Reviews
I want to prevent stepping stones to Radiator.
The rear of the OEM Front Fender is cut short, so I feel that rainwater, mud, and flying rocks will hit the Radiator directly.
I have a Radiator guard on the RadiatorBody, but I decided to install this Extend Fender just in case.
To install, remove the OEM Front Fender, clean and degrease the bonding area with the Extend Fender, and bond with the included double-sided tape. 。
We did not want to modify the OEM Front Fender, but drilled three holes with a drill to prevent it from falling off, and secured it with the included tapping screws.
We have not driven in the rain or on roads with puddles of water, so we cannot be sure, but we think the splash to the Radiator has been reduced.
Although there are some inexpensive copy products available on the Internet, we chose Puch for its peace of mind.
There are no color variations and it is a plus ticky product, so it could be priced a little lower.
View detail
Parenthesis is good
Parenthesis is good
We do not know the effect.
Circuit, for example, might be able to figure it out.
But it looks Parenthesis better.
The price is for two Plastic wings.
Well, various aerodynamic tests, development costs, etc.
The price will be the price of the product.
Once with KawasakiOEMSlider attached.
I was standing up, but I was safe.
It was expensive but satisfactory Parts.
View detail
Fits: HONDA CB1000R NEO SPORTS CAFE, HONDA CB1000R NEO SPORTS CAFE BLACK EDITION
Installation and Impression
◆Motivation to purchase
I am happy with the 2022 CB1000R Black Edition, but I have two concerns.
Wind pressure is too much.
Meter is hard to see.
The running wind pressure may be Level if you are used to riding a NAKED, but it is hard for me who has been riding a Cowl car for a long time. It is tiring to drive.
The Meter is almost a full LCD Unit, but it is difficult to see when light hits the display surface. The condition with the sun on its back is the worst, and the west sun is devastating. You can't see anything at all.
We knew that Screen was the one that would solve both problems, but until now there has been nothing for the Minor change type CB1000R. We also knew that it would not come with one for pre-MyChain.
I like the design and have no choice but to buy it.
Thanks Webike for handling it!
Installation
The conclusion is simple.
A hexagonal No. 3, 6, or 8 tool is all that is needed, but a hexagonal wrench will not work well with the handle. Ratchet wrench and an extension of about 10 cm are required. 27N-m and Quantity:A Torque wrench that can be set would be ideal.
The Instruction Manual is in Spanish and English version, but this is not a problem as the Illustration is easy to understand.
In the Instruction Manual, the first step is to remove the Mini Cowl from the Standard Equipment of the EUROPE Specification car, but of course my Japanese Specification car does not have one. I was nervous that I would have to use the Arm for this Mini Cowl, but I did not use it, so it was a large sturdy Arm.
I was surprised to find that the bolt on the Screen is No.6 while the Bolt on the CB1000R is No.8. I was worried that Puig might have misplaced the Bolt, but the screw diameter was the same, just the size of the large head of the Bolt was different.
The only thing to keep in mind is that the Screen must be installed with all the mounting bolts loosened, since the Arm is mounted at an angle to the side of the Motorcycle, and since the Arm is three-dimensionally bent, everything must be perfectly aligned to fit. However, this allows the Bolt to be tightened to keep the parts in place and prevent them from moving against each other, even though the Motorcycle is attached to the Arm in only two places.
Conversely, the angle of installation cannot be adjusted.
◆Impression
As for the driving wind pressure, it reduces it wonderfully. You can see it even at street speeds, and it is extremely effective Large at highway cruising speeds. I will never go back without the Screen.
Meter visibility was also effective. In situations where the sun is in the front, visibility is clearly increased. Even when the sun is on the side, the light is blocked up to the direction indicator light located at the top. (I bought the Dark smoke, but if you are more concerned about light blockage, you could choose the Black.)
However, it had no effect on the light from behind. This is because the Screen is angled to reduce wind pressure, and the distance between the Meter unit and the Screen is too large for the Meter unit.
However, I am satisfied with the Large size because the points I was concerned about could be improved in the Large size and I like the design.
Thanks Puig!
