Reviews
![SPI-K71 Shift Position Indicator Exclusive Kit [for 2001-03 ZRX1200R]](https://img.webike-cdn.net/catalogue/images/41170/protec001_TS.jpg)
Fits: KAWASAKI ZRX1200R, KAWASAKI ZRX1100
Mounting on ZrX1100
Purchase for friends ZrX 1100. products are "ZrX1200R 01-03 exclusive use" Although it is the same as ZrX 1100 and MeterWiring, the kit can be used as it is. However, since the GEAR ratio is different from 1200, it is necessary to reset by actual driving after resetting.
Reset needs hang. When it is pushed slowly three times, it is not reset and it is comparatively slow "Cha Chica Chi Chi" And it should be done three consecutive times.
Also, I fixed the installation Bracket to Caliper Mount Bolt with the same, but it is difficult to manage Torque management by turning around. If you put Stainless washer between Bracket and Bolt it will be hard to turn around.
This Kit, Interruption Harness is only 3PCoupler, Neutral signal is designed to interrupt on Neutral line of 6PCoupler with Electro Tap. Because I did not want to hurt OEMWiring, I bought DAYTONA's 110 type 6PC coupler kit and made an interrupt Harness separately.
View detail
Fits: KAWASAKI Ninja 1000 (Z1000SX)
Impre street of the other person!
Installation is easy without setting.
But, once installed (paste) Shif Trump setting can not be done. We recommend that you attach a book after setting with temporary fix.
View detail
![HS-K41 Vehicle Exclusive Shift Position Indicator Harness [NINJA250SL 2015-16 BX250A]](https://global.webike-cdn.net/photo/article/46/1452934177346L.jpg)
Fits: KAWASAKI Ninja 250SL, KAWASAKI Z250SL
Kawasaki car has few Shift positionIndicator display
Since Protec's Shift positionIndicator kit was purchased when it was on the NINJA 650, this time we purchase Only Harness.
It costs about 15000 yen at the beginning, but since you only purchase Only Harness afterwards, the threshold will go down much.
To install it, I just remove the Cable on the back of the Meter and interrupt it, the Point that comes with Seat for Waterproof is also high.
The difficulty is that sometimes there are cases in which Clutch is grasped or downshift is not good and accurate figures are not displayed. However, I think that Point is individually high, being released from the Stress trying to enter the vision of the seventh speed.
View detail
Fits: YAMAHA FZ1 N, YAMAHA FZ1 S, YAMAHA FZ1FAZER
Quick response, no malfunction
I figured out the Gear position from the number of revolutions and the vehicle speed, so I thought whether it would malfunction if Idling rotation was low rotation, but there was not such a thing at all and when the full engage of Clutch was done, the correct GEAR It shows.
Shift positionIndicator is also easy to understand with good visibility.
Regarding assembly, FZ1 ECU is under the Air cleaner box, so it's a little troublesome because you need to remove the exterior, Tank, Air cleaner box.
However, as soon as it reaches that point, it is easy to understand in the Instruction Manual, so I did not get lost as I wrote about which line to connect to which line.
However, Wiring method is Electro Tap, Body installation bends Bracket by hand Double-sided Tape, Harness is abnormally long (Line is quite extra) etc. Although I am a little dissatisfied with it, I am looking forward to making it better because it is all within the range that individuals can handle..
View detail
Fits: SUZUKI Address V125S, HONDA Lead 100, HONDA Spacey 100, HONDA Dio (4-stroke)
Attention to Light shape.
I heard that the LED Bulb of PH-11 was released and checked it at Manufacturer 's HP and it was not in the corresponding model so I went for a moment. Because LEAD 100 is half wave rectified, it is because I have been bothered by rising Battery when I converted it to HID before.
That's why, as I saw Manufacturer attaching this product to LEAD at a Parts dealer "Oh Large I'm sturdy" I thought it was a purchase.
Although it is installation, since LEAD has less space behind the light case, you have to make an electric fan offset but there are parts for that so it is not so difficult.
In terms of performance, this Valve is LOBeam only for the top surface, HIBeam for the lower surface additionally fires. As you can see, LEAD is Quantity : Pair (for Left and Right) Reflector on the top and bottom surfaces is not very effective long. It seems like there are a lot of lights to diffuse.
It will not be a problem if you are using a light case that uses standard up and down.
However, even including it it became brighter than Halogen's 40 W. It is somewhat worrisome when it comes to HiBeam, there are things that will be slightly flickering.
Since it is still about a week's worth, it is a matter of concern whether future Battery will come out.
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA monkey
Shift positionIndicator kit
Consider mounting Shift positionIndicator along with 5 speed of MONKEY. Although there were other Manufacturer, I bought it with reference to the fact that the Harness exclusively for MONKEY is set and the evaluation of everyone's impression.
