Reviews
Fits: Others
LargePowerful sound quality and sophisticated design
[How is it used?
I had installed MotoGEARJP & Phi;100 Titaniumium silencer on my YAMAHA/XJR400R, but I was looking for a thinner silencer with good sound quality. I had a friend who had a K2tec Stainless Steel Silencer and I liked the design and sound, so I bought this Titaniumium type of Φ86.
Was the one you received as per Image?
As you can see in the Image, it is the best design. I thought it was too thin at first, but when I put it on, the power is as strong as MotoGEAR because of its length.:I was confused between "1 Set of 2pcs." and "Quantity:1 Set of 3pcs. is very good to increase the Sports feel.
Was the installation difficult?
I personally have removed the Exhaust pipe and Silencer many times and had no problem at all.
The only thing I have to say is that since I changed from Φ100, I did not have enough Offset for the Bracket, so I measured the color and Bolt for that and bought additional ones.
How was your experience with it?
The sound quality was quite good as well as the Design.
The thinner the sound is, the thicker the sound becomes, and I feel that the sound quality has become like that of a Large Motorcycle.
Is the volume itself not so LARGE because of its length?
In any case, we were quite satisfied with the results.
[Included Parts:were they on?
None in particular
[Was there anything that disappointed you?
So far there are none, but I don't think the car will pass inspection.
View detail
Buy for Circuit Running
The construction is solid and the product is good. The inside is also well filled with sound deadening material. The cost performance is quite good. The weight is not too heavy for a stainless steel, and the Silencer plug is 60.5 to 60, which allows the exhaust to exit directly, so the sound is quite loud. It is very loud because of that. It is impossible to use it on public road. The attached baffle makes it quite small, but the level is too high to be inspected.
As for the sound, I purchased it with an understanding, so I had no problem.
(Not good)
The images of the products, including those on the manufacturer's website, are mixed up, making it difficult to tell the surface color of the product I am ordering.:It was Polishing.
View detail
Fits: Others
Used for FZ1FAZER
I think the overall construction is good. It is a 320 100pcs 60 Punching, I used it with Earls Gear's Titanium Kan Exhaust System, the Idling is not very stable when the inner silencer is taken out. I think it's just a matter of the setting of my car, but I think it's too much because it's a Japanese specification model. It just looks pretty good. View detail
Fits: Others
Mounted on D Tracker and NINJA2 Helmet50RR
[How is it used?
D Tracker
Running use:MOTARD (Circuit、Off-road)
Period of use:2 runs
NINJA2 Helmet50RR
Traveling:Touring, mountain passes
Period of use:About 2 months
Both are used with Baffle.
Was the one you received as per Image?
As per Image. The appearance is Material:Stainless steel, large, beautiful, and well built inner punching.
Was the installation difficult?
It was not difficult to work on both models, and there were no particular problems with the precision of the inserts.
It takes some time to adjust the position of the silencer band.
Therefore, it is necessary to work calmly and with plenty of time.
If you keep the above in mind, you will never fail.
How was your experience with it?
D Tracker
Air intake including carburetor, external air cleaner, external front pipe. (For RSV's KLX250SR) Mid pipe, external (For XR250 of FMF) When used in vehicles equipped with the exhaust and Watani Coils, the
The engine has a good release and turns smoothly up to the high RPM range.
This makes it difficult to use because of the lack of torque in the low and mid RPM range.
It looks like a large one.
When I use the Race, I'm afraid I'll be dropped for over volume at the vehicle inspection.
NINJA2 Helmet50RR
For vehicles with TSUKIGI exhaust pipe and external air cleaner
The engine has a good release and turns smoothly up to the high RPM range.
This makes it difficult to use because of the lack of torque in the low and mid RPM range.
Even with the Baffle installed, the volume is so loud that it takes a lot of care to start the engine and makes you tired when touring. Still, it is quieter than TSUKIGI's Short Silencer.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
It was a good speaker, but the volume was too loud.
I would have preferred it to be a little quieter.
[ITEMS TO BUY TOGETHER
Silencer band in Φ100
Liquid Gasket (Bus Coke is also acceptable)
View detail
Fits: Others
Great sound quality and volume!
GSX1300R HAYABUSA 10 year old North American Spec.
Silencer on Earls Gear Wyvern's Full Exhaust System Used in exchange
Japanese Vehicle Inspection Correspondence Compared to WYVERN Exhaust, both the volume and sound quality change to another dimension
I am very satisfied
Because the silencer part is thick and short, it produces a very thick and good sound The sound is good even at low speed, and at high speed rotation, a high-pitched sound mixes with it to produce even better sound and through-blowing You can feel it physically
Because it is a GP type, you can feel the torque firmly from low speed, and it is very fine on the mountain roads On the road to Kunekune, the GSX1300R HAYABUSA doesn't feel sluggish at all, even in 3rd gear It's easy to run
Cost is satisfactory, appearance is excellent, and the titanium color is very beautiful and conspicuous Quantity:It is 1 Set of 3pcs I'm impressed
I can recommend this product quite a bit
However, of course, the vehicle will not pass inspection, so when the vehicle is inspected, it will be returned to the Wyvern silencer (laughs)
View detail
Great value for the price,
I bought the 420x89 with 60mm baffle model. Great sound and looks for the price. Looks to be well constructed. Its on the loud side but without droning sound if you dont use baffle restrictor. I put it on 2016 ZZR1400 .Fast shipping to US. View detail
Fits: Others
The best
The sound quality improves gradually if you try it!
Power comes out!
It looks nice and the Exhaust System burns and gives good sound quality!
I think that it was good to attach!
By the time I bought it, I was worried but it was a correct answer.
View detail
Fits: Others
Satisfied
The appearance is satisfactory though.
I wonder if the sound is not good ~
K2TEC from one bang
I wonder if the sound quality is light ~
I only pray that it will sound good if I get burnt.
View detail
Fits: Others
Good Design
It was a product as I thought. There is no problem with installation and texture is perfect.
Cospa is satisfied well also in terms of price.
Image when I installed it on the car body just like I was satisfied without problems.
View detail
Fits: Others
Style and lightness are perfect.
I bought it for Fitting to YOSHIMURAExhaust pipe.
Style is a powerful Long Silencer and the burning color of Titanium is also beautiful and satisfied. I ordered the position of Spring's Hook from vertical to horizontal. I was able to do this free of charge. Also, the Emblem's Plate seems to be Rivet usually, but ordered without Emblem. Emblem was not attached although it was said that compensation is impossible.
Sound is pretty annoying if there is no Baffle.
Idling is stabilized if you are missing it, but if you attach Baffle, Idling becomes unstable if you remove Baffle. Air Screw adjustment is necessary, but I am having fun with Baffle attached.
If you would like to have fun without Baffle, you may be right just choosing Smaller Size for inner diameter.
View detail
Fits: Others
Almost satisfied
In the same Manufacturer, I chose the longest. The reason for choosing the longest is quiet and reason is that it is not too noisy. Naturally Baffle is used as it is removed, the impression is Punching inner diameter 50 and the total length is 620 so moderate volume (Individual differences) is. I do not like After Fire altogether. By the way Baffle is too quiet and not enough.
(The vehicle inspection is going through, is not it?) The reason why I made it to star 4 is that the Rivet division is somewhat collapsed. It will be useless, though.
View detail