Reviews
Fits: KAWASAKI ZX-10R, KAWASAKI ZX-12R, KAWASAKI ZX-6R, KAWASAKI ZX-9R, SUZUKI GSX-R1000, SUZUKI GSX-R600, SUZUKI GSX-R750
Well built. ??
Satisfactory construction and Cool?.
I thought it was good enough to show people.
View detail
Anyway, it's expensive!
[Personal Thoughts
Good impression
Looks great! It also improves the footing somewhat!
Bad impression
It is shaped to prevent the body from falling backward for the Drag race, but it seems to be effective only when the body is bent over in a forward leaning posture. If you sit on it normally, you might slide backward. I thought it should have more angle.
Seat is much harder than NORMAL.
The fabric makes the seat slippery and my butt slides around.
Bracket needs to be adjusted because the mounting bolt does not fit easily.
The back of the Seat is very poorly made. There are many scratches on the back of the Seat, which are caused by cutting the excess fabric with a cutter. (Lol) SeatSome stains are stuck in the gaps between the seams that can't be removed.
Na! Ni! Yo! Ri! … It's crazy expensive!
With an outside Seat, you can buy two.
I would have preferred to buy an OEMColored Seat?
View detail
Looks better suited to the Monkey 125 with an incredible intake sound
About quality and texture, I can confirm that the quality is great and that the materials used are a aluminum tubing, reinforced silcone coupler, stainless steel hose clamps and a water proof air filter. About the feeling of use, The ram air intake kit is much more compact when compared to the original air filter setup and looks better suited to the Monkey 125 with an incredible intake sound that is generated from the little motor. Products to buy together, While looks and sound are improved over the original setup, the negitive aspect that this setup brings is a lean fuel condition due to the additional air. Selecting a fuel controller to correct this problem would be ideal to also add to your cart. Difficulty of installation, I can say the fitment of the ram air intake kit for my installation was of average difficultly due to the access required to remove the original air filter setup and also position and secure the silicone hose to the throttle body. Cost performance and comparison with other products, The pricing of this product is high but worth the extra cost if you take into account the water proof and cleanable air filter that will see you through many years of use. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Mounting after Lowdown
I had been using OEMSTAND for lowdown, but the motorcycle was in a standing position when stopped, so when I turned off the handlebar and stopped it, it was about to fall over. View detail
BROCK'S Ram Air Intake Kit
About quality and texture - Top quality. Very happy with the polished finish on the aluminium intake tube and the water proof ability of the Sprint Filter. About the feeling of use - This air intake kit looks a 1000 times better then the OEM Honda airbox and that was the main reason behind installing it on the Monkey. There maybe a slight performance increase on a stock 125cc engine but nothing to rave about. Products to buy together - I find when you remove the OEM Honda airbox for an after market intake it does leave a large gap on the left hand side below the fuel tank and I would recommend adding the horn relocation bracket from Kijima to fill that void. Difficulty of installation - Pretty straight forward install here and no special tools required. You should have the old airbox removed and new ram air intake installed in under an hour. The intake tube can be positioned in a few different angles depending the look you're after. Cost performance and comparison with other products - This kit is expensive compared to the one available from Kitaco but I find the parts in this kit to be of a better quality and the look of this kit was what I was after. About shipping and packaging - Sea freight is my preferred shipping option and usually arrives in Australia in 6 to 8 weeks from dispatch. Always well packaged to ensure parts arrive safety and are ready for use. Any concerns, cautions, or advice when purchasing - If you are looking for that slight performance increase from the air intake but do not want a loud intake like this one is, I would suggest purchasing the power air filter from Takegawa that fits into the OEM Honda air box. View detail
Impression used
The welds are messy, though they look nice at first glance.
The Blowby insert is thicker and much shorter than the picture, so it is difficult to plumb.
I think it's an effective Parts for about 3000-6000 revolutions.
View detail
Heat resistance
Large sturdy even as OEM, but ensures peace of mind View detail
Fits: KAWASAKI H2, KAWASAKI H2 SE, KAWASAKI H2 SX, KAWASAKI Z H2, KAWASAKI H2, KAWASAKI H2 SE, KAWASAKI H2 SX, KAWASAKI Z H2
superior article
I was wearing Lowdown of Green color, but I could not confirm the effect so much and replaced it. I bought a new one. It's a great product.:The up and down is as described. We recommend you to change the stand when you lower the bike by 30mm. View detail
protection
Excellent heat resistance, Pannier case and contents are safe View detail
Happy with the Adjustable Stand. (Prices are high.)
I shortened the overall length of the rear suspension and amp;-20mm Lowdown Link was installed to make the body posture correct when parking.
The work is done in the Center (Rear) It's easy if you have STAND or Jack.
(Spring hook required)
If you lift it up with the Jack, be careful not to support the footpeg area, as it will interfere with the Side Stand replacement.
The other side of the Bolt is the Nylon Lock Nut, so be careful when removing it.
good point
It is adjustable, so you can change it to your liking.
It comes with a screw locker to stop it from loosening when adjusting.
It is well made and has a good texture.
Inadequacy
Because the potch of STANDSensor is Limit, I become anxious whether Large is durable with this, but at present Large seems to be durable.
It's a little harder to do than the OEM because of the shorter leg-hanging point when you let the STAND out while you're in the car.
The installation surface is slightly tapered, and even if the angle changes, the way it is hit seems to be Large sturdy, but the area is less than the OEM, so you need to be careful on uneven ground. (Especially the campers.)
View detail
I was able to get the degree of Lowdown I thought I would
His 155cm wife's dream is to ride a ZX-10R Unfortunately, she has legs … I did a lot of research and used this product I can't get both toes on the bike, but I was still able to ride the 10R, which is my dream I think it is satisfactory However, when there is Large Gap, Frame interferes with it, and the ride is a little bit bumpy It is View detail
Fits: KAWASAKI Ninja H2 SX, KAWASAKI Ninja H2 SX
Treatment of the edges
To the Pannier case of KAWASAKI ninja H2SXSE+'s OEMOption Material is Material:Carbon but simply Cutting with the bottom of the Pannier case aligned with the bottom of the Pannier case It is only in the state of being done
The accuracy of cutting is not so much, and in addition, there is a frayed Carbon fiber, which is attached to the This requires a little bit of work, as it requires reinforcement (gluing the edges together so that the fraying doesn't spread) with the adhesive of It is
View detail