Reviews
I hope this is helpful to you.
for DUCATI Parts with a little modification to BMW.XR. View detail
Fits: DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S, DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S
I took it for granted, but …
DUCATI doesn't have a stick to make the side stand easier, which is common in Japanese cars.
It's hard to STAND.
Thanks to thisParts for the help.
View detail
Fits: DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S, DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S
essential
I felt that SCRAMBLER was difficult to take out Side Stand, but I was able to make Stand End I thought I could manage to put it on, but in the end I couldn't, so I installed it after a while since I bought it
After I installed it, I wondered why I didn't install it sooner..
Installation is a Universal Product, so some tolerance is needed, but it is not necessary to tighten it I thought there was a possibility of loosening even if I got into it, so I made STANDBody to prevent rotation I applied Locktite to prevent it from loosening
View detail
Fits: DUCATI 1098, DUCATI 1198, DUCATI 848, DUCATI 1098, DUCATI 1198, DUCATI 848
Helpful Items
Because there is no SIDEStand Hook on the motorcycle that I purchased, it is a substitute for Size I bought it after checking only
It's not pushed as a compatible car, but I managed to install it safely and it's easy to put the Side Stand in and out It's easier now
To be honest, I was worried about the tapered shape of the tape to make it fall off, so I decided to stop the hexagon nuts of both SIDEs from loosening Quantity from the back part as it looks like a Nut:Screw lock was applied to Set Fixed Bolt
Because it is a product that does not have a welded structure and is light, the side stand can rattle when there is a slight difference in level I've been able to use it comfortably so far without dancing, so I'm evaluating it with high hopes
View detail
Fits: DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S, DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S
Although it is not troubled even if it does not need it but a little convenient if there is
It does not mean that the performance improves, there is not a Dress-up effect
No need to worry about it without it ? ? ? But if there is something that is a little useful Items.
The front of Side Stand is just a bit out behind the footpeg
I thought that it was hard to put out from before, but thanks to this product
A little Stress when stopping is gone.
For installation on SuperSport S you have to reverse Screw and Nut
Something's Parts (QShifter?) Since it interfered with it, caution is required when installing.
Also, confirmation of the mounting position is necessary to be done with the Side Stand raised
Because there is no Center Stand or Maintenance Stand, it is a little Large strange.
After installation, I have only gone 1 to 2 times yet
I confirmed Screw and Nut I was able to confirm looseness.
I plan to regularly check loosening, but if you feel relaxed
We are planning to consider using anti-loosening agents.
View detail
It is unexpectedly hard and thick
I am putting a Motorcycle in a bicycle parking lot on the Concrete floor. Side Stand scratches on the floor and purchased to prepare the underlay before complaints came out.
It is not that I do not like it, but for comparative study, even if we search similar items with Net, it did not quite hit and it was only this. It is a clearance product.
I thought that it was a soft material like just a round Felt, but the back side is a Plastic board of slickle, the surface is textured plywood, there is the smallest limit decoration as well, I think that it is not ashamed also at the bicycle parking lot.
I think that it will disappear if you leave it in the outside bicycle parking lot. I think that it is an indoor limited item.
Size is about 20 cm in diameter.
The price is a bit high, is not it?.
View detail
Fits: DUCATI 1098, DUCATI 1198, DUCATI 848, DUCATI 1098, DUCATI 1198, DUCATI 848
Excellent
In the case of NORMAL, behind footpeg, a little bit of protuberance will hook the heel.
I got used to it now but I can not deny the feeling of uneasiness unless I look at it all the time - - -
I placed it between the Clutch pedal and the footpeg, made a sure "hit" position, and raised the usability.
If you have a habit of putting your toes under Clutch pedal, there is another danger if you do not care about riding.
View detail
Fits: DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S, DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S
It is inconspicuous in a good meaning
Side Stand became a deep position and it was hard for Side Stand to straddle while crossing, so check STAND diameter and purchase.
Installation itself is easy for Bolt fixing itself.
It took a while to determine the mounting position with the Side Stand raised.
Even with the STAND raised, it was hard to see visually from the straddling state, I thought it was a little longer but no problem at all.
When I put a heel in the tip part of STAND it became easier to put out very much as I became able to lower STAND.
View detail
Fits: DUCATI 1098, DUCATI 1198, DUCATI 848, DUCATI 1098, DUCATI 1198, DUCATI 848
[Webike Monitor] It Is not obtrusive and is nestling up to the Side stands quietly. Although it is seldom conspicuous, a wide swing (smile) when taking out a STAND certainly can be prevented! It is perfect when it is a Reasonable, in addit
[Webike Monitor] It
Is not obtrusive and is nestling up to the Side stands quietly.
Although it is seldom conspicuous, a wide swing (smile) when taking out a STAND certainly can be prevented! It is perfect when it is a Reasonable, in addition a price to a slight degree.
View detail
Fits: DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S, DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S
I have you choose it as a Monitor lately -- thank you, it carried out now [ Onza ]. Since rain stopped today, it attached instantly. attachment was performed having made the cameraman the bride and getting him from him. Although it was made the
I have you choose it as a Monitor lately -- thank you, it carried out now [ Onza ].
Since rain stopped
today, it attached instantly.
attachment was performed having made the cameraman the bride and getting him from him.
Although it was made the place which actually straddles repeatedly and is the easiest to take, when becoming, br(ing) > attaching as a result in the direction quite under a STAND, a tool did not enter, but
positioning was performed, standing, supporting and getting a Motorcycle from the bride.
♪
which became a very good condition by
favor -- if it carries out to a Touring several times and will be satisfactory from now on in the present position -- increase -- a bundle -- I would like to make the hole of the prevention from rotation in the place of the setscrew of M5 with a Drill
this time -- thank you, it carried out now [ Onza ].
View detail