View detail
Genuine Puig Screen for Kawasaki Ninja 250R
This was a screen for a Kawasaki Ninja 250R as they wanted adark screen for touring. The look of the screen was exactly what they were looking for. They are reasonably priced and the fitment is perfect with what we read from reviews for his model bike. Other items in my basket and this screen meant that the shipping was really good value because if you have a few smaller parts this cuts down on shipping individually. Some of the other parts were always going to be an issue in case they scratched the screen. Webike think of all this and pack your items accordingly. The screen was packed in a loveley thick bubble wrap and taped closed. The rest of the parts in my order were all padded and therefore, no damage could occur during transit. Webike even tape theentire box closed. EMS fast service is what I chose, the cost was so good and all my items were delviered in 5 days.The screen arrived with me in perfect condition and I am not surprised by the amount of bubble wrap that was surrounding it. The screen has a bit of flex which of course you need. This also helps when you have an aftermarket touring front fairing and they very rarely are the exact same shape as the original so some movement is needed in a screen anyway. All the fixing holes are perfectly made, line up just fine. Not really much else to say about it, it's dark smoked colour is a superb screen. There are no sharp edges and all appears to be without any distortion to it either, crystal clear if you like. All together, I am very pleased with how it looks and how it all went together. Not a tough job for anyone. So, thank you Webike for the great services. View detail
Fits: HONDA CBR1000RR-R FIREBLADE, HONDA CBR1000RR-R FIREBLADE SP
Vehicle inspection?
The YAMAHA Super JOGZr Wing Blacklet fits within the width of the Handlebar, so it passed inspection as part of the Cowl. It does not fall under the category of protrusions,
For your reference
View detail
Fits: HONDA CBR1000RR-R FIREBLADE, HONDA CBR1000RR-R FIREBLADE SP
Well thought out and built
The instruction manual is in English version, so it is written like a plastic model.
I installed the Bolt in the correct order, but the Gold Bracket was difficult to install, so I tried several different Bolt installation orders.
Finally attached, YAMAHA Super JOGZr Wing Blacklet on Middle cowl.
It may hit. In that case, YAMAHA Super JOGZr Wing Blacklet by hand.
It could be adjusted by pulling.
This Motorcycle needs to be removed with the appropriate Parts Structure.
I feel that it is made with the idea of what will happen when it becomes a
The actual effect will be IMPRESSION by others.
View detail
Fits: YAMAHA FZ1 FAZER, YAMAHA FZ6, YAMAHA FZS1000 FAZER, YAMAHA MT-125, YAMAHA MT-07, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-10, YAMAHA MT-10 SP, YAMAHA TDM 850, YAMAHA TDM900, YAMAHA TZR50, YAMAHA T-MAX 500, YAMAHA T-MAX 530, YAMAHA T-MAX 530 DX, YAMAHA T-MAX 530 SX, YAMAHA T-MAX 560, YAMAHA T-MAX 560 SX, YAMAHA T-MAX 560 DX, YAMAHA T-MAX 560 TECH MAX
Mounted on a xsr700 '22
Fits xsr700 '22. Easy to work with. I was satisfied with the quality and design of the product. View detail
Anxious to install Sukima Large
The gap at the front most part of the body is much larger than NORMAL, and I felt uncomfortable when I looked at it from the side. The gap is roughly 3 fingers wide.
Also, the installation itself is still NORMAL and only 4 well nuts are used to support the screen, so there is a concern that the screen may fall off. Even if the gap is removed, I would like to see a product with clip nuts and rubber washers for installation.
