Reviews
Fits: BMW RnineT, BMW RnineT, BMW RnineT Scrambler, BMW RnineT Racer, BMW RnineT Pure, BMW RnineT Urban G/S, BMW RnineT /5, BMW R12 nineT, BMW R12
It looks better, but it is somewhat unwieldy
Do you want ThrottleControl 's function for long hours of highway driving etc?
The so-called Plastic's Throttle assist is cheesy, and there is a feeling of disturbance even if it says anything.
Every time I detach it, I hear the scratches on the Grip, and there are opinions that I can turn it against the other, but it is still an obstacle.
For this product, you will get a satisfying feeling of Large in terms of high quality, appearance and texture.
However, because it was installed in 2018 MODEL, the gap with the ThrottleGrip end got about 5 mm free.
Also, since horizontally opposed two-cylinder Engine uses AxelOff and considerable engine braking will benefit, ingenuity is necessary for locking and releasing. I think that Multi-engine is quite handy.
View detail
I am helping..
I tried various methods of CAGIVA 's V - Raptor' s loading, but I finally found it. (9 years from purchase of Motorcycle)
I was able to install it immediately.
View detail
![Hand Guard [Clear Protection]](https://img.webike-cdn.net/catalogue/images/75689/27520-501_04_web_1.jpg)
Fits: BMW RnineT, BMW R1250R, BMW R1250GS Adventure, BMW R1200R LC water-cooled, BMW R1200GS LC Liquid Cooling, BMW R1200GS LC Liquid Cooling, BMW R1250GS, BMW R1250RT, BMW R1200RT LC water-cooled, BMW R1250RS, BMW R1200RS LC water-cooled, BMW R1250RT
It is a reliable product to become credible Wonder Rich.
Hand guard installation situation is good, it is definitely a wind blow. It is made to not hit the Cowl neatly. I like the OEM Product and I like it, I will definetly like it! I like it. It is likely to be used for a long time. View detail
10 cm longer than NORMAL
In order to improve Sharp's StandardRear Fender, Parenthesis bad outer Fender,
I bought it. It will be about 10 cm longer. I do not know the effect, but outside Fender
I removed it..
Purchased from Rakuten Week by the convenience of hand-held Point
View detail
Quite effective
Installation is in German, but manuals are attached quite easily if you attach them in the order in the photos. I came running with mounting immediately, but there is quite a windproof effect. Since you can freely change the angle and height, you can position it according to your Motorcycle. View detail
Fits: BMW R1200R, BMW R1200GS, BMW R1200GS, BMW R1200GS Adventure, BMW R1200GS Adventure, BMW R1200ST, BMW F650GS, BMW R1200S, BMW R1200GS Adventure, BMW R1200R, BMW R1200GS, BMW K1200R Sport, BMW K1200S, BMW F800ST, BMW K1200R, BMW F800S, BMW F800GS
High
It was easier to use than I thought and I was touched a bit.
Cancellation with Norck.
However, if you look at the Material and making of the product, I feel that the price will be higher.
View detail
Running is easy
NORMAL Screen does not exist, etc. I bought it at Shisei. Thanks to this, the fastest, cruising speed has increased but there is a feeling that it looks a little bit. It is likely to be attached to the S1000R geometrically after F800R 's 2015 year? View detail
Fits: BMW R1200RT, BMW K1200GT, BMW G310R, BMW K1300GT, BMW G310GS
Difference between existence and nothing
When it comes to high-speed long distance, I want to release Right hands even if it's a bit better. That is possible. By turning the Blue part to Right, we push the Grip in the axial direction and stop it. In fact, you can turn with the Small finger so that the Right hand is shifted and sent, or you can turn it with the Left hand with Right one hand driving condition. You can cancel Cancellation as is or return to Left with the fingertip of Right hand. View detail
Tourer's comfort and maybe not even
Three months passed after wearing it.
I am doing a fast Touring several times, but the wind protection of the upper body is reasonable.
The wind hits only the upper part of the Helmet, even in high-speed driving for a long time
There is no discomfort.
Material is thick, there is no gravity by wind pressure.
However, because it is impossible to prevent the wind from flowing in from the gap with Headlight etc.
After all it is somewhat impossible for Tourer's comfort to be NAKED.
