Reviews
Refreshing appearance and no dirt on the suspension.
I purchased this product because I was concerned about dirt on the suspension for driving in the rain.
When installing the bracket, it is recommended that the fixed bracket be attached to the fender first because there are parts where it is difficult to tighten the screws if the installation is done in accordance with the order in the Instruction Manual.
Brake hose cannot be fixed in the same way as NORMAL.
A little ingenuity is required to fix it properly.
It looks tighter and better looking.
The sass stains are gone.
View detail
Fits: YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA XSR900
You can hide Frame's somewhat worrisome Point.
The back side of the product was not included in the product photo, so I am attaching it.
I would have liked it even better if it had been truer without the lettering, but it is slightly raised.
The installation is done by turning the hexagon in the middle, and the diagonally cut Pipe at the end of the hexagon expands to fix it.
It may be better to retighten it occasionally.
View detail
Tourer's classic Custom
In NORMAL, for some reason, the Full Cowl version is shorter Screen's XJ6Series than the HALF COWL version.
Hoping for windproofing and sun blocking. [Color] Touring screen by Smoke was installed.
The windproof effect is much better.
The meter is now easier to see, and rain and dirt hardly stick to it.
[Color] Smoke is also not bothering me while driving.
However, there is some distortion in the Screen and Screw holes, which may be an individual difference.
If the 6 screws are not tightened gradually while balancing the distortion, the clearance with the position light will become quite unbalanced.
Also, I think it is a little expensive, although I guess it can't be helped that it is imported.
View detail
Fits: KAWASAKI NINJA 1000 SX, KAWASAKI NINJA1000, KAWASAKI Z1000SX
Really Black!
When purchasing a new car, the OEM's [Color] I was wearing Smoke, but I thought it should be a little darker. Black." I ordered the "Black" and it was really Black! (Lol)
It is not visible at all through the Screen. However, it does not interfere with driving and looks good, so it is good.
View detail
Fairly Clear
I bought it after seeing the picture and it was quite Clear. View detail
Fits: HONDA CBR1000RR-R FIREBLADE SP2, HONDA CBR1000RR-R FIREBLADE SP, HONDA CBR1000RR FIREBLADE
Puch Chain tensioner
Chain adjustment is easier than OEM. However, Memory is written but it is too small to see.
The element of dress-up components that emphasize appearance is stronger.
View detail
NORMAL and air currents are almost the same.
Wind pressure is no different from NORMAL with only a slight change in appearance.
It seems to be slightly taller than NORMAL.
Wind tunnel testing might make a subtle difference, but Large changes are not expected.
View detail
For now, we're going to use the appearance change Main.
I chose this product because I wanted to add a little volume to the front mask of the Z900, which is relatively light in terms of volume around the tank.
I thought I was supposed to assemble RoseRose's product according to the picture of the instruction manual on the Webike product page, but when I opened the package, I found it all assembled and ready to be installed on the vehicle.
Installation is easy because all you have to do is remove the three standard bolts around the front mask, replace them with the bolts that come with the product, and then tighten them together with the front mask. However, the Spoiler itself is in the way, especially when installing it.
I had a bit of trouble, but still managed to install it in less than an hour.
I was prepared for the possibility of poor fitting without some modification because it is an overseas product. I was prepared for this, but my fears were quickly dispelled, and I was able to install it without any problems.
In fact, this Spoiler is said to start generating effect from 80Km/h and generate about 2kg/f DownForce at 200Km/h, but I probably won't be able to test it with my riding style.
Do you see any difference in highway driving? I'm hoping a little.
View detail
Fits: KAWASAKI NINJA H2 SX, KAWASAKI ZX-10R, KAWASAKI ZX-10RR
Note the double-sided tape.
Basically, we don't run in the rain, but we installed it to control dirt from unexpected rain and spring water on the slope.
The Full Cowl is hidden in the body of the car, so it is hardly visible even if it is installed.
In the bare state, the area around the Radiator and Stem is contaminated with water, but after installation, most of the water stops around the bottom of the Radiator.
The mounting is double-sided and resin Rivet, but the thickness of both sides is not taken into account, so it will not fit deep enough if it is attached to the side part.
I was worried about using only two sides on a motorcycle that goes 300 km, so I also used Rivet.
View detail
Fits: KAWASAKI GTR1400, KAWASAKI NINJA 250R, KAWASAKI NINJA 300, KAWASAKI NINJA H2 SX, KAWASAKI VERSYS X-300, KAWASAKI Z300, KAWASAKI ZX-6R 636, KAWASAKI ZX-6R 636, KAWASAKI ZX-10R, KAWASAKI ZX-10RR, KAWASAKI ZZR1200, KAWASAKI ZZR1400
Do I need a Screw lock?
Installation is not particularly difficult, Material:I have been using it after cleaning the bolt, but I recommend that you buy a commercially available bolt and replace it when it becomes doubtful. I have been cleaning the bolt and using it, but considering the durability when I repeatedly loosen and tighten the bolt every time I change the oil, I recommend purchasing a commercially available bolt and replacing it when it starts to look suspicious. The color, processing, and finish are very beautiful and I like them. View detail
Mugen VFR800X Long Screen
It would be nice if the delivery time could be a little faster.
The quality of the product itself is good.
The wind regulating effect is better than OEMScreen.
