Reviews
The construction is simple and requires some ingenuity.
I chose this one because I prefer SIDE with Stages.
Installation Nut is an OEMParts 90179-05523. It is not included in the
You can use the OEM's Screen, or you can use the one that comes with the OEM's Screen.
I bought 4 of them at the same time because I wanted to deform and fix the Rubber.
The OEM has claws for hooking near the Mirror and Meter.
To remove it, Mirror must also be removed.
In contrast, this product does not have such a feature, making installation very easy.
On the other hand, since the fixation is not done at the front but only at the rear nut
The front of the Idling also makes a rattling sound when it is shaken by the vibration of the Engine.
As a countermeasure, we use harness tape, which is similar to cloth and leaves little adhesive residue.
The sound has subsided when I have spread it around the perimeter while adjusting it with Scissors.
Vinitae or something like that would be fine, but I think the Harness type would be better because the glue seems to melt at high temperatures.
Overall, it is good, but it would have been better if there had been claws on the front side to hold it in place.
View detail
Fits: BMW R1200GS, BMW R1200GS ADV, BMW R1200GS RAL, BMW R1200GS EXC, BMW R1250GS, BMW R1250GS ADV, BMW R1250GS HP
Just right.
I installed the Smoked color ones, and the visibility through the Screen was at a Level that was fine even at night.
The windshield works well, but I'm 172cm tall, and when I raise the screen to the top, I have to look forward through the screen, so it may be different for different tastes. (The body is R1200GSPremium line with Normal seat)
Installation is easy, even for beginners.
View detail
Easy to install
It is inconspicuous but seems to protect against mud stains. View detail
FISCO at full throttle but at full throttle.
I have been riding BRUTALE and understand wholeheartedly that it is HIGH PERFORMANCE, but there is a problem.
It is to be NAKED.
At full throttle, a considerable speed can be obtained, but since there is no cowl, the wind pressure on the rider will be at a very high level.
Of course, if a Screen was attached, it would have prevented this to some extent, but I never attached it because of the design issue.
The Puch Screen installed this time is the best match to the BRUTALE1000RR's design.
The performance has been Checked by FISCO.
Even with the FISCO Straight at full throttle and about 280 km/h, the wind pressure was at a Level that did not bother me at all.
Breaking from full throttle also did not cause any anxiety in operation.
I would highly recommend it to BRUTALE riders.
View detail
The first LightCustom you can do
About 3 cm above OEMScreen? It seems to extend upwards.
Wind flow can be felt when driving on the highway.
I'm 169 and the wind blowing from the neck down is obviously reduced, but I feel that the Helmet is often hit by the wind and the Wind Cutting sound is increased.
It's helpful in cold weather.
The design is a different shape from the OEM, but this is cool.
See photo for transparency of Dark smoke. even though it is DARK, you can see the other side.
Installation was also super easy.
View detail
Contributes to stabilization of Long Screen
When we introduced the company's Long Screen, we could not deny that the longer screen was unstable. After installing this product, it became stable. It is not conspicuous when viewed from the side, and it is calm and solidly supports the screen in an OEM-like manner. This product itself is quite heavy, and when moving the screen, the dial becomes hard, so a little hang is required. The price is a little high, and it would be better if the price were a little lower. View detail
Fits: MOTOGUZZI V7 850 SPECIAL, MOTOGUZZI V7 STONE 850
I want to reduce mud splatter.
I didn't want to get the Dynamo cover on my Dynamo cover even if it passed a little bit of moisture, so when I discovered this product... Yes!" I thought
The installation is specified to use both double-sided tape and Rivet, but I don't like Rivet that requires drilling holes, so I stuck the supplied double-sided tape all over the joint and am looking at how it is doing. It is still running about 1000 km and most of the driving is high pace winding driving, but so far it is completely Large and strong. I am concerned about the adhesive strength of the tape under high temperatures in the summer, so I will be careful in the future and keep an eye on it.
My personal ideal is to wear it for function rather than appearance, so I wish it were a little longer (3~5?).
these days I wonder what the turnaround time is." I was glad that it was sooner than I had been notified.
View detail
Hole Cap for CB1000R(2022)
Too much expensive, i would rather make same thing used by 3D printer... haha akward View detail
Fits: APRILIA TUONO 660, APRILIA TUONO V4, APRILIA TUONO V4 FACTORY
Steady pooch!
I chose DARK for installation on my Tuono660. (Because there is no peeking through the Screen like SS) I always choose Puch when I change my Motorcycle, and this time was also good. I don't know about the wind protection effect because I haven't driven at high speeds, but it seems to be effective. View detail
I thought the Radiator guard area was kind of lonely.
