Reviews
Cool!
The WR250X with the front end lacked rigidity even when driven at 140km at full normal I wasn't sure of the effect as I didn't feel any lack of or installation feel But it's cool! Maybe that's the only reason to put it on
It interferes with the Hand guard of the Mounted type in Fork Cramp, so that's the only problem Caution
View detail
Recommended
I wanted a stable feeling when cornering the JC61 late model groms, so I was looking for a Stabilizer It is very easy to install After the installation, the stability of the front end of the car is clearly increased and the feeling of grounding is stronger The sense of stability at the brake is also improved View detail
Fits: YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X
The bremboBrake of my dreams
This product allowed me to install my dream Brembo racing
The hole on the Small side is a little larger than the Bolt, and it is not stable in the direction of rotation It was a difficult point If you apply strong Brake, the edge of the Pad will be gapped upward a few degrees, and the edge of the Pad will not touch the Rotor It will be gone I'm going to have a local ironworker make it just here
View detail
Fits: HONDA , HONDA XR400 Motard, YAMAHA , YAMAHA WR250X, その他
Good
I don't know how to change the handling because it was installed soon after I got the bike
For the time being, according to the construction examples and instruction manuals I've seen on the Net, I'm going to use the following methods Anyway, carefully erase Rim's bumps, Double-sided Tape, and Protective Tape for time Hang and paste
Spoke Wrap was applied at the same time, and since this was the first time to hand assemble a Tire, we were able to make a large body per Large It takes about 5 hours to remove it from the body of the car and install it
I'm doing that well, so I didn't fail, but, well, it takes the strength of my fingers
I installed it because I'm afraid of Puncture and Tube is annoying
Anyway, if you take it easy and don't compromise, and work on it like you're killing time on vacation, you can't fail I guess
View detail
Has FrontSteering stabilized?
I put OHLINS in my late Grom's Rear and the Front felt soft Are the fronts OHLINS? and Front as well, I knew it would take a lot of work and cost to include them, so I kept worrying about it!
If you put this product in the Net Information Put a light Steering Damper in there to stabilize the Front This is why we introduced it because it doesn't cost much
How does it feel to run? Steering has stabilized a bit? That's about the extent of it, and it's difficult for me, an amateur, to put WhiteBlack on... (^∇^;)
However, the texture around the front of the car was improved and the feeling is not bad, so I think it's a good value for money I have no regrets as
I don't know because I never rode the MODEL of the first half of the year, but perhaps the second half will be more Front I'm guessing from the Net information that it has been improved so that the In the case of the model, the change of the fluffy feeling of the front is smaller than the previous model I think that's a good idea
The Instruction Manual is a bit confusing at times, so I'm going to have to do some more I thought it would be nice for User to carefully write the order in which Washer and colors are stacked
Because I think that the direction of the Front can be improved to stabilize, the angle of cut of the Handlebar can be improved a little I know it's going to be small, but I think this Cost would have Merit if you introduced it
View detail
OUTEX Clear Tubeless Kit
I ordered the kit 17-18×2.15 to use for my motorcycle until now for 10 months. This one is very good and easy to install. After using it, I am very assured for long trips View detail
It's really good
I installed it on my MONKEY125
Conclusion
It sticks
But..
It's gutted and interfering with Air Cleaner BOX
The protrusion in the box got in the way
It may not have improved performance as much as Grom
Just don't shave or cut it
It can be installed, but it can be done
I haven't driven the distance since I installed it
There may be some problems later on
I'll add more if there's anything else
Also, this funnel itself is easy to install
Cover next to the Air Cleaner Box (?) When you remove the
Take the Screw at the bottom and remove it while pulling it forward
The key-shaped plastic claw at this point is very difficult to remove
I had a hard time installing it
If you do it in the cold season, it might break if you do it badly
Be careful
The Throttle's stickiness is a little better and
Slightly improved elongation at high load
The intake sound is not very loud
The high rpm range feels less clogged like they changed the exhaust system
I felt so good that I didn't know how much it would change
I think the cost-effectiveness of the project has been relatively good
View detail
I hope the vibrations don't go away completely
Used by Aprilia TUONO 1000
I bought it because I had a vibration in the Handlebar at around 5000 rpm After installing it, I was happy that the vibration was gone and then it started vibrating at around 3000 rpm Not to the point of numbing my hands though!
However, I feel more secure against contact and falls
If it was less expensive, it would have gotten a better rating, but it's just too expensive Or is it?
Well, if a 1000cc VTWIN can reduce the vibration so much, it's a good thing
View detail
Fits: KAWASAKI KSR-1, KAWASAKI KSR-2
I got the Center on time!
front color of the NSLWheel on KSR for Race
The centering is different for each company, but this product does not require meter gear
I got the most Center!
Unfortunately, meter side is not with Stages, so BearingRubber Bush mounted
Leave the color as it is in the Quantity:Set is not possible
Only the meter side is used with Stages
View detail
It looks cheap compared to the Lever Guard
The quality of the Lever Guard is so high that the Color:Unpainted Material:Plastic looks cheap
Or are you assuming that the buyer will paint it to their liking? I'd be willing to pay twice this price if the texture was better
I don't know the effect
Well, I've had bugs and stuff on my hands in the summer so far, but do you think that will go away? I don't think it's going to keep the winter cold out Maybe
View detail
Is the durability good?
I used it for WR SilencerOH used in Race. It is the second Repeat.
Although there are people who substitute Stain Wool such as 100, it is recommended that you purchase exclusive items as well.
