Reviews
Let's mute it.
I used it for sound deadening purposes on my vfr750r Lady Bird 4in2in1. The length is 3cm longer and needs to be Cut. The thickness is 45 pi, which is just right. The catalytic converter part is 38 pie, so I used stainless wool to prevent it from rattling. The effect of the sound deadening is good because it became a little quieter. I don't have a machine to measure the sound level, so I am just guessing, but it might be just 99db. The smell of the exhaust gas seems to have been reduced by about half, so I think the purification performance is quite good. View detail
Lever Guard Installation
At first? but after reading the instruction manual for 5 minutes, I could understand it.
Holding a constant RPM on the highway is quite numbing if the RPM is subtle.
This does not eliminate it, but it will be much better.
Grip should also be replaced.
But if it's a 16 year transition, you have to change the Lever or it will interfere.
View detail
Looking forward to Lever Guard and vibration reduction!
I purchased this for Handlebar vibration reduction and lever protection.
At first it was difficult to tell which product could be installed.
I was confused, but in the case of Grom, the OEMHandlebar
Lever Guard is a special type of bolt that is inserted into the handlebar.
If you are using a different handlebar, you need to select and purchase a locking spacer of the correct size for the inner diameter of the handlebar. You can choose the thickness and shape of the lever guard except for exclusive products.
I purchased the 8mm thick one. Installation was easy.
The instruction manual was also good and easy to understand.
If there is interference, there is a Spacer made by the company that can be used.
Adjustments.
View detail
![[Optional Parts] Lever Guard Spacer](https://img.webike-cdn.net/catalogue/images/21889/spacer1_TS.jpg)
For LeverSpace adjustment
Brake and clutch lever are inside the bar end.
OUTEXLever Guard is not a problem if you have
It will be attached directly to the Handlebar End, so it will be attached to the Bar End a little bit.
I wish there was a color setting since the Spacer is Silver on the ground.
View detail
Used for CB1100EX
Tubeless front and rear wheels when the vehicle is purchased
After all, Puncture repair is easy.
This time, the rear wheel Spoke was reupholstered, so I bought it along with the new Spoke.
I could have done it myself if I was calm and did it properly and carefully.
The front wheels have been driven more than 40,000 km and have no problems.
Six Spokes were broken on the rear wheel and air leakage occurred as expected!
View detail
Straight-line stabilityOutclassing
I knew about this Stem Stabilizer from watching youtube, but does it really work? Also, it looks
It looked a bit lumpy and I wondered about the overall balance.
Also, the Rear suspension was replaced with NITRONR1 and the balance between front and rear was poor. I considered replacing the FrontCB400T Spring and Oil, but gave up because of the high hurdle of the replacement work.
So I remembered this product and decided to buy it.
The work can be done without any problem if you have a Torque wrench.
Black is recommended.
Merit
Good straight line stability, so it is not scary to speed out of the car.
Conner is also stable.
The ride is comfortable.
It is not as large as in the photo, and is surprisingly well matched to the car body.
The effect is commensurate with the price.
Demerit
Nothing in particular, but if I had to say, it picks up a little vibration, but not enough to bother me, so it's not a problem.
View detail
Wobble Phenomenon Countermeasures
I purchased this product to prevent the wobble phenomenon when driving at high speeds as well as for dress-up.
The speed at which the phenomenon occurs has changed since before installation.
I liked the presence and look of the Parts.
View detail
Visual is the best
I don't know how it feels after installation, but it can accent the empty front fork. I think there will be advantages over none. View detail
Fits: HONDA glom, HONDA MONKEY125
Vibration reduction
After installing these parts, the vibration was reduced to the extent that I felt that I had been straining my body to suppress the vibration. View detail
Texture and fixation are both fine.
We had been using ZETA's ArmourGuard, but it has been losing its fixation force with each fall due to an increase in the number of fall scars.
We have not tipped it yet, but it is highly rated by surrounding Riders, and although it is Custom against weight reduction, it seems to increase the possibility of protecting the area around the Lever and Reserver tanks.
Also, the vibration absorption, which was the original concept, seems to have been effective, and I feel that numbness and fatigue in my hands have been reduced.
It is difficult to judge whether my physical strength has improved in this area.
Also, as long as the inner diameter of the handlebar is checked carefully, installation can proceed smoothly and without problems.
It is a very Simple product, but I think it is very effective.
View detail
Seeing is believing, and rigidity is up.
It has a good reputation among Grom riders, etc., and I was a bit baffled as to whether it was that effective. But seeing is believing, and it works.
I don't know how to describe it...
At the beginning of the ride, 10 meters in. Front has gotten heavier?" I thought... I've got a lot of weight." I guess that would be an appropriate way to describe it.
