OUTEX Motorcycle Reviews - Webike Thailand

Filter

Write a review and get Webike Points!

Reviews

OUTEX Frame Cap Clear all

[Optional Parts] Hand Protector XA for Vibration Absorbing Lever Guard S-R-X

OUTEX

22 Oct 2016

stem stabilizer

Fits: HONDA GROM, HONDA MSX125

Japan User(translated)

4/5

I upgraded the stability feeling to the Large width.

【What made you decide the purchase?】

I was worrying about it for a while, and my acquaintance was installing, I bought it when I heard the effect.
【How was it actually used?】

Grom 's soft Front fork becomes a little tightly.
Although the movement of Front fork is also improved, because steps can not be stepped on, the steps etc will not change, it will be don!.
The sharpness of straight-ahead Handlebar will disappear and it will be easy to ride.
Because I attach Handlebar Stopper, Small turning becomes worse.

【Was it difficult to install? (Hard parts case)】
I heard that Bolt is stiff, but if you prepare an accurate hexagon you can remove it without problems. I tried to install because the size of the hexagon was different on the upper and lower sides, but I finished it safely with the prescribed Torque with the hand tool. Regulation from NORMAL Torque is low, so be careful.

【Please tell me the point of installation and hang (in the case of Hard parts)】

I also wrote the above, it is not so difficult if I move forward one by one firmly.
Tightening properly will cause problems such as thread cutting and mountain crushing.
Let's secure it in Torque wrench for safety.

【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) ]
[Is there anything I was disappointed about?]
Instruction Manual is easy to understand, even if you are an amateur you can do with tools. But I wonder if the picture of Instruction Manual was hard to see ...

【Hope for Manufacturer - Please let me know if you have any improvement points]

Performance is satisfactory, but if the price is a little cheaper it is a full mark.
【Have you compared items?】
None
[Others]

When Air Filter is replaced with Takegawa or Endurance, Bolt seems to be hit by Air cleanerBox.
I was hitting the acquaintance, but he said that there was no problem.
And, it has become convenient to the ground sometimes.
When hanging Handlebar Lock, when it was not attached, it was locked a bit back from where you completely cut the Handlebar, thanks to the included Handlebar Stopper, the fully locked state becomes the position where the Handlebar Lock is possible and the lock is easy became.
It is convenient to the ground. View detail

OUTEX

06 Sep 2016

Clear Tubeless Kit

Fits: Others , KAWASAKI D-TRACKER-X, KAWASAKI D Tracker, その他 , KAWASAKI D tracker, KAWASAKI D Tracker X

Japan User(translated)

4/5

The range of Tire selection spread

Regarding installation, we carefully read the Instruction Manual, and after Image Training by watching YouTube's enforcement video several times. In the operation work, I thoroughly cleaned the BALI and degreasing of the welding part of Rim.
Because it was work in the room in the midwinter, we took advantage of kerosene Stove and Dryer to improve the adhesion of Tape. Preparation is important.
Once you have done so far, you just paste the tape straight. Even if a little air bubbles entered the air did not leak.
At first it is recommended to stick from Rear, because Rim width is overwhelmingly easier to paste, so it will be practice.
All we have to do is quickly install the Tire and fill the Air pressure higher.

I used imprints, but honestly I did not feel the weight under spring weight.
I think that spreading the range of Tire by putting Tubeless tire is Merit of the largest Large. View detail

OUTEX

06 Dec 2015

Clear Tubeless Kit

Fits: APRILIA SXV450, APRILIA SXV550, DUCATI sports classic, DUCATI Pole Smart, KTM , Norton command, SUZUKI , SUZUKI DR-Z400SM, TRIUMPH Thruxton R, YAMAHA TW200, YAMAHA TW225, その他 , その他 , その他 , その他

Japan User(translated)

4/5

Movie attached to YouTube

Off I am enjoying myself to remodel the car to MOTARD.
In my case I run a thousand kilometers a day or more, than lightening around the foot, correspondence at the time of Puncture and Spare Tubeetc. Purchase for luggage reduction. I constructed it myself.
Manufacturer on YouTube has upwarded the animation of the construction method, and anxiety is alleviated.
But construction was a little Large strange.
Rim of KTM 690SMC is good, welding mark etc etc. Even Beauty had been treated, because the thickness was enough, the labor was Large strange but there was not much difficulty.
The thin Wheel felt like using air bite → air leakage. View detail

OUTEX

12 Jul 2015

Clear Tubeless Kit

Fits: HONDA , HONDA CRF1000L Africa Twin, KTM 950 ADV, KTM 990ADV, TRIUMPH NEW Tiger 800XC, その他

Japan User(translated)

4/5

Construction to gain peace of mind during Touring, but thin Rim is difficult

I attached it with DIY on the Tire exchange of TIGER 800 XC. As I go to Hokkaido Touring in the summer, when I puncture in the middle, I can not just repair Tube tire of heavyweight Motorcycle, so in order to get relief,.

