Reviews
It feels like Snap.
The OEM front fork of the GROM is quite fluffy and I wanted to install an OHLINS, but there is no Gold.
Basically, it is a snap, or firm, feeling when the load is applied to the front.
The handlebar is a little heavy while driving, but this leads to stability, especially when entering the corner.
View detail
Fits: HONDA MONKEY125, HONDA GROM, HONDA GROM
My payment includes FedEx cost, FedEx charge me twice
My payment includes FedEx transport to Poland. Now FedEx charge me twice. The handle bar guard is lossen even the screw is very tight, it's slippery on smooth surface of handlebar end View detail
Fits: Others
I appreciate the ability to reuse it.
Used in CT125CT110 HUNTER CUB.
Purchased a Vibration Absorption Lever Guard to install on my CT110 HUNTER CUB, which was used on my 690 DUKE before the switch.
When I pulled out the long, thin washer attached to the Adapter, it entered the Handlebar.
It would be nice to be able to use another type of car in this way.
View detail
Fear Prevention
I bought it because it has Rubber on the Spring and I thought it would help prevent chatter.
It was effective in suppressing the chattering sound.
View detail
More than I imagined!
I bought it because I didn't want to put on quite a bit of vibration + heavy weight due to the single cylinder.
There are many Lever Guard products available from various companies, but we chose OUTEX because Vibration absorption The other reason is that you can install any Bar End you like as long as it is M8-compatible.
There are very few Lever Guard that can put Bar End on other companies… I use Posh's Middle weight (Mud black) in conjunction with the
My impression from using it is that it reduces vibration more than I expected. But of course, it is not Zero.
The performance is unquestionable. But! As others have said, the bolt included is iron, which is not good.
View detail
Fits: HARLEY-DAVIDSON FLHRCI, HARLEY-DAVIDSON FLSTC, HARLEY-DAVIDSON FLSTN, HARLEY-DAVIDSON FLSTS, HARLEY-DAVIDSON FLSTSC, HARLEY-DAVIDSON Sportster 48 XL1200X
OUTEX tubeless kit fit perfectly to my HD XL1200.
Marbles product OUTEX. Less worries when riding my HD Sportster XL1200. Wish to communicate to my fellow HD friends on this product. Will repeat Oder. Thumbs UP View detail
Stabilizer
The rigidity of the Front has been strengthened.
I felt a difference when Cornering.
View detail
Look good, feel great!
Put these, with the hand protectors, on Tuono V4. They really suit the bike and make a huge difference to the vibes through the bar! Didn't use the expansion inserts, instead used a longer M6 bolt, an M6-M8 sleeve, and a spring washer so I could fit it directly to the existing Tuono bar insert and keep the bar end weight too View detail
Work well, look good
Work really well with the vibration absorbing lever guards. Looks great on a 2021 Tuono V4 1100 and has no problem clearing the Aprilia tall screen View detail
Handlebar Stabilizer
I was wondering if there would be some change even with front low down fender, but I have been curious about Stabilizer for a while and now I bought it.
It feels solid around the Front.
I made a good purchase.
I'm worried that the Handlebar Cutting Angle Mounting Parts might come off. (^...^;)
View detail
Lever Guard Bar End
I was fed up with the numbness and tightness of the STD Handlebar, so I replaced the Handlebar and decided to replace the Bar End because the inner diameter was different from the OEM. I bought it.
The inner diameter was slightly reduced and the outer circumference was reduced by 1mm or more.
I heard that the OEM Lever was a winner and I also purchased the Short lever.
Well, the key is vibration proofing, but I haven't tried Touring yet because of winter, but I ran about 60 weeks on the nearby Thousand Meter ShortCourse.
I want you to know that I want you to be able to do the same thing. (・∀・)
It is not Racer, enJOY, but is the vibration of the hand about normal NAKED?
It was no problem at all.
I'm looking forward to spring, which I think will make cruising at high speeds easier.
View detail
emotion
Exhaust System is 60.5 pi Asahina Tube Full Exhaust System.
Exhaust gas smells bad because of catalyst-less straight pipe. Naturally, it is not popular among fellow touring drivers. When I drive in front of them It stinks! It stings my eyes!" And.
I use it for my daily commute, but even after 15 minutes, my clothes, hair, and bag are covered with the smell of gas.
The Level was understandable within a radius of 2Meter.
By adding this catalyst, 、、、、 the smell is really reduced!
I feel 95% less! I'm not lying!
Since the catalyst itself is effective only after it is heated, it smells immediately after startup.
But after two minutes of driving, you'll be amazed. The smell of gas is gone.
I was really impressed with 、、、、 how comfortable it is not to smell the exhaust Gas.
It is not a Baffle and has almost no muffling effect.
Idling has only removed some of the cadence of the sound. (The volume remains the same.)
Power down is almost imperceptible.
However, it is definitely in resistance, so it should be falling numerically.
And yet it has a reliable deodorizing effect. It is wonderful.
I really, really recommend it to anyone who has a problem with exhaust Gas odor. It will make a drastic difference!
A little expensive, but considering the effect, it's a small price to pay!
View detail
happy miscalculation
I purchased it for the purpose of adding Gold colored Parts as a color scheme.
To be honest, I didn't have Large expectations about the performance, but when I rode it, I was Big surprise!
I was used to it now, but the uncomfortable straightness I felt when I first rode the MONKEY125 was gone, and the handlebar operation became more stable and easier to lean on, like a 250cc or larger motorcycle.
I think it would be impossible for a woman to install it alone.
I would like to have a male who can turn the Screw while I give the Stem.
Perhaps if you leave one Bolt and change it, you may be able to install it without changing the Stem position.
