Reviews
Fits: BMW RnineT, BMW RnineT, BMW K1600 Grand America, BMW K1600B, BMW K1600B, BMW RnineT /5, BMW RnineT Pure, BMW RnineT Scrambler, BMW RnineT Urban G/S
RnineTPosition improvement
Slightly improve Position.
The only thing I was concerned about was the width of the handlebar, so I decided to replace the handlebar to make it even more effective.
View detail
Fits: BMW R1250RT, BMW R1250GS, BMW R1250GS Adventure, BMW R1200GS LC Liquid Cooling, BMW R1200GS LC Liquid Cooling, BMW R1200GS LC Adventure water-cooled
Elbow pain improvement
With the OEM position, there was no room for elbow bending and I had elbow pain after 2 hours of riding. After installing this Handlebar Up kit, it became easier to ride and the pain disappeared.
The brake hose was fine, but the clutch hose was sticking when the handlebar was cut to the right. So, I removed the exterior and took the part of the hose that had room from the base of the clutch to the lever side and fixed it with a tie band. I also shifted the Clutch leverBracket installation slightly inward to make more room for the hose. There may be individual differences in the body of the vehicle.
The installation of the Kit itself is easy, but if the Hose is propped up, the work will be a little more difficult.
View detail
Fits: BMW RnineT Urban G/S, BMW RnineT Pure, BMW RnineT /5, BMW RnineT Scrambler, BMW R12 nineT, BMW RnineT, BMW RnineT, BMW R12
thin
I was surprised that the actual product is so thin, I could never put a Smartphone Holder on it. Installation was easy and adjustment was simple. I am not sure of the effect, but it may have improved the rigidity of the handlebar. There were no problems at all when driving, and it felt easy to operate. View detail
Fits: BMW F850GS, BMW F750GS, BMW F900XR, BMW F900R, BMW RnineT, BMW RnineT Urban G/S, BMW RnineT Scrambler, BMW RnineT Pure, BMW RnineT /5, BMW R12 nineT, BMW R12
It's solid.
It is quite large and sturdy. I bought it because the back of my hands cannot stand the cold when touring in winter. In fact, when I used it, I always had to use the Grip heater, but I was OK with the Grip heater off. Even if I did use it, it was only one step, but it was Large sturdy. View detail
Fits: BMW R18, BMW R18 Classic, BMW R1250RT, BMW R1250RT, BMW R1250GS, BMW R1250GS Adventure, BMW R1200RT, BMW R1200ST, BMW R1200RT, BMW R1200R, BMW RnineT Racer, BMW RnineT Scrambler, BMW RnineT Urban G/S, BMW RnineT, BMW RnineT, BMW S1000XR, BMW S1000XR, BMW R1200R, BMW R1200GS, BMW R1200GS
Handlebar Cover is pampered
However, these are Handlebar Gloves, so they are safe.
I was able to install the GIVI Hand Guard ExtensionEH5108 with no problems.
View detail
Fits: BMW F850GS Adventure, BMW F850GS, BMW S1000XR, BMW F800GS Adventure, BMW F750GS, BMW R1250GS Adventure, BMW R1250GS, BMW F900XR, BMW F900GS Adventure, BMW F900GS, BMW S1000XR, BMW R1200GS LC Liquid Cooling, BMW R1200GS LC Liquid Cooling, BMW R1200GS LC Adventure water-cooled, BMW F800GS
I like it.
I was a little resistant at first, but when I installed it, it was good.
It is quite a favorite.
View detail
Position Improvement
After wearing the shoes, I used to feel pain in my elbow area after running for about 30 minutes, but I was fine, as if the position had become easier.
I have not tried it in Touring yet, but it seems to be effective.
However, there were scuff marks on the surface and the paint was falling off. Quality control is questionable. It is a pity.
View detail
Is this the same thing as RoughAndRoad?
I think it is exactly the same as RoughAndRoad's Throttle locker. Under Product Right THROTTLE ROKER but the letters are exactly the same. View detail
Fits: BMW R1250RT, BMW R1250GS, BMW R1250GS Adventure, BMW R1200GS LC Liquid Cooling, BMW R1200GS LC Liquid Cooling, BMW R1200GS LC Adventure water-cooled
GS standard
This is a GS standard product that rises approximately 30mm in height and 26mm in front of the handlebar. This kit can be set to fit the Japanese human body shape, which is shorter in height and arm length on average than Westerners.
