Reviews
Fits: HONDA CBR1000RR-R FIREBLADE, HONDA CBR1000RR-R FIREBLADE SP
If you remove the Mount, you can put it on,
All Winglets were removed for Cowl repair.
However, when the repair was completed and the winglets were installed, the rubber mount could not be positioned. A friend of mine who bought the same thing told me
The positioning jig for installation was borrowed and copied.
This product, like Honda's SeatBack, is also made from a pattern.
I think there are things to install.
For reference, see the photo.
View detail
Regarding installation.
It is not Circuit use, so it is appearance oriented, but it has presence.
The only thing is that I have to use the screw holes in the Radiator carver for installation, but I can screw the Bracket in and use it as a bracket.
The Bracket is then screwed back on. When attaching a plastic cover on the surface, place a washer between the plastic cover and the surface to prevent cracking.
When I tried to work with it, the weight of the bracket caused one of them to come off. It took me about 30 minutes to get it to fit.
I don't have to worry about it. It's a foreign product, so it can't be helped. Also, since it is a screw hole of Radiator, it will be the first place to be hit when it falls over. In the worst case, the Radiator may be damaged.
It looks good, and I would buy it even if it were a little more expensive if it had the same features as the Frame Slider but closer in shape.
View detail
Fits: YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 TRACER, YAMAHA MT-09 TRACER GT
Don't be a GunDam generation.
Dear Racer riders.
Have you ever felt a sense of rich volume in the upper part of the Front, but a sense of loneliness in the lower part of the Front?
Of course, I think that being Refreshing without anything is a design with a sense of lightness, but I chose this one to give an extravagant feeling to the underbelly of Small students who have been riding only Full Cowl to a certain extent.
The smoothness of the installation of such cowls is half of the difference between good and bad quality, but this pooch was easy to install due to the good dimensional accuracy of both the body and the bracket.
Now, if we look at it from a distance, we can see that it has a very good extravagant feel.
I don't feel any actual aerodynamic effect at all, but the increased volume on the underside of the car somehow created a sense of visual stability.
Items is not inexpensive, but it is a must-try for those who want a different feel for their partner.
View detail
Good for dress-up purposes.
I think it is good for dress-up purposes, but the price is high.
When asked if DownForce's effectiveness is actually felt.
Almost no effect, just a subtle feeling of hearing from the low 200s.
Also, since it is fixed to the Radiator, if it gets stuck standing up, it will not be able to be used.
I think Radiator will be bailed out.
View detail
Fits: HONDA CBR1000RR-R FIREBLADE, HONDA CBR1000RR-R FIREBLADE SP
Vehicle inspection?
The YAMAHA Super JOGZr Wing Blacklet fits within the width of the Handlebar, so it passed inspection as part of the Cowl. It does not fall under the category of protrusions,
For your reference
View detail
Fits: HONDA CBR1000RR-R FIREBLADE, HONDA CBR1000RR-R FIREBLADE SP
Well thought out and built
The instruction manual is in English version, so it is written like a plastic model.
I installed the Bolt in the correct order, but the Gold Bracket was difficult to install, so I tried several different Bolt installation orders.
Finally attached, YAMAHA Super JOGZr Wing Blacklet on Middle cowl.
It may hit. In that case, YAMAHA Super JOGZr Wing Blacklet by hand.
It could be adjusted by pulling.
This Motorcycle needs to be removed with the appropriate Parts Structure.
I feel that it is made with the idea of what will happen when it becomes a
The actual effect will be IMPRESSION by others.
View detail
For now, we're going to use the appearance change Main.
I chose this product because I wanted to add a little volume to the front mask of the Z900, which is relatively light in terms of volume around the tank.
I thought I was supposed to assemble RoseRose's product according to the picture of the instruction manual on the Webike product page, but when I opened the package, I found it all assembled and ready to be installed on the vehicle.