View detail
Not too Black and not too thin
This is my first time using a pouch and I am very happy with the shape, color, and cosmetics. I recommend it. This is just my personal opinion. (Lol) View detail
Safe parking for Camping area and hot Asphalt.
I was concerned about the small side stand with a small ground surface, so I purchased this product, which is compatible with the TORACER.
The design is good and anyone with a Hexagonal Wrench can put it on.
When I temporarily aligned the upper plate, it floated a little, so I was a little concerned, but after tightening the bolt, I was able to attach it without any problem. Just to be sure, I tightened the bolt after applying screw lock agent.
It is safe even if you forget the STANDPad during camping touring, and it eliminates the fear of tipping over when parking on the hot Asphalt in the summer.
I guess it is a little expensive for a car model-specific product of Puch, but I gave it 3 stars for cosmetics.
View detail
Contributes to stabilization of Long Screen
When we introduced the company's Long Screen, we could not deny that the longer screen was unstable. After installing this product, it became stable. It is not conspicuous when viewed from the side, and it is calm and solidly supports the screen in an OEM-like manner. This product itself is quite heavy, and when moving the screen, the dial becomes hard, so a little hang is required. The price is a little high, and it would be better if the price were a little lower. View detail
Fits: MOTOGUZZI V7 850 SPECIAL, MOTOGUZZI V7 STONE 850
I want to reduce mud splatter.
I didn't want to get the Dynamo cover on my Dynamo cover even if it passed a little bit of moisture, so when I discovered this product... Yes!" I thought
The installation is specified to use both double-sided tape and Rivet, but I don't like Rivet that requires drilling holes, so I stuck the supplied double-sided tape all over the joint and am looking at how it is doing. It is still running about 1000 km and most of the driving is high pace winding driving, but so far it is completely Large and strong. I am concerned about the adhesive strength of the tape under high temperatures in the summer, so I will be careful in the future and keep an eye on it.
My personal ideal is to wear it for function rather than appearance, so I wish it were a little longer (3~5?).
these days I wonder what the turnaround time is." I was glad that it was sooner than I had been notified.
View detail
Hole Cap for CB1000R(2022)
Too much expensive, i would rather make same thing used by 3D printer... haha akward View detail
I thought the Radiator guard area was kind of lonely.
I didn't like the feeling of the Handlebar or lightening or floating at high speeds, so I ordered this to see if it would help stabilize it.
The Meter visor is also made by the same company, so the pouch was my favorite manufacturer;
First of all, the bag had a thick cushioning material, but perhaps due to vibration during transportation, the bracket for fixing the blinker to the bag was torn off and popped out, and the exterior parts were wound or even carved into the bag.
I immediately reported this to WEBIKE, who negotiated with the distributor and successfully replaced it with a good one. However, I was a little puzzled by the quality of the product, as the left side bracket was badly distorted and the screw holes did not fit unless the bracket was installed very forcibly.
In addition, the shape of the Wing to be placed inside in the instruction manual is Quantity:Pair (for Left and Right) I was quite troubled by the fact that it was listed in reverse, but the spacing of the Screw holes is Quantity:Pair (for Left and Right) The two are different, so they can only be installed in a way that allows them to be attached.
It looks like there is a wound on the inner wing, but there is a protective film attached, and the wound is only on this film, so it is polished when removed. However, this film is really hard to remove and frustrating.
I could have just returned it if I didn't like it, but the design (shape) is very stylish, and I found it attractive enough to pretend that there were no scratches or that I had to bend the mounting bracket by hand while forcibly attaching the bracket. Can't be helped?
However, from a performance standpoint, the 2kg increase in DownForce? I think it is still a matter of whether you can come to terms with this price, which is more Style-oriented than performance-oriented, since you may not be able to feel it unless you are at very high speeds.
Other products such as Visor made by the company are of very good quality and may be limited to this product or this ROD.
I'm happy with the Design for myself, so I'm glad. I can't say that I am completely happy with it, but … let's just say it's because of the recent depreciation of the yen.
View detail
Silhouette is good.
This product is simpler and less assertive than the parts of other companies, and I think it is very good when you want to add height with easy-to-wear parts. It looks good even when it is face down. I have no complaints in particular. View detail
Exchange from OEM
It is windproof enough to be compared to OEMs.
The design is cool and it was the right decision to buy it.
The Bolt holes did not line up unless I pulled on them a little bit, so the quality depends on the individual unit.
View detail
Overall, I am satisfied.
It was installed on SVP401 2021 MODEL.
No other Manufacturer had anything we liked that was compatible with 2021MODEL, and Puig was the closest to Image.
As you can see in the image, the overhang is strong, but due to Motorcycle's unique form, I think it can't be helped if it is well protected.
Material has a good texture and does not feel cheap. Installation is basically Level, which anyone can do.
The fixed Bolt has two supports, but when a strong force is applied, it may be because it can release the force by bending more than three supports.
I am assuming on my own that this is the case.
I'm not a fan of Motorcycle with glaring Anodized etc., so it is not fashionable or good looking, but I like it that way too.
Perhaps because of these times, it took a long time from order placement to arrival, but we managed to wait without rolling over.
Only the purchaser can tell, but I was surprised when I opened the package, as the product packaging had a luxurious feel to it.
Personally, I am fully satisfied with the product as a whole in terms of functionality, appearance, and price.
View detail