Reviews
Installation could not be done
The two front holes were misaligned with the Bolt position on the Body side and could not be installed.
I asked Manufacturer to check and they said there was nothing wrong with the product itself.
I don't know why, but I decided to return it because I can't put it on.
Please be careful if you are buying the same type of car.
It is a shame because I liked both the transparency and the shape.
View detail
Anxious to install Sukima Large
The gap at the front most part of the body is much larger than NORMAL, and I felt uncomfortable when I looked at it from the side. The gap is roughly 3 fingers wide.
Also, the installation itself is still NORMAL and only 4 well nuts are used to support the screen, so there is a concern that the screen may fall off. Even if the gap is removed, I would like to see a product with clip nuts and rubber washers for installation.
View detail
Let's inspect it.
This item cannot be assembled as per the Instruction Manual, I have inquired about it, but no response after 20+ days. If you are unable to craft it yourself, please be careful.
A bad point
Screw is missing 1 pc.
Some Screws don't enter the Nut, perhaps because of the thick coathin? Once assembled through Dice.
Screw can't reach it, it needs 20mm, but I assembled it by my own way, 15mm hexagonal Spacer for some reason.
I thought about returning it, but I like the shape, so I assembled it with no response from the dealership.
View detail
I put it on my CB1300! I had to use a router to get it off!
I put it on a 2012 CB1300SB. the position of the notch of Right Side did not fit I scraped it off with a router and added the color [Color] I bought the Clear, but it's more than 10cm higher than the OEM, so it's really hard to see the front Feel That's why on the highway, you can feel the wind on your shoulders and over the Helmet, but you can feel the wind from under your chin to your chest It's gone Probably a lot easier to use on the highway than the OEM, when the OEM's I used to hide underneath the Cowl, but after I put these on, I didn't have to worry about it, even if it was a lordly ride I like the OEM one better for what it looks like I'm using a handle mirror but the interference is not so bad did not View detail
I want to return it if possible
Unfortunately cutting the Handlebar will interfere with the Handlebar Guard. It is a problem before the evaluation. Regrettably I used the same Manufacturer for my previous Motorcycle. View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
14 year model GSX1300R HAYABUSA
Because the body is Blue, I bought this product because I was looking for Blue's Screen.
First of all, it is 09 - 14, but the shape of R does not match. Thanks to that, we had to remove the Panel around Meter and it could not be installed, so it took time to replace it. Also, after installation, there was a gap in the Panel at the top of the Meter due to forcibly, a step of about 2-3 mm was made on the Cowl side.
In Panel itself, the Length is about the same as OEM, but the height is about 3 cm high, the wind hit is reduced more than I thought.
Regarding coloring, it is deep blue, I like it. Moreover, ETC which was uneasy (Standard Equipment) It also worked safely.
It is nice to see it from a distance, but attention is needed if you care about details.
View detail
Attachment is easy. However, it was thought that the accuracy of a product was inferior pure. There is a crevice between it and a position lamp. A high speed will also become easy, if the location where a wind will hit at the time of a run if
Attachment is easy.
However, it was thought that the accuracy of a product was inferior pure.
There is a crevice between it and a position lamp.
A high speed will also become easy, if the location where a wind will hit at the time of a run if accuracy becomes good and the hit becomes beautiful comes above the bosom and lies down just for a moment.
View detail