Reviews
Recommendation for those who want Rear under cowl on GSX-8S,8R
Although it is an overseas product, the precision and quality are high, as if it were a manufacturer of for-race parts.
The GSX-8S and 8R have only a thin rubber plate as a partition between the tire and the rear suspension, so if you are concerned about splashing mud on rainy days or dirt on the rear suspension, this is a recommendation.
The shape is also cool, with an accent near the center, and the Matte Black color gives a sense of uniformity, as if it had originally come from the OEM.
View detail
Fearless.
I am glad that I installed the new system, because it looks more stylish and I don't feel the driving wind when cruising at high speeds.
If you bend over a little, it's very nice!
View detail
Genuine Puig Chain Tensioners (Adjusters) for BMW S1000RR 2017
I have not used the chain adjusters from Puig before but I have had a lot of use from other brands but decided to give these a chance. Finding the right ones for this specific bike was not tricky as I had already checked Puig website for the part number. Luckily, Webike did stock them for this bike so all was good. As I said before, I have had a lot of use from other brands like Lightech with great results but wanted to see for myself if these Puig ones are up to par with those. The price was a lot cheaper than the Lightech branded ones and this was also a plus point. With some other parts, I had them all shipped together via EMS and the order arrived in 5 days from being shipped. On arrival these were really well packaged even though they came in the Puig box. They are really well made and the anodising is flawless in the red colour I opted for. They are very well put together and the threaded section is super smooth. I do have to say, they look a lot like the other brands as the design is almost the same. I suppose there are only a few ways of manufacturing this kind of part anyway. Fitting is very straight forward and even a novice can fit them without issue. So the final result was excellent and I am very pleased with the Puig brand for this use. Will no doubt try them again on other bikes too. Thanks Webike View detail
Item well packed!
Webike is one stop accessories shop for Motorcycle product. Especially the Magical Racing carbon! Ordered a Puig windshield for Gen 3 busa. Very fast shipment and product is authentic. View detail
Fits: HONDA CBR1000RR-R FIREBLADE, HONDA CBR1000RR-R FIREBLADE SP
If you remove the Mount, you can put it on,
All Winglets were removed for Cowl repair.
However, when the repair was completed and the winglets were installed, the rubber mount could not be positioned. A friend of mine who bought the same thing told me
The positioning jig for installation was borrowed and copied.
This product, like Honda's SeatBack, is also made from a pattern.
I think there are things to install.
For reference, see the photo.
View detail
Good
I had a Puch Screen on a 2008 SB I used to own. I remember that I had a Large change difficulty installing it back then, but I guess the accuracy has improved, and it went on easily on the 2018 model this time.
I chose Dark smoke and am satisfied with the way it looks.
View detail
Ideal for touring on forest roads!
[How is it used?
Ideal for touring on forest roads!
Was the one you received as per Image?
I was looking for something else, but I really liked it in my own way.
Was the installation difficult?
The installation method is also easy to understand and can be checked with a QR code.
How was your experience with it?
? Right now, it's a cold climate and installation is only a little while away!
[Included Parts:were they on?
?Included Parts:none.
[Was there anything that disappointed you?
The ?rubber is good, neither thin nor thick!
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
? I think it would be easier to install if there was a thin base paste Seatetc. so that the mounting position could be easily seen.
No photos are available because it has not been installed yet.
View detail
Fits: APRILIA DORSODURO 900, APRILIA RS 125 GP REPLICA, APRILIA RS125, APRILIA RSV4, APRILIA RSV4 FACTORY, APRILIA RSV4 RF, APRILIA RSV4 RR, APRILIA SHIVER 750, APRILIA TUONO 125, APRILIA TUONO V4 1100 FACTORY, APRILIA TUONO V4 1100 RR, APRILIA TUONO V4R, BENELLI LEONCINO 800, BENELLI LEONCINO 800 TRAIL, DUCATI 1098, DUCATI 1198, DUCATI 1198S, DUCATI 1199 SUPERLEGGERA, DUCATI 749R, DUCATI 749S
Genuine Puig Hi-Tech Racing Grips
These grips were purchased for a customer who wanted a little more bling on their bike. The copper colour was the one they wanted. Searching Webike and found these fairly easily and at a better cost than I could source locally. With a few other small parts already in my basket, I got all shipped with my chosen courier which is of course EMS. They just get the orders delivered fast and I mean fast. Thsi all arrived in 5 days from being shipped which you cannot argue about. The grips themselves came in the standard Puig packet/box and were also covered in bubble wrap to keep them safe. The colour is more true to a copper than I would say orange but as it happened, this worked perfectly with the colour scheme of the bike anyway, win win. I personally have never tried this style of grips but once fitted, they do feel alright. I have to say though, the finish and quality of these are absolutely awesome. Really good CNC work on them and the grip part is super grippy so no issue with slippage. The customer is very pleased so thanks Webike, nice one. View detail
Genuine Puig Racing Screen for GSX1300R 2006