Since Rear is Tire Width 150, there is also a reasonable Rim width, so it is OK without problem with the Instruction Manual street. 0 in the first 2 days. I thought it was a failure when the air pressure decreased by about 4k, but after that it has been stable for 2 weeks so it will be Large durable.

For Front, the width to be constructed with 90-width Rim also becomes narrower. Construction itself is the same as Rear but 1 day after Tire incorporation 0. I keep decreasing by 4 k and finally almost entirely dropped. Raise the heavy waist and put water in the taray and check it and there is air from Spoke - - -. When Tire is removed, Lever seems to hit and just the same scar of Elear as Niire as Tire Lever (Tear). Apparently it seems to have hit when trying to organize Tire. Tire Lever is easy to win if it is a thin Rim, after all it has done the same thing again after all. It is stable now, but it would be better to leave the uneasy one to Shop. Especially thin Rim.

Even if it fails, materials are left in for repair, and it is saving if it is easy to repair.
Later release from worry of Puncture repair (You can do with repair kit, you can do it at service station too) Are you Large?. View detail

OUTEX

25 Sep 2013

Clear Tubeless Kit

Japan User(translated)

4/5

In the case of an ELIMINATOR 125, since there is no Size, it is that a maker is consulted with on it.

The price was about about 12000 yen.I think that anyone can do those who can do desorption of the Wheel.For the moment [ ] (equipping about one month), there is also no leak of air, and it has ridden.Considering the thing of the Puncture, it
--Does and there is no loss. View detail

OUTEX

23 Oct 2012

Clear Tubeless Kit

Japan User(translated)

4/5

[Webike Monitor] Although there is [ a rumor that it is serious ] attachment, surely or is not found very much.merely -- never -- very much -- = -- difficult -- coming out -- I think that there is nothing.A Handling becomes light and Puncture repair a

[Webike Monitor] Although there is [ a rumor that it is serious ]
attachment, surely or is not found very much.merely -- never -- very much -- = -- difficult -- coming out -- I think that there is nothing.A Handling becomes light and Puncture repair also becomes easy, and if interested, even if it will do, I think that it is good. View detail

OUTEX

17 Jul 2012

Clear Tubeless Kit

Japan User(translated)

4/5

He thought that he would make it a Tube reply in accordance with the rear wheel having blown out, and it purchased. First, although I who think whether to make a mistake if an amateur also does as a description carefully although construction is fairly troublesome have done fairly suitably, even if it passes half a year, there is no air leakage.
Although purchased by an order Set, since a front wheel is troublesome, it has been neglected to a Tire exchange opportunity.
I also regard that Puncture repair becomes easy on the way as a Merit being large. View detail

OUTEX

30 Jan 2012

Clear Tubeless Kit

Japan User(translated)

4/5

It constructed to around 17 inches of excel rims.
Although it is not easy, also difficultly, there is nothing.
I often read a description and think that it will be satisfactorily done if it is a direction which work can improve perseverance carefully.
Since air temperature was 15 邃?or more recommendation, it constructed in heat gun one hand in the interior of a room into which heating was put.
The case of the Wilkinson ginger ale appeared in 17 inch wheels exactly, and workability was very good.
moreover, although it is in a description, saying alkaline detergent, such as magic phosphorus, is used, since a bath magic clean is neutral, the direction which will work from now on is changed in between -- since a manufacturer, Mr. Outex, answered to the question mail of the from here kindly so that there might be nothing (smile), he can feel easy.
When their eyes are turned only to a material cost, it may think that it is high, but I think that it is cheap enough with thinking including the charge of ideas, and development costs.
However, I think that there should just be a system etc. which are cheap and offer material as relief measures to the person who failed to 1 time since splendid preparedness is required 13 or 000 yen by a one-shot deal.
I was allowed to consider it as four stars based on the neighborhood. View detail

OUTEX

25 Aug 2011

Clear Tubeless Kit

Japan User(translated)

4/5

In the tube-reply-ized thing which attached to our dr-z, since it comes to be light by a tube, the weight saving of about 1 K of the axle part can be carried out.
The touch which rode changes considerably and handling becomes light!! The wheel which I attached is a pure rim.
The pure rim was heard from the mechanic of acquaintance that it will hurt if there is no tube since it is a premise that the tube is contained.
It may be better not to attach, if there is no dissatisfaction in a little uneasy pure state since it is a thing of the quite more able one to say. View detail

OUTEX

27 Jun 2011

Clear Tubeless Kit

Japan User(translated)

4/5

Many things were searched with the goods worried from before, and by the mailing cost lump, since Mr. Webike was the cheapest, he purchased.
It did not take time and effort so much as you were written as for wearing.
It was only anxious so that exhaust air could not be entered as much as possible, when sticking double-stick tape as a place which it is careful of.
It was used in DR-Z400SM this time, and, in the run place and the surprised forge fire, the run changed! Although the tube and the rim tape were only lost, spring Ryo Shimoju's reduction did not think that it was this much effective.
-izing can be carried out [ tube reply ] at this price, and, moreover, a run becomes good!
the direction which considers tube reply-ization and is visible -- serious -- it is recommended View detail