Therefore, it may be said that the upper body is almost windless, but the neighborhood of the stomach is
I can feel the wind pressure pretty much.
Those who purchase will think that you should pay attention to this part.
View detail
Fits: BMW F650GS, BMW F800GS, BMW F800GS, BMW F800GS
It is comfortable ♪
'08 F650GS (800cc) Mounting on.
RALLY 790 was added to the OEMScreen almost from the time of new cars, but in search of further windproofness Up dating.
The real thing is a thin Smoke, packing up "Light smoke" With display.
Actually, Smoke which is thin enough to not be photographed, and expectation of ordinary Smoke is slightly disappointing presence and presence.
Two holes out of 6 holes fit a little, but attaching if attaching forced, but because it concerns Crack in long-term use, it machines a slightly long hole and it is OK. Since it passes through Rubber Bush, some gaps can be absorbed.
Also, since the upper side of the screen side and the lower side of the OEMKnuckle guard interfered with each other near the Left full lock, adjustment was made so as to shave a little by the sander and not interfere. Acrylic? It seems that the quality of the resin is good and because it is thick, there was no worry that Crack will enter.
When I tried running it, the windproof effect was the effect Large, as long as it was not strong wind, 80 km / H with NEOTEC 's Shield open..
Still the wind entered GunGun at the top of the Ventilation, so the adjustment of rectification was exquisite.
Wind pressure to the body, wind pressure with wide Zone per shoulder and chest (Coldness in winter as well) It will soften.
It is a feeling that transparency is also high, distortion which is particularly anxious can not be felt, even if it was attached at this earlier, it was good.
Screen itself shakes a little PullPull only with Idling, but if you run it, there is no blur and the rigidity is high.
Although it is not cheap, it is convincing if it is molded with the uniform transparency of this large area directly, and devised with a 3rd order surface to ensure rigidity without requiring Sub Frame.
It was in the picture of product introduction "GS" Logo is not in the real thing, seems not to be a sticker attachment. That's a pity.
View detail
Fits: BMW R1250RT, BMW R1250GS, BMW R1250GS Adventure, BMW R1200GS LC Liquid Cooling, BMW R1200GS LC Liquid Cooling, BMW R1200GS LC Adventure water-cooled
I think that it is a good product without Wound.
I got on R1200 GS Adventure 2016 but my height was 170 cm, my arms stretched out, I felt that my arm and body did not go with my handlebar's break angle, but I got Handlebar Up kit attached 27 mm Back, 38 mm Up to Handlebar It became very easy to transfer.
As Handlebar got high, the worried Brake hose felt a little pulled Brake hose when Handlebar was cut all the way to Left, Clutch hose is not as much as Brake hose, but it feels a little pulled. However, I do not cut the Handlebar to the full while driving, so I think Large is durable.
What is disappointing is that there are no choices for imported goods, there are a lot of rubbing scratches that stand out on items.
View detail
Fits: BMW F650GS (08-), BMW F700GS (-16), BMW F800R (-11), BMW F800S, BMW F800R (12-14), BMW F650GS (08-), BMW F700GS (-16), BMW F800R (-11), BMW F800S, BMW F800R (12-14)
I do not run the forest road, but I think that it is necessary also on the ordinary road.
Every time the bicycle parking space is unpaved and everyday Motorcycle comes out, the stones are muddy. Even if you are running on an ordinary road after the rain, mud is still there, and a stone splash is normal. In such conditions, since mud is definitely among the fins of the water cooler, it has always been removed using Small Brush. About 80% of mud bounced by attaching this product prevents entry into Water cooler fins.
Installation seems easy, so it's quite Large strange. Shroud It is easy if you take it off, but if you try to attach it without removing it, you must put your hands from the narrow Duct of SIDE and you have to feel yourself screwed.
View detail
Fits: BMW R1250RT, BMW R1250GS, BMW R1250GS Adventure, BMW R1200GS LC Liquid Cooling, BMW R1200GS LC Liquid Cooling, BMW R1200GS LC Adventure water-cooled
Wonderlich
People who know it is Manufacturer, most products are shaving off, so I think that there is no problem with strength. Depending on the product, but before moving on a bit, Position changes quite a bit, Recommendation can not be made to people with a low height. View detail
A little expensive but this is the place of Camping etc etc. But peace of mind
This Motorcycle gradient is large Lamp Camping place etc etc. , I bought it because it was uneasy to stop at a place where it was not paved.