View detail
Fits: DUCATI PANIGALE V4S 1100, DUCATI PANIGALE V4 1100, DUCATI PANIGALE V2
Genuine Puig Race Screen for Ducati Panigale V4 2018
A good friend of mine has just purchased a Ducati Panigale V4 and wanted something a little easier on the eyes as a race screen. The Puig brand has a great number of awesome reviews on everything from the fitment to the durability and looks. Easy choice to make really. Finding the part was pretty easy using the tools Webike provide. with a few other parts, this was all shipped with EMS and arrived in 5 days straight. The screen arrived in perfect condition as it came in it's own box really, No damage or problems at all. The screen is a lovely finish, all the edges were nice and smooth and the screen is blemish free and crystal clear. The mounting holes are super clean and line up perfectly. Not got a bad word to say about these screens, they work great and look the nuts. The screen really is a thing of beauty, the shape goes really well with the curves already on the bike. The workmanship is superb. Well done Puig! Fitted really easily and it all feels nice and sturdy. View detail
Genuine Puig Screen for Triumph Tiger Explorer 2014
A few customers have had these brand of screens. Personally, I had never tried them but as it goes they do seem a robust screen. Plus, a customer specifically requested this clear version. They are reasonably priced and the fitment is perfect with what I have read from reviews online for this screen to this model bike. Other items in my basket and this screen meant that the shipping was really good value because if you have a few smaller parts this cuts down on shipping individually. Some of the other parts were always going to be an issue in case they scratched the screen. Webike think of all this and pack your items accordingly. The screen was packed in a loveley thick bubble wrap and taped closed. The rest of the parts in my order were all padded and therefore, no damage could occur during transit. Webike even tape theentire box closed. EMS fast service is what I chose, the cost was so good and all my items were delivered in 5 days.The screen arrived with me in perfect condition and I am not surprised by the amount of bubble wrap that was surrounding it. The screen has a bit of flex which of course you need. This also helps as you do need to have some movement in a screen anyway. All the fixing holes are perfectly made, line up just fine. Not really much else to say about it, it's a clear screen. There are no sharp edges and all appears to be without any distortion to it either, crystal clear if you like. All together, I am very pleased with how it looks and how it all went together. Not a tough job for anyone. So, thank you Webike for the great services. View detail
Genuine Puig Touring Screen for Suzuki V-Strom 650 2019
This was a screen for a friends V-strom 650 as they needed a tall screen for touring. The look of the screen was exactly what they were looking for. They are reasonably priced and the fitment is perfect with what we read from reviews for his model bike. Other items in my basket and this screen meant that the shipping was really good value because if you have a few smaller parts this cuts down on shipping individually. Some of the other parts were always going to be an issue in case they scratched the screen. Webike think of all this and pack your items accordingly. The screen was packed in a loveley thick bubble wrap and taped closed. The rest of the parts in my order were all padded and therefore, no damage could occur during transit. Webike even tape theentire box closed. EMS fast service is what I chose, the cost was so good and all my items were delviered in 5 days.The screen arrived with me in perfect condition and I am not surprised by the amount of bubble wrap that was surrounding it. The screen has a bit of flex which of course you need. This also helps when you have an aftermarket touring front fairing and they very rarely are the exact same shape as the original so some movement is needed in a screen anyway. All the fixing holes are perfectly made, line up just fine. Not really much else to say about it, it's dark smoked colour is a superb screen. There are no sharp edges and all appears to be without any distortion to it either, crystal clear if you like. All together, I am very pleased with how it looks and how it all went together. Not a tough job for anyone. So, thank you Webike for the great services. View detail
Refreshing appearance and no dirt on the suspension.
I purchased this product because I was concerned about dirt on the suspension for driving in the rain.
When installing the bracket, it is recommended that the fixed bracket be attached to the fender first because there are parts where it is difficult to tighten the screws if the installation is done in accordance with the order in the Instruction Manual.
Brake hose cannot be fixed in the same way as NORMAL.
A little ingenuity is required to fix it properly.
It looks tighter and better looking.
The sass stains are gone.
View detail
Satisfied with both appearance and quality
[How is it used?
Daily Use
Was the one you received as per Image?
It was exactly as pictured.
Was the installation difficult?
The handling Instruction Manual is well written, so there is no need to worry.
Some tools are required.
Due to the need to get tools into tight spaces.
The Edge of the Parts is standing up, so that no one will be injured when installing it.
The shape was well made and there was no trouble at all with the hole position.
How was your experience with it?
The main feature is to prevent mud from splashing on the rear tires.
As shown in the photo, the Fender is extended compared to the OEM.
Since soaking it, less Large kiku water has been popping out of the Fender.
Very effective.
I had hoped to also prevent Chain oil splattering, but this also met my expectations.
Clearly superior to OEMs.
[Included Parts:were they on?
A complete set of parts is provided for installation.
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
The quality of puig's parts is high, so there are no outliers so far.
View detail
Large active for warmth, protection and looks!
I ride at least 4 days a week throughout the year, so cold in the winter and rain and bugs in the spring through fall were problems.
After installation, I hardly feel the wind in my hands.