Installation is easy because all you have to do is remove the three standard bolts around the front mask, replace them with the bolts that come with the product, and then tighten them together with the front mask. However, the Spoiler itself is in the way, especially when installing it.
I had a bit of trouble, but still managed to install it in less than an hour.
I was prepared for the possibility of poor fitting without some modification because it is an overseas product. I was prepared for this, but my fears were quickly dispelled, and I was able to install it without any problems.
In fact, this Spoiler is said to start generating effect from 80Km/h and generate about 2kg/f DownForce at 200Km/h, but I probably won't be able to test it with my riding style.
Do you see any difference in highway driving? I'm hoping a little.
View detail
I have a feeling of Mustache…
I bought another Puig product after writing a scattered impression of SIDEDownForceNAKEDSpoiler last time, saying that the quality was … poor even though the price was quite expensive.
This time it is MustacheWing.
And it was also quite expensive.
This time, however, there were no distortions in the wounds or brackets, and we were satisfied with the tight installation.
The FrontCamera of DAYTONA's DVR had to be relocated along with the installation, but by drilling a 6mm hole in the bracket of this MustacheWing, the FCamera can be installed in the center of the bracket and the front stand can be hung without any problem. The FCamera can now be installed in the center of the bracket, and the front stand can be hung without any problems.
As you can see at a glance in the 6th Graph, the DownForce is effective from 200 km/h or more, and I feel that this speed range in NAKED is a battle against the air to begin with. In the first place, it seems that this speed range in NAKED is not the time to talk about DownForce.
So, I don't think the aerodynamic effect will work on ordinary roads, but I recommend it for those who want to use it for its appearance and as a Camera Bracket for the Dora Recorder.
View detail
Puig spoiler cover MT09 - 2022
The front end of the Yamaha MT09 is pretty bad, so to overcome that weakness I bought a Puig windshield. It surprised me in a very beautiful way, making the front end very cool and combative. Ready to race. View detail
Puch SIDEDownForceSpoiler
In conclusion, it is absolutely impossible to install it properly.
If the pattern paper is Quantity:I also had trouble with only 1pc.
And the pattern paper is not Exactly to match the top?
The location will change by about 5 cm depending on whether you want to adjust it to the bottom or the front or the back
The procedure is different if you refer to the Webike Product Page video for installation
In the video, Plate is applied first, and after 24 hours, Rubber rubber is placed over it.
Product was sent already installed!
This is because the Plate is located behind the Rubber Rubber.
Rubber rubber like Toilet's SUPPON will rebound like Spring and interfere with installation.
I looked it up on the Net and found that those with strong final strength have weak initial strength.
We are a GarageHouse, so our cars and motorcycles are both heated and cooled in the house!
Compress and paste for 1 minute at room temperature above 28 degrees Celsius or
I tried and tried, but it was impossible.
Emon sold separately (amon) Ultra Strong Double-Sided Tape (for Bumper, Spoiler, etc.)
Buy Strong Fixing Type White 25mm×width 2m×length 1.14mm×thickness 1.14mm 3910 for outside of car and
I machined and installed it.
The product is quite straight and is to be mounted on a curved cowl.
It's not so much that it's attached as it is that it's forced to be attached with Strong Double-sided Tape!
The shape does not fit the side cowl of the ZX-10RR at all.
I'm inclined to say that it's a 2021ZX-10R/ZX-10RR exclusive part.
ZX-10RR looks straight but Cowl is quite curved
It doesn't fit at all, especially the Right Side is almost floating.
If this is what you're talking about installing, I'm pretty sure it applies to all other Manufacturer's Motorcycle's.
Whether it is YZF-R1M or CBR1000RR-R, it is possible to paste it!
At the moment, I've driven about 50km to try it out and it hasn't been removed.
It looks cool, so that's good.
View detail
I thought the Radiator guard area was kind of lonely.
I didn't like the feeling of the Handlebar or lightening or floating at high speeds, so I ordered this to see if it would help stabilize it.