In fact, I wanted something a little more thick and wanted to get a substitute and slope is eliminated but there is no setting of Lowdown car - - -
Although the price is a bit high, building is also solid and it is possible to stop with confidence.
View detail
Although the fixing position puffed the Axel vainly bad, the degree of a fixing position is known immediately and it gets used immediately usage's start. When the Touring of the high-speed lump of about 400 km of round trips was carried out before usi
Although the fixing position puffed the Axel vainly bad, the degree of a fixing position is known immediately and it gets used immediately usage's start.
When the Touring of the high-speed lump of about 400 km of round trips was carried out before using it, the right hand became painful, but when [ of 400 km of
one way ] it was mostly used for migration on a highway, a hand did not become painful as the intention and it became easy.Although I think that the
price is a little high, I think whether to be good goods.
View detail
Fits: BMW R1200R, BMW R1200RT, BMW R1200RT, BMW R1200R, BMW R1200ST
It completes in attachment easy 5 minutes. A setting face product increases and can stop in comfort. As for one point being worrisome, if the Handle has been Set in the state where took out the Side stands and it stopped, a car body will
It completes in attachment easy 5 minutes.
A setting face product increases and can stop in comfort.
As for one point being worrisome, if the Handle has been
Set in the state where took out the Side stands and it stopped, a car body will shift ahead in a motion of a front wheel, and a Side stands will become
Folded.
The
Handle had set, and it came out, and became that it is likely to push down repeatedly.
Since it got used now [
], it is satisfactory, but only it is dissatisfied.
View detail
Fits: BMW R1200GS, BMW R1200GS, BMW R1200GS Adventure, BMW R1200GS Adventure
Since I wished to bring a Handle to feeling this side, without changing a Position a lot, it is satisfied. The amount of money also has moving width with last thing, and that of the Manufacturer besides was keeping it at arm's length. Although it i
Since I wished to bring a Handle to feeling this side, without changing a Position a lot, it is satisfied.
The amount of money also has moving width with last thing, and that of the Manufacturer besides
was keeping it at arm's length.
Although it is 167 cm in
we height, just this Kit is enough.
View detail
[ -- the Webike Monitor ] -- although BANDIT 1250 of the NAKED was equipped with the Screen (product made from Puig) for post-installation from the first -- the protection-against-wind / rectification effect for Design serious consideration -- unsati
[ -- the Webike Monitor ]
-- although BANDIT 1250 of the NAKED was equipped with the Screen (product made from Puig) for post-installation from the first -- the protection-against-wind / rectification effect for Design serious consideration -- unsatisfactory.
Although various kinds of Spoiler screens were looked for with if more nearly improvable, since the width of the Screen was narrow, the thing of the Type fixed at a right-and-left end seems to be difficult to equip, and it chose this product of the Center mount.
Although it cannot desorb so easily that it is in
introduction Video, there is also a field where it is conversely safer.
Since even a 5-mm hezagonal wrench will come out and adjustment of an angle and height can be simply performed once it attaches [
], it is convenient that it is adjustable according to a run scene.
Although
texture is also highly satisfactory in general, it is had a feeling that the improvement nature in an original aerodynamic field is not a degree which can be felt extremely.
Since
, however fixed improvement are felt, if a Setting will be changed variously from now on and a Best position is found, an effect is felt to a slight degree.
View detail
Fits: BMW F800R, BMW F800R, BMW F800R, BMW F800ST, BMW F800S, BMW F800GT
attachment is also dramatically easy -- DIY -- a tone-deaf one was also satisfactory. As for the impression of appearance, a car body is also stabilized in GOOD. Are they recommended goods? . .
attachment is also dramatically easy -- DIY -- a tone-deaf one was also satisfactory.
As for the impression of appearance, a car body is also stabilized in GOOD.
Are they recommended goods?
.
.
View detail
It is used for BMW-R 1100R. It is found useful very much especially at the time of a highway run. Since the run all over a town is also seldom thought that a throttle locker becomes the obstacle of operation, it always continues attaching.
It is used for BMW-R 1100R.
It is found useful very much especially at the time of a highway run.
Since the run all over a town is also seldom thought that a throttle locker becomes the obstacle of operation, it always continues attaching.
View detail