Also, we recommend that you install the washers with care, as there are only enough sheets to install all of them without excess washers, etc.
View detail
Installed on FTR223 (Work should be done with plenty of time to spare.)
[How is it used?
Installed on FTR223.
Traveling:40km one way for commuting, touring, and circuit riding
I decided to use them for my long-distance commute, in order to make them tubeless and reduce the weight under the springs.
The front wheel was installed successfully, but the rear wheel failed.
Used for about 2 years.
Was the one you received as per Image?
At first glance, I was a little worried that the Kit would be too large and sturdy. I was worried that it might not be large enough, but it was well thought out and large enough.
Was the installation difficult?
At the time, I had only been riding motorcycles for a little over two years and my kill level was still low, so I took on the challenge of installing it myself. I thought it would be easy, but in reality, it was a difficult job that required a large amount of work.
As mentioned above, the front wheel is easy to work on due to its rim shape, and even though I didn't have enough skill, I was able to somehow install it and make it Tubeless.
On the other hand, the shape of the rear wheel is such that it is difficult to change the size of the wheel. (Kit construction area is very narrow) I was not able to install it properly and failed.
At that time, I couldn't assemble the tires by myself, so I had to bring the tires to the shop that was taking care of me at the time and have them re-fitted a couple of times, which made the president of the shop angry with me.
I removed the Kit from the air leak area and re-installed it, but I couldn't stop the air leak. I even tried using SiliconCoking agent, but it didn't work, so I had to use Rim only tube.
Factors for failure include.
Poor Rim shape
The work was not done carefully and in a timely manner according to the instruction manual.
The construction was done in early spring when the temperature was low.
Could not crimp with the proper tool.
I couldn't assemble the tire by hand, so I couldn't assemble the tire and crimp it using air pressure right after installing the kit.
The following are some examples.
How was your experience with it?
In the front, I was able to lower the risk during puncture due to the loss of the tube, and I realized that the turnaround of the corner was also improved.
Rear ended up not knowing what it did with the weight of Kit+SiliconCoking agent+Tube.
At the time, I didn't build tires by hand, but later, when I was able to build tires by hand, I found that not having a tube was easier to work with.
[Included Parts:were they on?
Yes. Please refer to the product description.
[Was there anything that disappointed you?
The lack of Kill in my work.
I had no complaints about the Kit itself.
Point and hang of installation
Be sure to work carefully and with plenty of time.
Make sure to degrease the Rim thoroughly.
Crimping the Kit with a tool that can apply localized pressure with a round tip, such as a tire lever.
The Kit should be applied in the warmest season possible to increase the adhesiveness of the Kit.
When working in low temperatures, the Kit should be warmed up with a dryer and heat gun.
As soon as possible after the Kit installation is completed, the tires should be assembled and air pressure should be applied.
Do not damage the Kit with the tire lever when installing the tire.
View detail
Fits: APRILIA SXV450, APRILIA SXV550, DUCATI sports classic, DUCATI Pole Smart, KTM , Norton command, SUZUKI , SUZUKI DR-Z400SM, TRIUMPH Thruxton R, YAMAHA TW200, YAMAHA TW225, その他 , その他 , その他 , その他
Installed on Z-WHEEL AR1Wheel (CRM250AR)
I installed a polishing bit on the wheel and carefully cut it, then removed the BALI with a file stick, and finished with sandpaper. If you don't have the confidence, please contact PRO. If you are not confident, it is better to leave it to the PRO. However, since the tube is gone, puncture repair has become much easier. (If it had a tube, it probably wouldn't run.) View detail
Fits: HONDA glom, HONDA MONKEY125
It works!
The Handlebar Guard I had been using is no longer available due to the replacement of the lever, so I installed this.
We had previously installed Posh's Heavy Weight Bar End and AELLA's anti-vibration ring.
I felt that both of them were definitely effective, but due to the increase in width of the car, I took it back and replaced it with this one.
Honestly, I thought it would be … effective, but it's no better than the above two! (= personal opinion)
This product is doubly great because it narrows the width of the car and adds Guard.
View detail
Fits: HONDA glom, HONDA MONKEY125
Do you think the vibration will be that much different?
I've been using it on my DUKE390, and I knew it would be effective in combating Handlebar vibration, but...
On the GROM, it was too small and I couldn't really feel the effect.
But I think it is possible to expect it as Lever Guard.
View detail
Fits: HONDA MONKEY125, HONDA GROM, HONDA GROM
Just like Rumor said, a very effective product!
On YouTube, I saw a guy who rides a Monkey 125 raving about it, so I bought it just to see what he had to say. I did a test run today, and was surprised to find that the vibration was much less than before!
? Lightweight Oil Filter→Cover removed after replacement
?CrankshaftAdapter
?Lightweight Fly Wheel
? Heavy Bar End
I tried to reduce the vibration of the single cylinder, but there was still some left, but with the OUTEX Vibration Absorption Lever Guard, it is almost gone! (I think it's especially bad when idling, but it's completely gone. (It's a miracle for a single cylinder)
Installation is super easy, just follow the instruction manual!
View detail
Front For anti-rattling
You guys talk a lot about rear shocks.
The front of the Grom... Doesn't it have a really crunchy feel to it?
I bought it hoping it would help.
It's not like I'm an aggressive runner.
After you put it on... Well, it's a little better.
I suppose it depends on how you run.
I'd have to change the fork oil and the springs to get to the root of the problem. And the springs need to be changed.
Doesn't it feel right?
The product itself is well made, and the fork synthesis is a product that can be improved.
think
View detail
Stainless Steel Spring
I bought it last time and installed it, but on this touring one of the Springs was missing. I've been pulling on it a lot, so I can't imagine it coming off, so did it break? I hope it will not go missing this time. View detail