The Meter visor is also made by the same company, so the pouch was my favorite manufacturer;
First of all, the bag had a thick cushioning material, but perhaps due to vibration during transportation, the bracket for fixing the blinker to the bag was torn off and popped out, and the exterior parts were wound or even carved into the bag.
I immediately reported this to WEBIKE, who negotiated with the distributor and successfully replaced it with a good one. However, I was a little puzzled by the quality of the product, as the left side bracket was badly distorted and the screw holes did not fit unless the bracket was installed very forcibly.
In addition, the shape of the Wing to be placed inside in the instruction manual is Quantity:Pair (for Left and Right) I was quite troubled by the fact that it was listed in reverse, but the spacing of the Screw holes is Quantity:Pair (for Left and Right) The two are different, so they can only be installed in a way that allows them to be attached.
It looks like there is a wound on the inner wing, but there is a protective film attached, and the wound is only on this film, so it is polished when removed. However, this film is really hard to remove and frustrating.
I could have just returned it if I didn't like it, but the design (shape) is very stylish, and I found it attractive enough to pretend that there were no scratches or that I had to bend the mounting bracket by hand while forcibly attaching the bracket. Can't be helped?
However, from a performance standpoint, the 2kg increase in DownForce? I think it is still a matter of whether you can come to terms with this price, which is more Style-oriented than performance-oriented, since you may not be able to feel it unless you are at very high speeds.
Other products such as Visor made by the company are of very good quality and may be limited to this product or this ROD.
I'm happy with the Design for myself, so I'm glad. I can't say that I am completely happy with it, but … let's just say it's because of the recent depreciation of the yen.
View detail
SIDEDownForceNAKEDSpoiler
Great product, makes the car very cool and beautiful everyone should use. Performance when in use gives the car a better acceleration and cooler feeling when traveling long distances. I tried to post pictures but couldn't. --------------------------------------------------- -------- The product is great, making the car very cool and beautiful people should use. Performance when used brings the feeling of the car to accelerate better and cooler when moving long distances. I tried to post photos but couldn't. Powered by Google Translator View detail
2021- mt09
I must confess, I didn't experience the effects after the installation.
Looks pretty powerful!
I am satisfied with the quality of the product.
View detail
It's not accurate.
I was attracted by the look of the product.
Frankly speaking, I wish I had not bought it.
It is not worth $27,000.
First of all, BALI is amazing.
My bad for being careless, but the Edge part. Hmm?" Is this BALI…?" So I traced it with my finger and it cut my finger.
In the meantime, the entire BALI removal is a must.
Also, it is a combination of Bracket of Gold genus and Spoiler of ABS resin, and it is hand-finished and processed by puig, and it is Quantity.:Pair (for Left and Right) The shape was different in
When I put it on for the time being, the Right Side hits the DummyDuct as hard as it can. When I cut the Handlebar by force, the Right Side was so hard that it was cutting into the Spoiler and made a cracking sound.
I had no choice but to cut off the area hit by the luther as much as I could, referring to the Left Side, which was not hit.
"If you shave off that much, you can't hit a rock…"
But this time, the Bracket itself of the genus Gold was hit.
There is room on the Left Side but not on the Right Side.
Is there something wrong with the way it is attached? I tried to adjust it by loosening the screw, but it only attaches where it should and it only shifts a few millimeters, so I was out of luck…
Could it be that the DummyDuct of the MT09 itself has become dislodged? I thought it might be a problem, but it wasn't. ….
To be honest, is this a defective product? I think, "I'm going to have to give up and be patient and use it," but since I've shaved it off.
View detail
It has a futuristic feel!
The MT09's futuristic-looking mask looks even tighter.
Combined with the Light part, it makes for a cool X-shaped forme!
It's not a performance enhancing part, so it's totally custom looking, but it's a great design that shows off Puch's sense of style.
If you're not sure whether to wear it or not, this is a part you won't regret. This is a part that you will not regret wearing.
View detail