Although it was thing only for MONKEY, just to make sure whether additional purchase of Tachometer signal converter PG - 220 is necessary, purchase a set item with answer of unnecessary - Installation. Then an error indication of R will be displayed in the middle of setting and it becomes impossible to set. As soon as I contacted Manufacturer, MONKEY had many customers, and when I customized the electrical system, it is told that there is a thing that does not detect the rotation signal and it may be broken, so send it to Manufacturer Things to inspect. (It cost 2,000 yen for return shipping fee shipping fee) I wanted you to tell me in the first inquiry. As a result of inspection, it is said that purchasing PG-220 and trying to install it because it is not broken, it got added to purchase and somehow worked properly.
View detail
Burglar alarm for Motorcycle
As a countermeasure against theft of MONKEY, I searched variously, I decided on this product with reference to Impre. Installation is easy if the position is decided. Although the previous one seems to have a vibration sensor, since the current thing is only 3G sensor, it seems to be ineffective for parts theft, but the response of Sensor is good, the sound is also quite large Large antitheft effect is I think that there is.
Set the alarm, do not do, but I thought that it was easy to do it freely.
View detail
![[Optional Parts] MG-15 Magnet Set For Repair](https://img.webike-cdn.net/catalogue/18697/11027_mg-15_TS.jpg)
for Repair Magnet Set
I mounted Shift positionIndicator on MONKEY but purchased as a replacement part at the time of magnet dropout or DrivenSprocket replacement.
I think that the magnet can be reused, but since the Adhesive Seal needs to be exchanged when pasting the positioning Seal, I felt that the spare was necessary.
View detail
Fits: KAWASAKI D tracker, KAWASAKI D Tracker X, KAWASAKI KLX250, KAWASAKI KLX250, KAWASAKI supersherpa
Easily viewable
Mounting on DTRACKERX 2015.
It will do something with the attached Instruction Manual, but Neutral's Wiring (Wakaba color) , MeterWiring (In RubberTube) Somewhat agitated to pull out from.
To access Wiring of Wakaba color from Wiring under Meter, I cut out a part of RubberTube and peel it out and look for it out of 10 pieces.
Wakaba color is Quantity : There are 2 pcs, but those who do not have RedLine.
The Indicator was pasted on the side using Double-sided Tape attached to Meter's Right Side.
I tried doing Jack-up to set the Gear position, but I was not seeing it because I had less vibration.
I will also run while running on a fine weather day.
View detail
Fits: KAWASAKI ZRX1200R, KAWASAKI ZRX1100
ZrX1100 Shift indicator
ProtecPROTEC SPI-K71 Shift Position Indicator Kit for ZrX1200R 2001-03 The model was attached to a friend's ZrX1100 ZrX1200R 01-03 and ZrX1100 can be installed according to the Instruction Manual for ZrX1200R 01-03 because Wiring around Meter is the same. However, since the GEAR ratio is different, it is necessary to reconfigure in real running after resetting.
In the Instruction Manual, the Neutral line is designed to interrupt the Neutral line of 9 PCoupler with Electro Tap, but since I do not want to damage the OEM line, I separately purchased the DAYTONA 110 type 9PC coupler set to create an interrupt Coupler.
The installation of the SPI-110 was the 5th in this time, three of them were universal, so we reset and set again. This time I had a hard time with Reset. First slowly press the Set button three times (About every 1 second or so) I did not reset it even if I did it many times. Therefore, 0. Reset was done by pushing 3 times quickly at about every 5 seconds. Confirmation that Reset succeeded is Neutral's 0 indication after Lamp blinking under Right. If it does not blink and it remains 0, it is not reset.
Although it is a setting in actual driving, if it is up to the third gear it seems that you can continue setting even if you drop GEAR, even if you do not set it with a long straight line at a moment, traveling while setting to a certain straight line to 3 so far (Large is durable even if GEAR is dropped in the signal wait if it is up to the third gear) , It is good to set 4th speed 5th speed with a certain degree of straight line.
View detail
I'm installing it now..
I opened it to install it, but look at the Instruction Manual "Is it impossible for me?" And I think that I would like to ask a contractor. For those who can install it yourself, I think Gold is also reasonable with Reasonable. It seems that the labor cost is high. View detail
Fits: HONDA CB1300 SUPER BOL D'OR, HONDA CB1300SUPERTouring
Easy installation
Easy to install and could be installed immediately. , GEAR position became clear, it became easy to ride. It is even better to change the glowing color of numbers. View detail
![SPI-H14 Shift Position Indicator Exclusive Kit [for 1909- VTR250Fi]](https://global.webike-cdn.net/photo/article/66/1439356879166L.jpg)
Fits: HONDA VTR250
Mounting on VTR 250 - 2015 MODEL
Introduced for the vision of the sixth speed vision w
Installation was easy, and installation Instruction Manual by car type was enclosed so we could install without trouble.