Personally, I have never tried them but as it goes they do seem a robust screen. Plus, a customer specifically requested this blue versionto match with their bike colour scheme. They are reasonably priced and the fitment is perfect with what I have read from reviews online for this screen to this model bike. Other items in my basket and this screen meant that the shipping was really good value because if you have a few smaller parts this cuts down on shipping individually. Some of the other parts were always going to be an issue in case they scratched the screen. Webike think of all this and pack your items accordingly. The screen was packed in a loveley thick bubble wrap and taped closed. The rest of the parts in my order were all padded and therefore, no damage could occur during transit. Webike even tape theentire box closed. EMS fast service is what I chose, the cost was so good and all my items were delviered in 5 days from being shipped. The screen arrived with me in perfect condition and I am not surprised by the amount of bubble wrap that was surrounding it. The screen has a bit of flex which of course you need during fitment and for the screen not to be buffetted too much by wind. This also helps when you have an aftermarket race front fairing and they very rarely are the exact same shape as the original so some movement is needed in a screen anyway. All the fixing holes are perfectly made, line up just fine. Not really much else to say about it, it's a blue screen with a gradiented smoked area at the bottom near the instrument cluster. There are no sharp edges and all appears to be without any distortion to it either, crystal clear if you like. All together, I am very pleased with how it looks and how it all went together. Not a tough job for anyone. So, thank you Webike for the great services. View detail
Fits: HONDA REBEL500(CMX 500), HONDA REBEL250(CMX 250), HONDA Rebel300
Genuine Puig New Generation NK Sport Screen for Rebel 300
This was a purchase a customer asked me to source for them to add to their Rebel 300 which they wanted a different screen than the one they already had fitted. This one is more of a retro look and gived the bike a better stance on the road. The custoemr had already sourced the correct part number for their bik so I did not need to do any research. Great stuff. The cost of this screen was a bit better than I could source locally, besides I already had a few parts in my basket that needed placing. I got them all shipped with EMS and the delivery took like 5 days from initial shipping from Webike warehouse. I have to say again, Webike warehouse really know how to pack items correctly and with the amount of packing involved, there is no way this screen or any of the other parts were going to get to me other than in 100% perfect condition. Well done Webike warehouse. So, this screen also comes with all the accessories needed to fit to this model of bike. No need to have to find a kit to do this as it comes in the box. The screen itself is gorgeous dark smoke and the clarity of the screen is perfect. It was a breeze to fit as everything fitted precisely as it should. This bike now looks a million dollars. One very happy customer. Thanks a lot Webike. View detail
I think it's a must for Fender Eliminator.
Fender Eliminator and installed because I was concerned about water rolling up from the road surface.
I think the dirt on the back side of the License Plate is better after driving on wet road surfaces.
(I can't look at this quantitatively, it's a personal feeling.)
I feel that the sand, etc. that rolls up to the lower LINK of the Rear suspension in front of the Swing Arm has also become much better. (This is also my personal opinion)
When the OEMFender was not removed, it was difficult to clean, degrease, and drill the holes mentioned below, so I removed the OEMFender.
This is an area that is difficult to check, so be careful. (I will buy OEM Parts from webike again)
Also, when installing, it is necessary to drill holes in the OEMFender, so an electric drill is required, even if it is a cheap one.
The included Double-sided Tape was packed and applied, but since it is a Rivet stop from the above hole drilling, perhaps just a few light layers of tape would have been sufficient.
Also, at first, I was reluctant to drill holes in OEM products, but when I checked the price, it was surprisingly cheap at around 2,000 units, so I did the work without worrying about it (laugh).
For your information.
View detail
Perfect windscreen
I was trying to decide on a windscreen for a couple weeks. I chose this Puig and am so glad I did! Not too small, not too big. 40°F at 45mph, I was very comfortable. I could not be happier with the look, fit, functionality. No turbulence around helmet or rattle / vibrations. 10/10 View detail
Touring Essential Items
I thought I knew what Screen could do, but once I installed and experienced it, there was no going back.
Without the screen, the 100 km/h acceleration on the freeway was an ordeal of constant struggle against the wind pressure on my body,
When the Screen is installed, the wind pressure on the body is much lessened even when accelerating at 100 km/h, of course, or even when overtaking.
The effect is immensely Large, even though it looks like a small difference!
In my personal opinion, I chose Puig's Screen out of the many available because I liked it the best.
Installation can only be done once after the Screen has been loosened, but it uses only common tools and does not require high maintenance skills.
I think the price is a little high, but I think it is cost effective.
View detail
Installed on MY2021 StreetTripleRS
After wearing this, the wind has less effect on my upper body below the helmet, and I feel less tired even when driving at high speeds.
It looks a little silly, but it's functionality is important, so it's a TradeOff.