I didn't like the feeling of the Handlebar or lightening or floating at high speeds, so I ordered this to see if it would help stabilize it.
The Meter visor is also made by the same company, so the pouch was my favorite manufacturer;
First of all, the bag had a thick cushioning material, but perhaps due to vibration during transportation, the bracket for fixing the blinker to the bag was torn off and popped out, and the exterior parts were wound or even carved into the bag.
I immediately reported this to WEBIKE, who negotiated with the distributor and successfully replaced it with a good one. However, I was a little puzzled by the quality of the product, as the left side bracket was badly distorted and the screw holes did not fit unless the bracket was installed very forcibly.
In addition, the shape of the Wing to be placed inside in the instruction manual is Quantity:Pair (for Left and Right) I was quite troubled by the fact that it was listed in reverse, but the spacing of the Screw holes is Quantity:Pair (for Left and Right) The two are different, so they can only be installed in a way that allows them to be attached.
It looks like there is a wound on the inner wing, but there is a protective film attached, and the wound is only on this film, so it is polished when removed. However, this film is really hard to remove and frustrating.
I could have just returned it if I didn't like it, but the design (shape) is very stylish, and I found it attractive enough to pretend that there were no scratches or that I had to bend the mounting bracket by hand while forcibly attaching the bracket. Can't be helped?
However, from a performance standpoint, the 2kg increase in DownForce? I think it is still a matter of whether you can come to terms with this price, which is more Style-oriented than performance-oriented, since you may not be able to feel it unless you are at very high speeds.
Other products such as Visor made by the company are of very good quality and may be limited to this product or this ROD.
I'm happy with the Design for myself, so I'm glad. I can't say that I am completely happy with it, but … let's just say it's because of the recent depreciation of the yen.
View detail
High Quality Screen
I replaced it because of the danger of distortion made by a certain Aftermarket parts company.
The product has no distortion comparable to OEM parts and is a safe product to choose. The edges are also nicely chamfered and rounded, and it looks like there will be no cuts on contact.
The height of the screen is 30mm higher than the OEM, but the difference in the shape of the high screen can be clearly seen. I expect that I can feel the difference when I get down on the road with the long straights.
View detail
Silhouette is good.
This product is simpler and less assertive than the parts of other companies, and I think it is very good when you want to add height with easy-to-wear parts. It looks good even when it is face down. I have no complaints in particular. View detail
Exchange from OEM
It is windproof enough to be compared to OEMs.
The design is cool and it was the right decision to buy it.
The Bolt holes did not line up unless I pulled on them a little bit, so the quality depends on the individual unit.
View detail
Effective
I think it might be a little standing up, but it worked well at high speeds and improved visibility of the Meter in backlit conditions. TorqueT7 is required for installation. View detail
Effective
It is small, but it is effective. It may be the result of experimentation, but it can also improve the visibility of the meter in backlit conditions. View detail
Puch New Generation NK Screen
[How is it used?
Touring
Was the one you received as per Image?
Street Image
Was the installation difficult?
Easy
How was your experience with it?
Effective
[Included Parts:were they on?
With Bracket
[Was there anything that disappointed you?
If you are concerned about the lack of waterproofness of the bracket part, OEMBracket is a recommendation.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: KAWASAKI VERSYS 1000 SE, KAWASAKI VERSYS 1000 SE TOURER
One size larger than NORMAL!
100 points for me personally.
Best Size
Bugs are now harder to hit Helmet!
View detail
Nice
The material is nice and cool! The flow line is great! Get on the bus and the whole car is full of sports! One of the coolest windshields out there! View detail
Owner of Z900 2020 or newer, please note!
[How is it used?
The day-touring trip of about 150?
Was the one you received as per Image?
It was a little larger than the Image.
Was the installation difficult?
It's easy
How was your experience with it?
It has a windproof effect. It is a large size without it.
[Included Parts:were they on?
important point
The Z900 seems to have undergone a minor change to the 2020 model, and the meter may be related to the full LCD, but the screen of the previous model is not attached.
Currently, we were told that this is the only MODEL other than OEM that can be selected. (There may be others, though.)
I was looking for a Large Screen as much as possible, so this is just right.
Since this is a MODEL to be installed on top of the existing Meter visor, we chose Black after much consideration.
I am satisfied with the product because it does not obstruct my view.
View detail
Fits: BMW R nineT, BMW R nineT RACER, BMW R nineT PURE, BMW R nineT URBAN G/S
It looks pretty good.
I bought this one because it doesn't have an inner fender and I thought it would get dirty when it ran.
Motorcycle purchase store recommended me to buy this one. I am satisfied with the quality and appearance of Large.
I haven't been able to see the effect on driving yet, but I'm quite happy with the results.
View detail