Reviews
I bought it as a backup, just in case
At the end of the year, I purchased a WINS X-ROAD COMBAT and used the included Postcard to enter the I received a free Fogwyn Plus
I need to remove the Visor, Shield to install the fogwins, and various Screw is Material for better Visor attachment:Because it has been written that it is weak with Aluminum, it is a spare Repair Parts I ordered it as
I couldn't find the Coin driver, so I ended up turning in a $500 coin, but In the end, I was able to do it without damaging Screw
So I had to keep it as a spare
View detail
It's cosmetically and visually sufficient
I've been using it for almost a year and I have no complaints
I'm wearing the Income, but there's not much room around the ears, and with the Speaker built in It's a bit oppressive
View detail
Look and functionality ○ , The quality is △
It is SHOEI head, but it was the only one in the head of WINS Helmet so I bought it for purchase.
(Other than that, because temple hurts at the moment of attachment)
One year and four months after purchase, the Inner Visor did not move during Touring, and when I confirmed, foam Styrene was detached from the cap and it was Gap.
After returning home it was removed and confirmed that the construction of the glue was complicated and only two points adhered in the area of ??the fingertip.
View detail
Anyway it is light
I used to use the ARAI Jet and it feels much lighter I went to Hokkaido touring for a week with this, and my shoulder rarely hurts I did not At first, I thought the Teak part was too tight, but I got used to it after wearing it many times I did View detail
It is an excellent item for COSPA.
- I first used it for 200KM Touring.
Functionality - - - Ventilation, InnerSun visor, Buckle, - - - I was able to convince enough.
At this price this function is a hit.
I do not want to be that, but I do not know about safety in the unlikely event - - -.
View detail
Comparison with PINL ◯ CK
Mounting on YJ-17 ZENITH-P
Originally I used PINL ◯ CKShield as it was used, but as the adhesion strength fell in about a year and a half and gaps became possible in Shield, I tried to replace it, in any case I thought to try FOGWIN
Below, comparison with PINL ◯ CK
【attachment】
PINL ◯ CK is more Pin and its position is determined so you do not have to worry
FOGWIN is a little troublesome to paste alone
I asked my bride to spread the Shield and pasted it
Positioning is not difficult as Template can be applied as a guide, but if you look at workability simply PINL ◯ CK is better
Instead, FOGWIN is free to some extent at the pasting position, so it is better to choose a person with a forward tilt upwards, a person with an upper body awake lower, and so on
Although it seems that it interferes when opening and closing the Shield when attached to the eyes too much, it did not interfere with the part installed at the same height as PINL ◯ CK
【Adhesion strength】
Obviously above PINL ◯ CK (Naturally)
I have not peeled off yet, but it seems quite Large seems to peel off
【Performance - function】
None above or below PINL ◯ CK
Antifogging performance will not change at all
There is information that there is irregular reflection saying, but there is also no difference between PINL ◯ CK and Large
【Summary】
I think that there is no performance difference with PINL ◯ CK at all
Because the price is almost the same, I wonder if you can choose whichever you like
However, since PINL ◯ CK can not be installed unless it is a compatible Shield, people using non-compliant Shields are unnecessary and here
As to how long it will last, I'd like to use it for a while
I'm happy to have 2 Season
Once, that part (Durable) Because I am unknown, I am decreasing one star
There are no dissatisfaction points at the moment
In the coming season, the shield's cloudiness is a problem that can not be neglected in terms of both Stress and safety
If you are using a PINL ◯ CK compliant Shield, we recommend that you install FOGWIN
View detail
Cost performance OK
Design is unlikely and impossible.
In this price range, I think that I buy Off Hell with Inner Visor because it has only a certain domestic product.
I am glad that I can receive a defogging shield with the attached postcard.
Since I do not have a handle, I am enjoying it for my own simple Simple.
As for Design I liked even if the overall shape was more aggressive shape closer to Off-road.
Since Chin curtain is sold separately, I think that it is good to have Standard Equipment.