Workability was easy to install with the included Instruction Manual.
Exclusive design with no extra bracketet etc.
I have always thought that a Handlebar Guard would look good on a STREETFIGHTER-type product, so I am satisfied with the looks and Large.
I think the price is a little high.
View detail
Fits: YAMAHA YZF-R3, YAMAHA MT03, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA MT-03, YAMAHA MT-25
Practicality and Looks UP
The Fender Eliminator Kit was installed when I purchased it used.
When I rode in the rain, the dirt under the seat was so bad that I had to clean it off every time.
After installation, it is almost dirt-free.
Installation was also easy after reading the Instruction Manual.
I am also satisfied with the look and feel of the Rear wheel area.
I thought it was a little high.
View detail
A screen that is essential for high-speed tours
I didn't know it at low speed, but when the speed is above a certain level, the normal screen cannot cover the wind blowing on the head.
How much does it slightly blow at the end of the head when the touring screen is installed? feeling
The color is also lighter than the picture, so there is no difficulty in securing shea.
Since it is summer, it prevents bugs and other foreign substances from entering.
I feel that it is necessary when enjoying a high-speed tour.
Ali products are known to be broken and damaged at high speeds. Buy genuine if you can afford it ---------------------------------------------- ------------ I didn't know it at low speed, but if the speed is somewhat above, I can't cover the wind blowing on the head with a normal screen. When the touring screen is mounted, the head is slightly blowing at the end of the head? Feeling Color is also a lighter smoke type than a picture, so there is no difficulty in securing the city. In the summer, it definitely blocked the worms and other foreign objects coming in. I feel necessary when enjoying the high-speed tour. Ali products know that there are broken and damaged sare at high speeds. If you are quite a while, live genuine Powered by Google Translator
View detail
PUIG Racing Windshield for Ninja 1000 2015
A few customers have had these brand of screens. Personally, I have never tried them but as it goes they do seem a robust screen. Plus, a customer specifically requested this clear version. They are reasonably priced and the fitment is perfect with what I have read. Other items in my basket and this screen meant that the shipping was really good value because if you have a few smaller parts this cuts down on shipping individually. Some of the other parts were always going to be an issue in case they scratched the screen. Webike think of all this and pack your items accordingly. The screen was packed in a loveley thick bubble wrap and taped closed. The rest of the parts in my order were all padded and therefore, no damage could occur during transit. Webike even tape theentire box closed. EMS fast service is what I chose, the cost was so good and all my items were delviered in 5 days.The screen arrived with me in perfect condition and I am not surprised by the amount of bubble wrap that was surrounding it. The screen has a bit of flex which of course you need. This also helps when you have an aftermarket race front fairing and they very rarely are the exact same shape as the original so some movement is needed in a screen anyway. All the fixing holes are perfectly made, line up just fine. Not really much else to say about it, it's a clear screen. There are no sharp edges and all appears to be without any distortion to it either, crystal clear if you like. All together, I am very pleased with how it looks and how it all went together. Not a tough job for anyone. So, thank you Webike for the great services. View detail
Fits: YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA XSR900
You can hide Frame's somewhat worrisome Point.
The back side of the product was not included in the product photo, so I am attaching it.
I would have liked it even better if it had been truer without the lettering, but it is slightly raised.
The installation is done by turning the hexagon in the middle, and the diagonally cut Pipe at the end of the hexagon expands to fix it.
It may be better to retighten it occasionally.
View detail
No sense of discomfort as if it were attached from the beginning.
The design is comfortable and has a presence as if it had been attached from the beginning.
The design is very good!
However, if we could cover the Tire a little more, would it be excellent as a Fender?
View detail
Windproof performance is good
The lowest position is around the highest position of the OEM.
I felt dissatisfied with the OEM when driving at high speeds, but this one is comfortable and I can safely say that there is no wind.
The OEM's complaint is that the top edge distortion is Large, but this product is almost distortion-free.
However, even at the lowest position, the top edge is in the place where I want to see the road surface in my position, so it is not soberly disturbing.
It's a matter of getting used to it, but it's a modest hindrance.
No problem in Corner as it is out of line of sight.
Generally satisfied but difficult to judge if I can recommend.
Design depends on the person, but honestly, it is subtle.
View detail