've been using commercially available Waterproof I changed to Connector and made the coupler to insert and remove the license plate The Cable of the License Plate Light of the product is short, and I am worried about the cable of my F4 In the event that the engine cannot be retracted to the body (under the Tandem seat), the Exhaust There is a hole for the Cable in the SystemCenter area, and the Connector section comes in the hole for the Cable It's not a good idea Cable length should be 15-20% longer than that of the original It's a good way to get it delivered View detail
Repair Parts that you may want to have
I installed KIJIMA's Fender Eliminator Kit It does not have the original markings (triangle markings) I bought it from We-Big because I liked the shape of it and it is co-tightened with Reflector But because the bracket part was long, we re-drilled the hole and cut it short In addition, because it was vertical, it is bent to fit the angle of Number View detail
I'm satisfied with Refreshing Design.
Because it is a type without angle adjustment, it will be a finish that is very refreshing.
However, I feel that the angle of Plate does not match a little with the body of Sharp Design of Seat Cowl, but there are restrictions and restrictions.
Installation is not so difficult, but I had to cut off the car Both SidesLicense Plate Light's Wiring and I hesitated a bit about cutting the new car Wierding just delivered.
The product is solid and made with a thick Plate so it will not stick around while traveling and I am very satisfied as a result.
And, most of all, the packing condition was very good, I was surprised to see that beautifully about the Corrugated cardboard of the outer box was closely tightly closed as it was contained in each bag one by one.
Just looking at the outer box made me like this Manufacturer.
View detail
The location of License Plate Light is ...
Mounting on 16 year model S1000RR.
Installation requires OEM Rubber Push relocation or disconnection of License Plate Light Wiring → Installation, so if you are not familiar with it, you'd better ask Shop to ask.
Styling after installation becomes Race ish atmosphere and it is very good.
Unlike Aluminum, because it is Stainless Steel, there is no need to worry about breakage due to Gold genus fatigue due to vibration, and it is also easy for self-propelled faction to remove Blinker and Number by Circuit travel etc.
The drawback is the increase in weight due to Stainless Steel and the position of the product's License Plate Light.
Because the weight increase of Fender itself is not the weight under Spring, I think that it is necessary for the general public to care.
The problem is License Plate Light attached to the product, this is the current law (Number violation obligation) There is a high possibility of conflict with.
Because the attachment position is close to Number, & Number angle is oblique so the place name Number gets hard to see a little.
This is because there is a possibility that the place name Number may not be completely seen from a car with a high car height, and it is considerable GrayZone against violation of display obligation that crackdown became severe recently.
As Material is Stainless Steel, I think that if you make a little processing and make it a little easier to see, there is almost no problem.
(Although it is a digression, I did not dislike the form of OEMFender, but I fixed it back because the problem of contact with Blinker occurred in & Pannier case installation)
However, since it is a well thought out product as a whole, Recommendation can be done.
View detail
You can refresh it.
I have been using it since just after delivery. I was concerned about fixing the bent crooked bent earlier by a car inspection, so I decided to exchange it. Material : Stainless Steel is strong, Design also complains. View detail
Attachment was not difficult in comparison and it carried out it as Number light needed to be wiring processed.Since the Maintenance nature of F3 was not so good, troubles were merely suffered in the neighborhood.Although it is felt refreshed compared wit
Attachment was not difficult in comparison and it carried out it as Number light needed to be wiring processed.Since the Maintenance nature of F3 was not so good, troubles were merely suffered in the neighborhood.Although it is felt refreshed compared with the
NORMAL, it becomes smart and I think that it is good, it is worrisome to tremble with the vibration at the time of an Idling with vigor with a splendid Blinker.
View detail
Fits: DUCATI MONSTER S2R, DUCATI MONSTER S4R, DUCATI MONSTER S4Rs testastretta, DUCATI MONSTER S4, DUCATI MONSTER900, DUCATI MONSTER620, DUCATI MONSTER400, DUCATI MONSTER1000
It exchanged from the unfashionable pure Fender and felt it refreshed. It is because the conclusive factor which purchased this Fender considers the Regulator [ any ] move. It is dramatically attractive as a (I saw by someone's blogs) Aft
It exchanged from the unfashionable pure Fender and felt it refreshed.
It is because the conclusive factor which purchased this Fender considers the Regulator [ any ] move.
It is dramatically attractive as a
(I saw by someone's blogs) Aftermarket parts.
View detail
Fits: DUCATI PAUL SMART1000LE, DUCATI SPORT1000, DUCATI GT1000, DUCATI SPORT1000, DUCATI GT1000, DUCATI SPORT1000
[Webike Monitor] Since Dealer 取り付けて was not pleased with the Design of the らった Fender less kit at the time of Motorcycle purchase, either, it purchased. attachment checked what since it was not itself, had happened Fender-less-ization to where, a
[Webike Monitor] Since Dealer 取り付けて was not pleased with the Design of the らった Fender less kit at the time of
Motorcycle purchase, either, it purchased.
attachment checked what since it was not itself, had happened Fender-less-ization to where, and since it was the work of つつ, it suffered troubles.
after
attachment -- rear が -- since it became イイ touch shapely, a Design is satisfactory!
-- it being attachment of a Tail lamp and however,
I was allowed to be referred to as ?1 in that & Spacer with the insufficient (it corresponds by the Stainless bolt which is 15 mm -> 25 mm of attachment) die length of an attached Bolt was necessity (it corresponds by a Grommet on hand).
View detail
Fits: DUCATI ST2 S, DUCATI SS900 ie, DUCATI ST4s, DUCATI ST4, DUCATI ST3, DUCATI ST2, DUCATI SS750, DUCATI SS1000, DUCATI SS900 sport, DUCATI SS800 sport, DUCATI SS750 sport, DUCATI SS900 sport, DUCATI SS800 sport, DUCATI SS750 sport
The goods here were chosen in order he will have a feeling that the rear circumference of SS800 is heavy and to attach a fender less kit. Although there was also a slightly troublesome portion, attachment could be attached to good touch and satisfied
The goods here were chosen in order he will have a feeling that the rear circumference of SS800 is heavy and to attach a fender less kit.
Although there was also a slightly troublesome portion, attachment could be attached to good touch and satisfied very much.
The number LGT of LED merely attached with the regrettable thing, the tune worsened immediately, and it exchanged for commercial LED.
View detail
Fits: DUCATI MONSTER S2R, DUCATI MONSTER S4R, DUCATI MONSTER S4Rs testastretta, DUCATI MONSTER S4, DUCATI MONSTER900, DUCATI MONSTER620, DUCATI MONSTER400, DUCATI MONSTER1000
[Webike-monitor] structure is very solid and appearance also became quite good. However, when simultaneous wearing of the number frame of DUCATI JAPAN was carried out, it was hard to tighten the bolt which fixes a number and a number frame, and was no
[Webike-monitor] structure is very solid and appearance also became quite good.
However, when simultaneous wearing of the number frame of DUCATI JAPAN was carried out, it was hard to tighten the bolt which fixes a number and a number frame, and was not fastened perfectly.
since -- although four stars were used, the goods themselves are very good goods.
View detail