Reviews
Fits: HONDA glom, HONDA MONKEY125
OUTEX Vibration Absorption Lever Guard
You can feel the effect of reduced vibration transmitted to your hands when cruising at 70 km.
I use MONKEY as a Tourer and it is perfect for distance gabbing.
View detail
Fits: Others
I bought this as a supplement.
I bought it the summer before last and have had quite a few falls.
Finally, the original round shape was gone, and I decided to buy it again in a Potato-like shape.
As far as I can remember, I fell 7 times on Right and 9 times on Left with SlipDown system, but the Screw hole did not collapse and the vehicle body slid and missed Damage.
I think Slider does a good job including Material.
View detail
Hand guard is not so cool.
I was looking for a different hand guard for my 701SUPERMOTO hand guard because it was too large and not cool enough, and I found this product.
Handlebar inner diameter is 14mm.
All you have to do is remove and replace it, so the process is quick and easy.
I think the Handlebar vibration is suppressed because the Lever Guard tip is shaking when Idling, maybe.
I have no idea how much change there is from the original, since the purpose is to change from the OEM hand guard and not to reduce the vibration of the handlebar.
Refreshing the handlebar area is the most pleasant change.
It is quite solid and seems to protect the handlebar area even if it falls over in the Circuit, although I don't want to experience the effect.
View detail
Fits: HONDA glom, HONDA MONKEY125
Single cylinder as comfortable as possible.
It was installed to improve the vibration of a single cylinder Handlebar as much as possible.
Since I have a Bar end mirror, I didn't think Weight would be attached, so I decided to use this Parts.
It is co-tightened with DAYTONA's Hi-Sider & Adapter and is Large sturdy.
View detail
Fits: その他
Handlebarfor Replacement
I purchased this product to change the handlebar diameter when replacing a MORIWAKI handlebar with a ZETA handlebar. This product is a recommendation because there are many different types of Adapters to fit any handlebar diameter, so you can easily change the handlebar. View detail
Lever Guard Installation
At first? but after reading the instruction manual for 5 minutes, I could understand it.
Holding a constant RPM on the highway is quite numbing if the RPM is subtle.
This does not eliminate it, but it will be much better.
Grip should also be replaced.
But if it's a 16 year transition, you have to change the Lever or it will interfere.
View detail
Fits: HONDA glom, HONDA MONKEY125
Vibration reduction
After installing these parts, the vibration was reduced to the extent that I felt that I had been straining my body to suppress the vibration. View detail
Texture and fixation are both fine.
We had been using ZETA's ArmourGuard, but it has been losing its fixation force with each fall due to an increase in the number of fall scars.
We have not tipped it yet, but it is highly rated by surrounding Riders, and although it is Custom against weight reduction, it seems to increase the possibility of protecting the area around the Lever and Reserver tanks.
Also, the vibration absorption, which was the original concept, seems to have been effective, and I feel that numbness and fatigue in my hands have been reduced.
It is difficult to judge whether my physical strength has improved in this area.
Also, as long as the inner diameter of the handlebar is checked carefully, installation can proceed smoothly and without problems.
It is a very Simple product, but I think it is very effective.
View detail
Fits: HONDA glom, HONDA MONKEY125
Very good product!
I had been suffering from the vibration of the handlebar, which is peculiar to Groms, during city driving and touring, but this product has made me comfortable. It is a very good product. View detail
Fits: Others
I appreciate the ability to reuse it.
Used in CT125CT110 HUNTER CUB.
Purchased a Vibration Absorption Lever Guard to install on my CT110 HUNTER CUB, which was used on my 690 DUKE before the switch.
When I pulled out the long, thin washer attached to the Adapter, it entered the Handlebar.
It would be nice to be able to use another type of car in this way.
View detail
Look good, feel great!
Put these, with the hand protectors, on Tuono V4. They really suit the bike and make a huge difference to the vibes through the bar! Didn't use the expansion inserts, instead used a longer M6 bolt, an M6-M8 sleeve, and a spring washer so I could fit it directly to the existing Tuono bar insert and keep the bar end weight too View detail
Work well, look good
Work really well with the vibration absorbing lever guards. Looks great on a 2021 Tuono V4 1100 and has no problem clearing the Aprilia tall screen View detail
Lever Guard Bar End
I was fed up with the numbness and tightness of the STD Handlebar, so I replaced the Handlebar and decided to replace the Bar End because the inner diameter was different from the OEM. I bought it.
