Reviews
Is good
We are a reliable manufacturer
Fitting and texture both
No problem
And the wind protection I was hoping for
It's good
[Color] If only the smoke was a little lighter
It was even better, but it's a matter of taste
Some of the small mouths were turning white, but
It's not a problem with Magic to the extent of Repair
View detail
Fits: BMW R1200R LC, BMW R1200RS LC, BMW R1250R, BMW R1250RS
The construction is solid
Installation required a plastic hammer for some locations, but
The texture was quite good It is well attached and medium in appearance I would recommend it
View detail
Fits: BMW R1250RT, BMW R1250RT, BMW R1250RS, BMW R1250R, BMW R1250GS Adventure, BMW R1250GS, BMW R1200RT LC, BMW R1200RS LC, BMW R1200R LC, BMW R1200GS LC, BMW R1200GS LC, BMW R1200GS LC Adventure
I'm generally satisfied
I thought it would be easy to install, but the O-ring that attaches to both SIDEs is too tight It did not fit (It was not able to be installed in the position as described in the Catalogue and was removed once! (It was a bit of a tight fit and took a lot of work to remove it.) The instruction manual? It wasn't mentioned in the book, but I applied Silicon spray to the O-ring and finally got it to work I was able to install it as shown in the picture, and the fact that the screw of the Swing Arm Slider was loose is also a problem Screw lock agent (medium strength type) was applied View detail
Fits: BMW K1600B, BMW K1600B, BMW K1600GT, BMW K1600GT, BMW K1600GTL, BMW K1600GTL, BMW K1600GT, BMW K1600GTL, BMW R1200RT, BMW R1250RT, BMW R1250RT, BMW R1250RS, BMW R1200RT LC, BMW R1200RS LC
I'm happy with how it came together
I was looking for a bracket to mount a Radar around the Handlebar and I was wondering if I could find a bracket for my R style and Wonderlich's Bracket were the two choices; R-style was missing I choose this one because it was in the middle As a result, I was satisfied with Large as a result of being settled simply and the area around the Handlebar is neatly arranged We are View detail
![Hand Guard [Clear Protection]](https://global.webike-cdn.net/photo/impression/07/07850f98bc64ef20bbe71cc42d7420b4L.jpg)
Fits: BMW RnineT, BMW R1250R, BMW R1250GS Adventure, BMW R1200R LC water-cooled, BMW R1200GS LC Liquid Cooling, BMW R1200GS LC Liquid Cooling, BMW R1250GS, BMW R1250RT, BMW R1200RT LC water-cooled, BMW R1250RS, BMW R1200RS LC water-cooled, BMW R1250RT
The wind protection is good
[Was there anything that disappointed you?
Just as I hoped
Do you have any wishes or improvements you would like to make for the Manufacturer?
This is a 2 point stopper for R100 ROADSTER I replaced it with a LeverBracket and stopped the Mirror section as well Please look at the pictures
[Do you have any products to compare it to?
There was nothing special about it
What made you decide to buy?
With Brand's Image, I thought I'd get a product that would be fine
How was your experience with it?
High wind protection, although BMW has a Grip heater on most models
The Handlebar Cover is very hard to put on The coldness of the fingertip has been improved
Matches the parts of the Cowl Department
Was the installation difficult?
It's easy, if you have Torx wrench
【Please tell me the installation point and hang】
In the case of the RS, the Mirror is attached to the Cowl, so the upper part cannot be fixed
I think it's a good idea to order it at the same time as the Type that has a screw hole in the Mirror for the R
I don't know if a two-point stop is a problem, but Hand guard is usually a three-point stop
[Was the Instruction Manual easy to understand?
It is easy to understand, with illustrations and instructions
[Included Parts:were they on?