Heat resistance is different and it is easy to wind without gaps. Especially OUTEX 's Stain Wool is wrapped like a gumte, so it is easy to wind up pulling. Although I took Wool for the last round this time, it seemed to be used still more! Although Glass Wool was scorching, it never faded away and the function of Stain Wool was played well!
We recommend outdoor, gloves, Mask as fine scraps come out when winding.
And if the price is a bit cheaper ? ? ? I think.
View detail
Fits: HONDA CB250RS, HONDA GB250 Clubman, KAWASAKI estrea, YAMAHA SR400, YAMAHA SR500
Attention on purchasing at ESTRELLARS
ESTRELLARS 'Wheel is slim in both front and back, coupled with the strength of the adhesive strength of Tape coupled with the strength of Tape' s bending, so it is difficult to fix it, so if you think it failed, cut it once again between Nipple and Nipple and paste it better. Please be aware that there are items that only one of the items of Front and Rear Set is included in this product !!
(The image is the same)
View detail
If the installation is Large (Lol)
We installed Front and Rear.
Parts of Front are different in Right and Left. (≧ ∀ ≦) )
Rear is Quantity : Pair (for Left and Right) Both parts were same parts.
The Front is also somewhat difficult to install, but somehow you can use the tool well, but the Rotor side is struggling (Lol)
Rear is struggling with disc and Sprocket (≧ ∀ ≦)
It took about an hour and a half to install both before and after (≧ ∀ ≦)
Regarding accuracy, I really want to run and check.
I fixed it as free as possible, but I am worried about running at high speed.
I will check next time in city high speed!
View detail
The performance is wonderful.
I attached it to MT-09.
Although I was not concerned about vibration, I was looking for Lever Guard, found this item and bought it.
After wearing the engine, I realized the effect of vibration reduction immediately.
I am also solid, so I think the role as Lever Guard is as expected.
Just a shame point,
Lever Guard had two dents in spite of being a brand new.
Considering that the packaging was solid, it is not a scratch attached at the time of transportation, I guess a bit ,,,.
One other point, Bolt of the portion to attach the weight of Lever Guard who had a dent was too hard to conclude with consideration of Lock nut.
View detail
Fits: YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X
Collaboration with OEMScreen! It was able to install as well
I finished installing it successfully (≧ ∀ ≦)
It took time to install because it was troubled how to do OEMScreen collaboration of Y's GEAR (Lol)
Fearfully mounting and retightening while confirming.
I was able to install it safely without mounting load almost required!
View detail
Good Product
Installed this kit on my Zephyr 1100.. It was pretty easy and everything fitted perfectly. Instructions were good, and there is a video on youtube. The valves were a little long, but no prob View detail
It's not looks Parts!
Blur of Handlebar at 70 ~ 90?
Although it was alleviated by attenuation adjustment, it happens occasionally, but it has never occurred since installing the product!
Handling is also not heavy translation feeling.
Is it the best look?
View detail
It is a wonderful performance.
We installed the LCIExhaust System on the Deer bell in 2016. Because it became a catalystless, I was concerned that exhaust gas Gas while driving was quite odorous.
After installation it became the smell of OEMExhaust System Level!
The volume does not change much and I feel it is somewhat VolumeDown! Power was feeling a little Mild! The installation is completed by Small machining.
View detail
I am pleased with the attachment.
To ZrX 1200 R - It is used with a combination of HeatMagic 4-2-1 Full Exhaust System.
φ60. It is really attached to 5.
About half a year after installation, traveling about 5000 km.
Feeling a slight missing of medium and low speed when it is a conventional full straight.
Us vehicles - It seems that it was compatible with Full Exhaust System.
The characteristics after installation became able to be misplaced.
It became a feeling that the medium low speed Torque gushes out with a morimori.
However, it can not be denied that a little sacrifice at high rotation.
Just high rpm is not what you use
Originally it was easier to ride with Torque type Engine
I was told that it was exactly right for me that the town ride & Winding is the main.
The fuel economy was slightly Down.
I think that I will probably keep using it as it is.
I wonder if the price setting is a little lower, I think this evaluation.
View detail
Improvement of foot strength !! Ride taste Check now!
【Applicable model】
KTM 690SMC-R 2012 year formula
【Deciding factor of purchase】
The Lowdown width was selectable
【Use】
From the toe state of one foot, it changes to the feeling that the thumb of both feet sticks, with signal stop
There is no need to shift the buttocks.
If you get on the street, how can the feeling that the thumbs of both feet touch
I am realizing.
I set it to 11 mmDown, but when raising the foot when crossing Motorcycle
It became really easy.
Because I only have to take a city ride, I can not feel the change of riding taste yet.
I felt like I felt it was difficult for the Front to rise...
This is because you changed the amount of protrusion of Front.
I'm looking forward to improving the sense of stability when attacking Corner.
【Installation】
I asked Motorcycle shop.
【Point of installation and hang】
I lowered the front as much as I fell back..
Rear 11 mm Down and the Front protrusion to 8 mm.
[Is there anything I was disappointed about?]
There is none.
【Hope for Manufacturer - Please let me know if you have any improvement points]
You can select 4 stages of Lowdown, but the recommended protrusion amount of Front
It is still nice if you have it in the Instruction Manual.
【Have you compared items?】
It is Koubalink Lowering Link. There is little information, reliable OUTEX
It's up to you to decide.
[Others]
It is a well thought-out item. OUTEX is awesome.
View detail