Reviews
Fits: YAMAHA YZF-R25, SUZUKI GLADIUS650400, SUZUKI WOLF250, SUZUKI INAZUMA400, KAWASAKI ER-6f, KAWASAKI ER-4N, SUZUKI SV400, SUZUKI SV400, SUZUKI RGV250 (Gamma), SUZUKI GSX400, SUZUKI GSR400, APRILIA RS250 (Aprilia), SUZUKI GS500, YAMAHA YZF-R3, YAMAHA RENAISSA, YAMAHA YZ450F, YAMAHA YZ450F, YAMAHA YZ450F, YAMAHA YZ450F, YAMAHA YZ450F
Delivery time was fast.
I thought they were out of print and hard to find.
I am relieved to hear that it is compatible with current vehicles and will be readily available for some time.
View detail
Fits: KAWASAKI VERSYS(KLE)650, KAWASAKI VERSYS(KLE)650 ABS, SUZUKI DL650 V-STROM, KAWASAKI W800 STREET CAFE, APRILIA RS250, SUZUKI GS500E, KAWASAKI VULCAN(EN)650S SE, KAWASAKI Z650, KAWASAKI Z650 ABS, SUZUKI SV400N, SUZUKI SV400S, SUZUKI SV400, SUZUKI ST400 TEMPTER, SUZUKI SAVAGE400(LS400), SUZUKI INAZUMA400, SUZUKI GSX400 INAZUMA, SUZUKI GSR400, SUZUKI GS400E, SUZUKI GLADIUS400, SUZUKI DESPERADO400X
17T front sprocket for W800
The sprocket has done exactly what I wanted it to do, brought the revs down for any particular road speed. Now my speedo reads about 5% lower than the actual road speed, and I can cruise at 100 km/h without vibration. View detail
Fits: KAWASAKI VERSYS(KLE)650, KAWASAKI VERSYS(KLE)650 ABS, SUZUKI DL650 V-STROM, KAWASAKI W800 STREET CAFE, APRILIA RS250, SUZUKI GS500E, KAWASAKI VULCAN(EN)650S SE, KAWASAKI Z650, KAWASAKI Z650 ABS, SUZUKI SV400N, SUZUKI SV400S, SUZUKI SV400, SUZUKI ST400 TEMPTER, SUZUKI SAVAGE400(LS400), SUZUKI INAZUMA400, SUZUKI GSX400 INAZUMA, SUZUKI GSR400, SUZUKI GS400E, SUZUKI GLADIUS400, SUZUKI DESPERADO400X
After I bought R1-Z at second hand, I decided to replace the front and rear sprockets and chain when the travel distance exceeded over 10,000km.I was worried that it might be hard to remove the original sprocket, but the job wasn't that troublesome af
After I bought R1-Z at second hand, I decided to replace the front and rear sprockets and chain when the travel distance exceeded over 10,000km.
I was worried that it might be hard to remove the original sprocket, but the job wasn't that troublesome after using a gas torch, CRC (anti-rust lubricant), and a spinner handle.
I also exchanged the lock washer and nut, and changed to 13T from 14T to improve the acceleration performance.
I think it actually has become better.
The maximum speed should have fallen, but I don't mind, for I don't drive in such high speed. I think it was a good choice.
View detail