The inner diameter was slightly reduced and the outer circumference was reduced by 1mm or more.
I heard that the OEM Lever was a winner and I also purchased the Short lever.
Well, the key is vibration proofing, but I haven't tried Touring yet because of winter, but I ran about 60 weeks on the nearby Thousand Meter ShortCourse.
I want you to know that I want you to be able to do the same thing. (・∀・)
It is not Racer, enJOY, but is the vibration of the hand about normal NAKED?
It was no problem at all.
I'm looking forward to spring, which I think will make cruising at high speeds easier.
View detail
Fits: HONDA glom, HONDA MONKEY125
It works!
The Handlebar Guard I had been using is no longer available due to the replacement of the lever, so I installed this.
We had previously installed Posh's Heavy Weight Bar End and AELLA's anti-vibration ring.
I felt that both of them were definitely effective, but due to the increase in width of the car, I took it back and replaced it with this one.
Honestly, I thought it would be … effective, but it's no better than the above two! (= personal opinion)
This product is doubly great because it narrows the width of the car and adds Guard.
View detail
Fits: HONDA MONKEY125, HONDA GROM, HONDA GROM
Just like Rumor said, a very effective product!
On YouTube, I saw a guy who rides a Monkey 125 raving about it, so I bought it just to see what he had to say. I did a test run today, and was surprised to find that the vibration was much less than before!
? Lightweight Oil Filter→Cover removed after replacement
?CrankshaftAdapter
?Lightweight Fly Wheel
? Heavy Bar End
I tried to reduce the vibration of the single cylinder, but there was still some left, but with the OUTEX Vibration Absorption Lever Guard, it is almost gone! (I think it's especially bad when idling, but it's completely gone. (It's a miracle for a single cylinder)
Installation is super easy, just follow the instruction manual!
View detail
This Size was perfect for my crf125F!
Item number:VALG-S-18
I put it on just in case because I don't have the OEM Clutch lever in stock, and because the Clutch lever is long, you have to move the Clamp of the Clutch lever to the HandlebarCenter or it will interfere.
View detail
No more vibration during normal driving.
I installed it on CBR1000RR-R SP.
Because of the vibration caused by the new Handlebar.
I bought the wrong inner diameter of the Handlebar when I ordered it, so I ordered an extra hex to change it and installed it, and the result is no vibration and I think I bought a great product.
View detail
Vibration Absorption Lever Guard and Quantity:Recommendations in Set
I had a Vibration Absorption Lever Guard installed on the glom.
It's cold in the winter time, so I thought I'd wear my Knuckle guard too, and I found a Bracket that might come in handy!
Of course, OUTEX has Knuckle guard for Lever Guard and Exclusive Bracket, but you can use other company's one if you have Bolt hole on Knuckle guard side.
I installed a ZETA X2Protector.
I think the exclusive product for OUTEX is the Black color Knuckle guard, but it can be used by other companies, so it's convenient for customization to match your vehicle color!
The body color of the Grom is Loss white, so I installed White&Red Protector to match it.
(The image is blue due to the color of the LED light, but the actual color is the same as Grom's body color, a proper white color)
I was able to install the bolt with no problem using the bolt that originally came with the OUTEX L-shaped clamp.
It is a good product that combines convenience and customization.
View detail
Fits: Others
I'd love to have one of these!
I got a Vibration Absorption Lever Guard, but I had to replace the Handlebar, so I had to replace the M
I found this product when I couldn't install it with 6Screw and was wondering what to do about it, so I bought it.
I used this Adapter for the Handlebar on my 22.2 Hurricane Condor with an inner diameter of 18?
All you have to do is tighten it up and it's installed perfectly!
View detail
Fits: その他
If you have more than one Size, you can deal with each Handlebar!
I have a WR250X that I'm using as a road racer with the Lever Guard from OUTEX.
When I test several Handlebars, I can't install them if the inner diameter is different.
In such a case, if you have this Adapter, you can use the Lever Guard that you have.
View detail