Reviews
Good quality & Recommended OUTEX Honeycomb Catalyzer 33060-10IN38
I'm using honda hornet 250DX.This is a late verson of manufacture.Im looking for changing chrome silencer bend which is use in hornet early verson.but unfutunatly early verson crome silencer bend doesn't include with catalizer.Finally i found this in webike and this will perfectly fitted in to the middle of silencer which is rich to exhaust temperture +300C above. Qulity of outex catalize is very solid and serial number and brcode will print on outside of wall. After using catalizer, earlier engine thin sound(without catalizer with silencer bend) will desapire and smell of gasoline will reduce. Even reduce air polution too. This Ctalizer i will recomnder for motocycle enthusist View detail
Purchased for the purpose of reducing volume
[How is it used?
GPR's DECAT, an external Exhaust System When I installed the PIPE, the volume was too loud and bothersome, so I had to remove it. However, it was a waste not to use it, and because it did not contain a catalyst, I purchased it as an environmental measure and to reduce the volume.
Was the one you received as per Image?
I received a Straight Pipe product identical to the description and photo.
Was the installation difficult?
In my case, the exhaust pipe OD & phi;35, ID & phi;33 was just the right size to fit inside the pipe, but there was a bend in the bore diameter on the exhaust pipe side and a weld bead on the outside of the pipe on the product, so I had to use a plastic hammer to tap it in for insertion.
Instead, it is no longer necessary to drill a separate hole for screw fastening, etc., because it is no longer easy to pull out.
How was your experience with it?
As a result, the volume was just right, not too loud and not too quiet as OEMs.
Clean performance is unknown due to lack of measuring equipment.
As a reminder
In this case, it was an external exhaust system, so we have not checked whether it will be attached to the OEM or not.
Even if it is installed, it is not expected to be compliant with vehicle inspections, etc.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
I was slightly concerned about the weld Bead, but I had no problems as a result.
In some cases, it may become an obstruction and may need to be scraped off.
View detail
Let's mute it.
I used it for sound deadening purposes on my vfr750r Lady Bird 4in2in1. The length is 3cm longer and needs to be Cut. The thickness is 45 pi, which is just right. The catalytic converter part is 38 pie, so I used stainless wool to prevent it from rattling. The effect of the sound deadening is good because it became a little quieter. I don't have a machine to measure the sound level, so I am just guessing, but it might be just 99db. The smell of the exhaust gas seems to have been reduced by about half, so I think the purification performance is quite good. View detail
It doesn't smell bad.
I changed from Authentication Exhaust of JMCA to a non-approved exhaust system and installed a cheap catalytic converter from Amazon because the exhaust gas smelled bad. The catalytic converter was replaced with a proper catalytic converter. View detail
Fear Prevention
I bought it because it has Rubber on the Spring and I thought it would help prevent chatter.
It was effective in suppressing the chattering sound.
View detail
emotion
Exhaust System is 60.5 pi Asahina Tube Full Exhaust System.
Exhaust gas smells bad because of catalyst-less straight pipe. Naturally, it is not popular among fellow touring drivers. When I drive in front of them It stinks! It stings my eyes!" And.
I use it for my daily commute, but even after 15 minutes, my clothes, hair, and bag are covered with the smell of gas.
The Level was understandable within a radius of 2Meter.
By adding this catalyst, 、、、、 the smell is really reduced!
I feel 95% less! I'm not lying!
Since the catalyst itself is effective only after it is heated, it smells immediately after startup.
But after two minutes of driving, you'll be amazed. The smell of gas is gone.
I was really impressed with 、、、、 how comfortable it is not to smell the exhaust Gas.
It is not a Baffle and has almost no muffling effect.
Idling has only removed some of the cadence of the sound. (The volume remains the same.)
Power down is almost imperceptible.
However, it is definitely in resistance, so it should be falling numerically.
And yet it has a reliable deodorizing effect. It is wonderful.
I really, really recommend it to anyone who has a problem with exhaust Gas odor. It will make a drastic difference!
A little expensive, but considering the effect, it's a small price to pay!
View detail
Good. ♪
Stainless Steel, no resonance and cheap.
No complaints at all.
View detail
Stainless Steel Spring
I bought this because I installed a different silencer this time and the spring length doesn't match. I'm happy with the Large variant because it's cheap and good quality. View detail
It's a universal product, but it's a good one, and it's a great cosmetic!
I put Mr. Earls Gear's BurnCLASSICSingleS on the Z900RS and it was quite cool and the sound was crisp without saying it, but I changed it to Mr. OUTEX's barrel-shaped aluminum silencer for my taste and volume.
It's great! The volume is a little loud. (On a scale of 10, 5 for OEM, 6 for Earls Gear, and 7 for OUTEX) I am satisfied with the appearance of this product, and I am also satisfied with Large.
Best of all, it's cosmo! I'm very happy with it. But I installed it forcefully. It seems that the mounting Bracket should be changed. Although the spring hook of Silencer was not attached, when I instructed the installation position to Mr. OUTEX and sent it, I had it sent back quite soon. They were very kind.
The car won't pass inspection, but it will be easy to just replace the Silencer.
View detail
Easy to use
YOSHIMURA's exhaust system has deteriorated and the sound became large Replacement
The ban on going out of the house was lifted due to the New Model Corona virus infection is fun!
View detail
It is a wonderful performance.
We installed the LCIExhaust System on the Deer bell in 2016. Because it became a catalystless, I was concerned that exhaust gas Gas while driving was quite odorous.
After installation it became the smell of OEMExhaust System Level!
The volume does not change much and I feel it is somewhat VolumeDown! Power was feeling a little Mild! The installation is completed by Small machining.
View detail
OUTEXOUTEX Honeycomb Catalyzer
I exchanged for the SCP Project Full Exhaust System, but I was considering an Inner baffle where the Exhaust Volume was Large, I found this baht.
Since it was possible to change the Flange outline, Flange fixed position, it was possible to mount it perfectly in Size.
The Exhaust Volume in question, Idling - Although it does not change in the low revolution range, acceleration - A decrease in Exhaust Volume was obtained in the high revolution range.
I think that Power and Torque are not depressed..
Regarding price, I am satisfied because it is a special part and there is no additional fee for changing Size.
Although it is not an objective purification of the original exhaust gas Gas, it is possible to suppress Exhaust Volume and furthermore if exhaust gas Gas can also be purified, it is one stone two birds.
View detail