View detail
Cospa high
Design and Equipment (Shield and Inner Shield) , Take Balance of price and safety, purchase for Off. Since the current SG Standard almost conforms to JIS, it is a deciding factor. Is the texture for overseas positives, the texture of the Rubber class is not good. I usually wear SHOEI 's M ~ L, but Ko feels that Pad on his cheek is thick and it is hard for that part. Interior is soft feeling, it is good at all compared with SHOEI about 10 years ago. Painting is not much different from domestic production, somewhat inferior degree. The weight is quite heavy compared to zx - 7. The chin string is not very like a latch type, but when you want to take off quickly, you can leave it as Gloves, so it might be the opposite way. Anyway COSPA thinks good. View detail
Satisfied with weight
I am not tired even if I wear it for a long time.
Currently in use, especially without problems.
I bought XXL, but I feel like I'd be a little bigger.
Use spirit to eliminate eyeglasses on running water.
Although it is System helmet, because of the uneasiness of making opening and closing parts,
I do not know about durability.
View detail
It is suitable for me who has a big head and is not planning to give Speed.
It is a product that is around 61 centimeters above the head, protruding beside the top of the head and a big face and for me.
I also like the place I can do both Jet and Advanced.
A place where the price is cheaper than the two Large Manufacturer in Japan is also good.
I hope I can not try on safety.
I would like other companies to increase the type of XSize XL more.
View detail
It is easy to see
With the replacement of Helmet, Shield is also purchased simultaneously.
Color is Rainbow mirror.
It's not so dark because Light smoke is Base. It is feeling that it can be used without trouble even in Tunnel at night at my own feeling.
But since Mirror works well, I can hardly see the face from the outside during the daytime.
We do not know the durability of Coating yet, but the price is Reasonable so it's OK if it's over there.
I think that I was able to do a good shopping.
View detail
Good shopping was able to be done ♪
When buying a new 400cc Motorcycle
I was looking for a new version of Helmet.
System helmet is the first time, but I did not expect it to be such an easy to use w
Psycho ー! I was able to shop!
☆ + : ° ♪. ☆ + :
? /
♪ ∧ ,, ∧
+ (^ Ο ^ ∩ ゜.
O A
♪ O_ ノ ☆ +.
/ (No?
☆ / / ☆
View detail
For a little ride
For a bit of a ride, I was looking for a system helmet with Inner Visor at a cheap price, but all of XSize XL's that fit my large head are sold out and I finally got in stock. Size is just right, color is my favorite thing, Inner Visor is also Mirror like, I like it.
I hope to be able to ride without compromising strength.
View detail
It's a good price..
A. Merit
- Manufacturer's attitude is good
I can store it under the Seat of each company Scooter or make a conformity chart and publish it on HP is GOOD! I am the first Motorcycle - Initial Helmet, since it could not be confirmed actually, it became Large change reference. Even cars not in the conformity table seem to be able to check if they re Quest.
B. Disadvantage
- Low texture of each part
(1) Inner Visor in and out "Gakutsu!" Suddenly coming out, I feel a little slippery. However, if you manipulate it by putting effort, the dilemma that the damage is scary - - -
(2) Crown vents and Chin guard (* Sold separately) The roughness of the construction can be seen in various places such as BALI in the mouth of the installation, Gate trace of Shield base.
(3) Why was the dust accumulated on the uneven part of the cap body, such as Manufacturer logo and the installation base of the vent, even though it should be a new product?
C. Others impressions
(1) It is a personal feeling, but XXL of this MODEL is Size which is close to XL of JCruise of SHOEI. When purchasing a product of this company, it seems good to look at Size + 1 of Large Hand Manufacturer. * Of course it is most certain to try on before purchasing.
(2) Although it is the effect of Ventilation, it is not realized yet. Even though it runs on a congested road, it seems that there is an effect around Large and not steaming - - - I will add it again.
D. General review
Half price of JCruise, half quality. It is such a product. If it is the same 125cc environment as me, there will be no special deficiency in use. If you are in the Motorcycle of more Engine Displacement Volume, I think that it is better to consider more expensive products.
View detail
I want the texture to be better.
I purchased it because I accidentally damaged Shield base when I exchanged Shield.