That said, it's not hard to turn.
Rather, Corner is calming, you can sense the sus working, and you can leave your body at ease.
View detail
People dissatisfied with Frontosas.
See other Reviews
To the dissatisfied Front fork.
I tried it to see if it really makes a difference!
Since we don't give out that much Speed.
I'm not too sure how rigid it feels.
The feeling of a single center line running through Motorcycle and
Uncomfortable sinking during Breaking.
I felt relief.
Fork oil and spring changes are
It's not easy to afford it considering the labor cost.
For about this price, I'd be satisfied with the effect.
I felt like I was on the Front fork.
I would recommend it to anyone who is dissatisfied.
All you need is a Torque wrench to install it.
I know it's easy, but it's just a place to be.
I thought it would be better if a layman didn't touch it.
I asked Shop to help me.
View detail
It doesn't smell bad.
I changed from Authentication Exhaust of JMCA to a non-approved exhaust system and installed a cheap catalytic converter from Amazon because the exhaust gas smelled bad. The catalytic converter was replaced with a proper catalytic converter. View detail
It's a bit expensive, but the sutra is the same as OEM and the presence is there.
The price is a bit steep, but the product is good. View detail
Fits: Others , KAWASAKI W800, KAWASAKI , その他 , KAWASAKI W800, KAWASAKI
Tubelessness of non-OEMExcelRim
The rust of OEM wheel of CB400SS (especially front wheel rim and spoke) was so bad that we installed OEM spoke on ExcelRim to refresh it. The OEM wheel is 19x2.15MT for FR and 18x3.0MT for RR, but the same size of ExcelRim for FR is only available in WM Type, so it was changed to 19x2.5MT.
I was told by WebikeSupport that they did not know about the compatibility with external Wheels, but after checking the ExcelRim and Size compatibility and assembling, there were no problems.
According to the Instruction Manual, the protruding ends of the spokes are removed with a file (only a few of them are noticeable), degreased, and OUTEX is installed.
Because the rim of the front wheel is narrow, OUTEXDouble-sided Tape stuck to the side of the groove, but because it is stretchable, there was no problem with adhesion of the Spoke nipple, and it did not get stuck when the tire was installed.
If you follow the Instruction Manual, there are no particular difficulties.
I put on the Tire by hand and raised the Bead with the Compressor, which is an on-board tool in the car.
After that, the double-sided tape was left at about 2.5 atmospheres for 30 minutes as per the Instruction Manual, and the pressure settled down to about 2 atmospheres.
I have driven about 500 km since the replacement, including Winding, and it is comfortable with no signs of air leakage.
In addition to the aluminum wheels, the front and rear springs are each more than 1 kg lighter than before, which has clearly improved acceleration and road-following performance (ride comfort), making driving more pleasant.
Although 10,000 yen may seem a bit steep for a mere double-sided tape, it is a reasonable price if you consider that you are buying peace of mind in terms of durability and workability.
View detail
OUTEX Steering Stabilizer
The stem kit comes with all the hardware to mount, installation is simple and requires 2 Hex or 'Allen' style keys wrenches. After being mounted the front end, forks seems a bit smoother with some possibly incresed handling. Steering stabilizers also reduced the vibration and chatter of the the front forks. Outex did a great work on the anondizing of the color. We chose red but you have a few options to pick from. The only drawback is that you lose turning radius but we do not have trails to ride so the turning radius loss is not noticed when riding highway or city. This is a cheaper alternative to purchasing the milled or CNC stems as it gives you similar feel of stability and effectiveness on the motorcycle. Be certain to install your fork bumpers on one side completely before doing the next. (Shaped in the form of the letter 'L') This will limit over-travel of the forks and avoid damage to your fuel tank . View detail
Stem Stabilizer
Items that have been on my mind for a while at Netetc.
After installing it, you can see that the rigidity of the Front is considerably increased.
It feels fluffy→gussied up, and you can really feel the Front sensation.
View detail
Grom Stabilizer
I can't go so far as to experience an increase in rigidity, but I am satisfied. View detail
OUTEX OUTEX Clear Tubeless Kit
I bought it to reduce the load under the spring and to improve the handling of the car and reduce puncture repairs when driving.
Rust removal occurs as part of the preparation of the spoke wheel. This process is very easy with a Router or Belt Thunder, but may take up to 3 days if done by hand with Sandpaperetc.
Double-sided tape and translucent Cellophane can also be applied with surprising ease. Even a clumsy person can do it well.
View detail
Fits: HONDA glom, HONDA MONKEY125
Very good product!
I had been suffering from the vibration of the handlebar, which is peculiar to Groms, during city driving and touring, but this product has made me comfortable. It is a very good product. View detail