The necessary tool is only Phillips Screwdriver and installation is completed with Extra Processing Not Required.
If the price is a little cheaper it is a perfect score.
View detail
Fits: YAMAHA WR250R, YAMAHA WR250X
Seven-speed evasion of vision
Since it is a special kit, it is completed by inserting Coupler of MeterReverse side, work of burning Wiring to ECU under Seat, pulling Wiring down Seat from the back of Meter.
The impression used is switched to Smooth on the screen, it is easy to see and fun.
It seems unnecessary for someone who understands the Position of GEAR with bodily sensation, I feel like I'm done without putting it in the seventh speed of vision.
View detail
![SPI-H30 Shift Position Indicator Exclusive Kit [for 2013- CBR400R / CB400F / 400X]](https://global.webike-cdn.net/photo/article/93/1434289143493L.jpg)
Fits: HONDA 400X, HONDA CB400F (2013-), HONDA CBR400R, HONDA CB500F, HONDA CB500X, HONDA CB500F, HONDA CB500X
Operation sure
400X, but it is Large strange work to remove Cowl as a vehicle type, and it is necessary to lift Tank for wiring to Ignite Coil Anyway Large change.
The connection itself just poisons the Coupler, it is good for the car type only to make Setup unnecessary.
It is not a linear reaction but a change in display after a delay of one TEMPO 13, and the display can not catch up quickly when downshifted at the time of stopping is a system-wise place, but GEAR positivity is not shifted and operation is certain.
View detail
It is a fair response and good reaction ~
Sensor's response is also nice.
It is easy and easy to install NAKED.
Installation work is about 30 minutes to 1 hour.
It is convenient because you can set by just turning ON and OFF the key.
View detail
![SPI-K54 Shift Position Indicator Kit [for Ninja 250].](https://global.webike-cdn.net/photo/article/62/1381299155662L.jpg)
Fits: KAWASAKI NINJA250R, KAWASAKI Z250 (2013-)
It has attached to Ninja250.Since there is a Kit only for a vehicle type, it is overly easy work [ only inserting between the Connector of a Meter flesh side and a Main harness ].Even if it does not remove the Front cowl, it can do somehow, but the way re
It has attached to Ninja250.Since there is a Kit only for a vehicle type, it is overly easy work [ only inserting between the Connector of a Meter flesh side and a Main harness ].Even if it does not remove the Front cowl, it can do somehow, but the way removed since it adjusted regards management of wiring of the removed way etc. as good as a result.
Although it is an important effect, it becomes [ May not I be as a Title? ] and is a place.Although it was a little late for the Timing of a Shift change, it seldom became mind.The circumference of a Meter thinks of itself to the grade which became busy (smile).
View detail
It was a satisfactory product.Attachment was also easy and the electric amateur's one has also attached it in about 30 minutes.I think that sensitivity adjustment is just performed if it can do since malfunction by a strong wind takes place occasionally.
It was a satisfactory product.Attachment was also easy and the electric amateur's one has also attached it in about 30 minutes.I think that sensitivity adjustment is just performed if it can do since malfunction by a strong wind takes place occasionally. View detail
Since the talk of Z system theft was heard well recently, it purchased.I think that attachment is also easy and a theft deterrent effect is large.The place which it is [ place ] only the way of ON/OFF of pure key, and has ON/OFF of a Security
Since the talk of Z system theft was heard well recently, it purchased.I think that
attachment is also easy and a theft deterrent effect is large.The place which it is [ place ] only the way of ON/OFF of
pure key, and has
ON/OFF of a Security switched is a favorite.There also seems to be little battery consumption at the time of
standby.
Although the main part was installed in
Tail cowl, the flashing lamp under
Security operation did not reach the circumference of a Handle in that case.Wiring should just have excelled 30 more cm! Since it will
Become a nuisance to the neighbors if it sounds at night since sound is loud more than it considered, cautions are required.
View detail
It attached to PCX125 ESP (FOR JAPAN MODEL).It is that it is safer whether to do from the state removed also in the description when there is no confidence to remove, since explanatio
It attached to PCX125 ESP (FOR JAPAN MODEL).
It is that it is safer whether to do from the state removed also in the description when there is no confidence to remove, since explanation has started.since, as for attachment, a description is also color -- a solution loan -- I am easy -- since it comes out and only changes with wiring of sushi and the original Headlight of PCX, I think that it is not difficult.(Because of the goods only for a vehicle, there was no processing and it was Pons attachment.) Since it is brightness
and25W, it is felt darker naturally than 35W, but all over a town, it is sufficient brightness.Does it change to this [
appearance
and / this ]? He is smart even if it sees how many times.Mr. Protec of the Manufacturer had purchased the goods of the exception before, since correspondence of the Trouble at that time was also good, it was trusted and he has purchased.Although the
price is stretched, I think that they are satisfying goods!
View detail