Although it is easy to install, the texture is cheap, as dictated by the previous one, it can not be said that the durability is also high in flattery.
It is a fixed part of Shield, so I'd like you to raise the precision of the part where the shield's nail is plugged in particular.
View detail
There is a reason for being cheap.
【What made you decide the purchase?】 Purchased as Repair Parts because Shield got hurt
【How was it actually used?】 Shield seems easy to scratch whether the material is soft.
【Was it difficult to install? (Hard parts case)】 Although it is a phrase that it can be exchanged without a tool, it was hard to get out due to the structural problem of Shield base.
【Please tell me the point of installation and hang (in the case of Hard parts)】 Quantity on One Side : Every 2pc has nails attached, the front can be easily removed, but behind it will not break off unless you dare to pull with force technique.
[Is there anything I was disappointed about?] It is severe to compare with domestic Helmet, but it looks distorted as you go to the edge of Shield. Also, the resin is soft or scratched easily. Even though I think it is aging, though it is a matter of the quality of Plastic, even if it is on the surface Beauty, things like fine Wound become visible in direct sunlight in myriads.
【Hope for Manufacturer - Please let me know if there are any improvements; I would like Shield and Inner Visor to improve the distortion of Lens.
【Have you compared items?】 None.
[Others] Compared to domestically produced luxury Manufacturer items 1 / Although it is about 3, although the interior is solid and the flip up mechanism also moves smoothly to Smooth, it is a well-made Helmet, but the details also have some parts to compromise to some extent in price. But since distortion of Lens is related to safety, there is a part that I want you to improve even if Cost goes up.
View detail
A little disappointed with low durability.
Since the Screw of the flip up portion of the CR - 4 that I normally use was loose, I tried to remove the Shield to tighten it again, I broke the nail of the Shield base and purchased it as for Repair. CR-4 itself has already been discontinued, but this part was saved because it was a common part with CR-1 modify.
The exchange itself is easy, but the material itself seems to be brittle, so I tried to install the shield after replacement, and a part was missing. Although it is used as it is because there is no problem, it seems better to think that this part is a consumable item.
View detail
A field of view fades whether it is a cause of a Glasses, and since its face was reflected, I did not want to use not much, although the Inner Visor also used at the time of pure.It had changed into the Smoked shield by that.Although it is perfect in the
A field of view fades whether it is a cause of a Glasses, and since its face was reflected, I did not want to use not much, although the Inner Visor also used at the time of pure.It had changed into the Smoked shield by that.Although it is perfect in the daytime [
], since it was dark, how kana - is thought and it purchases at night.
It was still darker.It is satisfactory in the daytime [ ], and since appearance becomes good, it is satisfied so so.
View detail
It uses in combination with Income SMH-5FM of Sena. The Base of the Clamp type can be used and a Speaker is attached as it is. A Boom Type can set a microphone just before. A wind noise is loud although it is light compared with Scorpion cur
It uses in combination with Income SMH-5FM of Sena.
The Base of the
Clamp type can be used and a Speaker is attached as it is.
A Boom Type can set a microphone just before.
A wind noise is loud although it is light compared with Scorpion currently used for another season.
However, an engine sound can often be heard.
Although the optional Chin curtain is attached to the cold of winter, in a Full face type, it is a plug now [ enemy ].
Although it is generally satisfied, at the time of the stop at the time of a chilly morning or rain, what a Shield becomes cloudy with easily is a difficulty.
It is satisfactory if it begins to run.
View detail
(webike Monitor) Even if this Shield had the cheap price compared with the pure Shield of a domestic Helmet and it got damaged, since it was cheap, felt charm also for the Mirror shield which I regard as the ability of a change to be done comparative
(webike Monitor)
Even if this Shield had the cheap price compared with the pure Shield of a domestic Helmet and it got damaged, since it was cheap, felt charm also for the Mirror shield which I regard as the ability of a change to be done comparatively comfortably, but.
Since an Inner Visor is a Mirror, since it is the same as the standard Shield which considered the night run and was made into the Light smoke, I can equip completely comfortable, and think considering a price that it is solid and that I will exchange for this Shield again if the small Wound in accordance with use sticks.
View detail