The only drawback is that the mounting points are bolted together with other plastic parts and the quantities are the same as other plastic parts.:Pair (for Left and Right) Since each part is supported in one place, the resin parts move together with the Screen base when there are bumps in the road, such as uneven surfaces. "Clatter." The sound is heard when the unit is installed. We are planning to stop the sound soon because it is an unavoidable part of the structure, but over 20,000 yen....
View detail
Rear Fender is good to have
After riding on a wet road, the hem of my Pants got dirty, so I put on the Rear Fender. It was easy to install, but when I loosened the ParaLever Bolt (Torque T50), I was worried that I might lick the Torque due to the tightening mechanism (the feeling in my hand was like I was going to lick it). (The feel of the bolt in my hand was like I was going to lick it.)
The bracket is solid for its cantilevered design, but the gap between the bracket and the fender can cause interference and chattering noise, so we recommend using padding before installation to prevent chattering.
As a result, the dirt countermeasure is effective.
View detail
Fits: MOTOGUZZI V7 850 SPECIAL, MOTOGUZZI V7 STONE 850
Expect mud splash reduction!
Not satisfied with one, he purchased two and connected them together in an adventure.
Maintenance was said to be difficult, so it was painted and installed.
The effect is unknown as it has not been driven yet.
View detail
Genuine Puig Touring Screen Clear for XT1200Z SUPER TENERE 2016
They are reasonably priced and the fitment is perfect with what I have read from reviews online for this screen to this model bike. Other items in my basket and this screen meant that the shipping was really good value because if you have a few smaller parts this cuts down on shipping individually. Some of the other parts were always going to be an issue in case they scratched the screen. Webike think of all this and pack your items accordingly. The screen was packed in a loveley thick bubble wrap and taped closed. The rest of the parts in my order were all padded and therefore, no damage could occur during transit. Webike even tape theentire box closed. EMS fast service is what I chose, the cost was so good and all my items were delviered in 5 days.The screen arrived with me in perfect condition and I am not surprised by the amount of bubble wrap that was surrounding it. The screen has a bit of flex which of course you need. This also helps when you have an aftermarket race front fairing and they very rarely are the exact same shape as the original so some movement is needed in a screen anyway. All the fixing holes are perfectly made, line up just fine. Not really much else to say about it, it's a clear screen. There are no sharp edges and all appears to be without any distortion to it either, crystal clear if you like. All together, I am very pleased with how it looks and how it all went together. Not a tough job for anyone. So, thank you Webike for the great services. View detail
Genuine Puig Dark Smoke Screen
A few customers have had these brand of screens. Personally, I have never tried them but as it goes they do seem a robust screen. Plus, a customer specifically requested this dark smoke version. They are reasonably priced and the fitment is perfect with what I have read from reviews online for this screen to this model bike. Other items in my basket and this screen meant that the shipping was really good value because if you have a few smaller parts this cuts down on shipping individually. Some of the other parts were always going to be an issue in case they scratched the screen. Webike think of all this and pack your items accordingly. The screen was packed in a loveley thick bubble wrap and taped closed. The rest of the parts in my order were all padded and therefore, no damage could occur during transit. Webike even tape the entire box closed. EMS fast service is what I chose, the cost was so good and all my items were delviered in 5 days.The screen arrived with me in perfect condition and I am not surprised by the amount of bubble wrap that was surrounding it. The screen has a bit of flex which of course you need. This also helps when you have an aftermarket front fairing and they very rarely are the exact same shape as the original so some movement is needed in a screen anyway. All the fixing holes are perfectly made, line up just fine. Not really much else to say about it, it's a dark smoke screen. There are no sharp edges and all appears to be without any distortion to it either, crystal clear if you like. All together, I am very pleased with how it looks and how it all went together. Not a tough job for anyone. So, thank you Webike for the great services. View detail
Fits: BMW S1000 R, BMW S1000 RR, HONDA CB1000R, HONDA CBR600RR, HONDA CBR1000RR FIRE BLADE, HONDA CBR1000RR FIREBLADE, HONDA CBR1000RR FIREBLADE SP, HONDA CBR1000RR FIREBLADE SP2, HONDA CBR1000RR FIREBLADE, HONDA CBR1000RR FIREBLADE SP, KAWASAKI NINJA H2 SX, KAWASAKI NINJA 1000SX, KAWASAKI VERSYS 1000, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z1000, KAWASAKI Z1000SX, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX636
One point fashionable
It looks so much better.
Very nice for a little accent around the Handlebar.
View detail
Fits: KAWASAKI NINJA 1000 SX, KAWASAKI NINJA1000, KAWASAKI Z1000SX
Might be good.
I am 185 tall, so I felt a little small in the standard Screen.
Even at high speeds with temperatures of 13 degrees Celsius, it seemed to avoid the wind well and was easy to drive.
View detail