It also includes Screw, which is not necessary for other cars
[Others]
I bought this for the cold weather, but it's also a good summer bug repellent
It is wind and insect resistant
View detail
Almost satisfied
The length of the Extension is a bit longer than other products I chose it because it's a good choice It is easy to install without removing the fender View detail
Fits: BMW R1250RT, BMW R1250RT, BMW R1200RT LC water-cooled
I'm generally satisfied
I bought it because I was worried that there was little ground contact of the Side Stand I chose a product that is less thick than I expected As a result, when I put in and out of the Side Stand at the time of getting into and out of the car, it became easy for my toes to catch However, you should be careful about the looseness of the mounting screws Regardless, one of the screws was loose in one of the three places after about 300 km of installation View detail
![Key Cover [Key less Ride]](https://img.webike-cdn.net/catalogue/images/53229/44115-900_01_web_TS.jpg)
Fits: BMW R1200R LC water-cooled, BMW R1200GS LC Liquid Cooling, BMW M1000R, BMW R1200GS LC Adventure water-cooled, BMW R1200GS LC Liquid Cooling, BMW R1200RS LC water-cooled, BMW F900GS, BMW K1600GTL, BMW K1600GTL, BMW K1600GTL, BMW K1600GT, BMW K1600GT, BMW K1600GT, BMW R1250R, BMW R1250GS, BMW K1600B, BMW K1600B, BMW R1200RT LC water-cooled, BMW K1600 Grand America, BMW F900XR
not as much as one might think
It doesn't look bad, but it doesn't feel luxurious to the touch
The design is good, and I would like to see more detail in the design It's a bit disappointing because of the price
View detail
It is not usable
I bought it in the early spring, but the time of use was delayed due to some mounting parts missing etc I drove it on the highway and it was not very drivable due to the turbulence it created Also, I found out later that the design was completely different from the design shown in the pictures (No VCut at the top, etc.) We have received a product in shape View detail
Fits: BMW R1200R LC, BMW R1200RS LC, BMW R1250R, BMW R1250RS
To protect the Frame
I was looking for something to seal up the holes in the Frame that had rusted due to moisture left in the holes from washing cars
Installation is easy Just push it into the hole
It's a little tight so it won't seem to come off while driving
It's going to be a bit of a dress-up with the Logo of Wonderlich in it
View detail
Fits: BMW R1250RT, BMW R1250GS, BMW R1250GS Adventure, BMW R1200GS LC Liquid Cooling, BMW R1200GS LC Liquid Cooling, BMW R1200GS LC Adventure water-cooled
I wish I'd bought it sooner
I'll go ahead and conclude I can recommend it
This product, for me, is the same GSRider, and I'm surprised that there are not more in-play reviews Since it was, I thought I'd review it in a bit of detail
Motive for the purchase
First of all, I'm about 176 cm, 73 kg, and hand length for BUSINESS If we say Shirt, the length of the sleeve length 85-86cm, so-called L Size and With the LLSize specials, the sleeve length/wrist of the Shirt is so short, the longer hand is the better It is
In that sense, I think it's a perfect shape to ride a large motorcycle In the past, Harley, Ultra and other large motorcycles have been I've been riding it for a while now But this BMW R1200GS was only uncomfortable when I first started riding it, but it's been a year and a half After a couple of years, I started to feel the pain of the Elbow and thought about buying it It's something I don't feel when I'm riding SecondMotorcycle's KLX250 After all, I think it is due to the riding position peculiar to R1200GS
Even if you don't think you are aware of it, you can accelerate and decelerate at a reasonable rate, or you can use the Corner When ringing, the fact that you are subconsciously running with both arms stretched out is a sign of fatigue and I realize that it led to Elbow's pain Because of that, I thought this product should be perfect for my body shape, but if it can improve.. I have considered purchasing a I hope this will help those of you who have a similar realization!
Product Quality
A few imprecisions said that the product itself, the appearance of the product was badly scratched... by chance Bingo I don't know if it was, but there is nothing in the appearance of the product that gives me an unpleasant sensation, and the so-called normally Brand new It looked like
I've seen personal blogs, etc., and the special Wonderlich box was up on the blog images But when I opened my purchase, I opened the box for We-Big's mailing and carefully wrapped it with Air cap It was in a certain state Perhaps Mr. We-Big could open the Wonderlich product once and check the product quality and Original packing from "Inspection of the logistics process I wonder if they have a? ...and I imagined that, but I don't know exactly what's going on here on the buyer's side
Anyway, the appearance of the product I purchased was perfectly fine
Installation
No problem at all I think the assembly is within the range of anyone can do it Just to be sure, before you remove the Normal riser, you need to make sure that the center position of the handle itself is off There is no need for Quantity:Pair (for Left and Right) I put masking tape on the part of the handle and the Riser the so-called "Marking and then worked on it
The instruction manual is not readable at all because of the translation (not entered here, but the photos and the tightening Just look at the Torque display and I think anyone can understand it and not worry about it
Actual feel of the car
After installing it, I drove about 250km, but first of all, although it is natural, it is a normal Riding Elbow's bend and leeway is totally different when running in position
Because the acceleration and deceleration and cornering are done from that state, Elbow's room is naturally created and There is no longer a need to support the deceleration weight with both of my protruding hands
This is an improvement that cannot be resolved by individual driving ability alone, but comes from the margin of position I could feel it was effective
I was hesitant because of the high price, but now that my Elbow pain is gone, I bought it sooner I wish I had kept it
If you are considering purchasing this product, I hope this is helpful
View detail
Batch!
S1000R (2017 model year) It was installed to
Parts precision is good and easy to install!
Batch! Parenthesis better!
View detail
Fits: BMW S1000XR, BMW S1000RR, BMW S1000R, BMW C400X, BMW F900R, BMW F900XR, BMW R1200GS LC Adventure water-cooled, BMW R1200GS LC Liquid Cooling, BMW R1250GS, BMW R1250GS Adventure, BMW F850GS, BMW M1000RR, BMW M1000RR, BMW F900GS Adventure, BMW M1000R, BMW F900GS, BMW F850GS Adventure, BMW R1250R, BMW R1250R, BMW R1250RS
perfectly (suited)
It is used in the TFTMeter of R1200GS
It's easy to install because it fits into the meter's outer ring
I recommend it because it's well made and well built
View detail
Fits: BMW S1000R, BMW S1000R, BMW S1000R, BMW S1000RR, BMW S1000RR, BMW S1000RR, BMW S1000RR, BMW S1000RR, BMW S1000XR
As expected, only for car models
It is easy to use because it is a reliable Manufacturer and it is dedicated to the car model. I bought the Maintenance Stand for the first time, but if you have S1000 RROwner it will not be damaged. View detail
Fits: BMW R1200GS LC, BMW R1200GS LC, BMW K1600GT, BMW K1600GT, BMW K1600B, BMW K1600B, BMW S1000XR, BMW R1250RT, BMW R1250RT, BMW K1600GT, BMW R1250GS Adventure, BMW R1250GS, BMW R1200RT LC, BMW R1200GS LC Adventure, BMW K1600 Grand America
You will be able to get on your feet a little better
It will be slightly better on your feet
I think I'm leaning forward a bit more
It's cheaper than the seat processing, but
It's not cheap considering the Material
View detail
It's really nice..
I do not need any special tools for installation work, I think that anyone can do as long as 30 minutes. I was worried about the length of Throttle Cable, Clutch Cable, Brake line, but the only thing that needs adjustment is Clutch Cable, which can be easily adjusted without tools, so there is nothing wrong.
It only increases the height by 25 mm, but the wonder and the benefits are Large, the fatigue feeling of Long touring is considerably reduced.
Originally, with the same height as the G310R Handlebar something that Manufacturer sells is questionable itself, you can drive with a natural Position.
The biggest benefit is Large is improvement of Position when standing. Depending on the height of the OEM, depending on the height of the Rider, I am 182 cm, so it was fairly improved that the honest Handlebar was too low and painful.
It will depend on your physique but it is quite a Recommendation.
View detail
Fits: BMW G310GS, BMW G310R, BMW RnineT Scrambler, BMW RnineT Urban G/S
It can also be used for G310GS
Originally it seems to be designed for other car models, but it can also be used for G310GS. It's very easy to install with just two Bolt sandwiching Brake pedal and fixing.
The O3Brake pedal of the G310GS is very small and the installation position is too close to the car body side, so it is tough to keep the feet on the Pedal at all times.
By installing this product, you can extend Pedal to the outside, although it is a little a couple of inches. Although it is only about 1 cm, the effect at the part where it always operates is Large, the burden on the ankle can be reduced to the Large width.
However, since it is not Exclusive Design, the form of Plate is not clearly matched, and a sense of incompatibility on Design remains a little. I do not mind it because it is not a part that I always see.
Also, Material : Even with Aluminum, heavy parts will be attached to the Brake pedal so that the switch of the searre Rear brake will easily react to it. Even if you do not wear Brake, the Stop-lamp lights up just by touching it a little, so you need to be aware of it.
I feel the price is honest and high. I think that it is considered as a Brand fee as a famous Manufacturer, but many similar products are sold, so I think there is considerable room for selection.
View detail
Is useless
I think there are individual differences, but the installation hole Gap, the angle with the vehicle Gap, the included Torx bolt breakage etc. It was the worst. I am planning to purchase Handlebar Up Spacer, but I'm worried. View detail
Fits: BMW S1000R, BMW S1000XR, BMW F850GS Adventure, BMW S1000R, BMW S1000XR, BMW F750GS, BMW F850GS, BMW RnineT, BMW F800R, BMW F800GS Adventure, BMW F700GS, BMW F700GS, BMW F800R, BMW S1000R, BMW RnineT, BMW R1200R, BMW R1200GS, BMW F650GS, BMW R1200GS, BMW R1200R
If you use Original parts
Accuracy as Parts is sufficient, there is no dissatisfaction.
I can not deny that the handlebars are slightly noisy, but it certainly makes it easier to check backwards.
View detail
I would like to create a little Small
If I escaped while leaving the pass road as usual, footpeg arrived on the road before rubbing and both of them were broken.
I do not have cold, so I think that it should be used in use that can not keep the vehicle too much.
View detail