W's products are absolutely perfect in terms of material and component precision.
On the other hand, the instruction manual (MinusPoint star) is a bit of a disappointment. I found an installation video on YouTube that hit the nail on the head, so I referred to that, but if you think that's not enough, you might want to leave the installation to PRO.
View detail
Fits: BMW RnineT, BMW RnineT, BMW K1600 Grand America, BMW K1600B, BMW K1600B, BMW RnineT /5, BMW RnineT Pure, BMW RnineT Scrambler, BMW RnineT Urban G/S
Good for those who want to get up a little more.
Purchased to raise the riding position a little.
Installation isn't hard if you have the right tools.
You should consider how to retain the temporarily removed Handlebar.
Personally, I think a forward lean is necessary for riding posture, and I'm fine with this.
I don't think it will satisfy those who want to wake up their bodies anyway.
View detail
Fits: BMW R1250RT, BMW R1250GS, BMW R1250GS Adventure, BMW R1200GS LC Liquid Cooling, BMW R1200GS LC Liquid Cooling, BMW R1200GS LC Adventure water-cooled
Make riding more comfortable
My motorcycle is a BMW R1250GS. I feel a little tired after riding this bike for a long time, so I bought this Wunderlich handle heightening kit on webike. It can increase the height by 40mm, so that my arms can be bent and longer Time riding will not be so sore, and the overall workmanship is exquisite. I am very satisfied with this shopping. -------------------------------------------------- -------- My motorcycle is BMW R1250GS. I will feel a little tired in this bike for a long time, so I bought this Wunderlich handle high -handed kit on Webike. Time will not be so sour, the overall workmanship is also exquisite, and I am very satisfied with this shopping. Powered by Google Translator View detail
Fits: BMW RnineT, BMW RnineT, BMW RnineT Urban G/S, BMW RnineT Scrambler, BMW RnineT Pure, BMW RnineT /5
Boarding Position is now easier.
With my physique, the OEM Handlebar of the R nineT Pure is wide and forces me to lean forward a bit, but this Handlebar Up kit made it easier. I feel that the height has improved by about 100mm and the front by about 20mm.
The Axel wire is a little tight, but if the Body side is pulled out a little, the Handlebar Lock is still sturdy and large.
(At your own risk.)
View detail
Fits: BMW S1000R, BMW S1000XR, BMW F850GS Adventure, BMW S1000R, BMW S1000XR, BMW F750GS, BMW F850GS, BMW RnineT, BMW F800R, BMW F800GS Adventure, BMW F700GS, BMW F700GS, BMW F800R, BMW S1000R, BMW RnineT, BMW R1200R, BMW R1200GS, BMW F650GS, BMW R1200GS, BMW R1200R
Used for Mirror position adjustment
It was matte and rough, not the smooth look I had imagined from the picture.
It is expensive, but I am happy that I put it on.
View detail
Handlebar Up kit
[How is it used?
Touring
Was the one you received as per Image?
Yes
Was the installation difficult?
Easy
How was your experience with it?
Reduced fatigue to the upper body
[Included Parts:were they on?
No
[Was there anything that disappointed you?
As you can see, the Instruction Manual is all in English.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
I'm not sure the cosmetics are good.
The construction was not good. It is not that bad, but if you are not careful about tightening with PeLePera, it may be deformed during installation. Product Name TRACK DAY." The Image may be used as a lid when Mirror is removed in Circuit, rather than for daily use as in the following example. View detail
It is very easy to grip.
We always use it on our Large Motorcycle. It is less tiring for long distance touring, and it is compatible with the Grip heater! The only thing is that I wish the price was a little lower, but it is good because of its durability. By the way, it does not fit Small Type cars. View detail
We installed a European car to fit the body shape of Japanese people.
Purchase this product because the Position is slightly tilted forward in NORMAL mode. Note that there is an adapter position for installation. Also, it is recommended to use a torque wrench to check the torque of bolt tightening. (Insufficient torque or the order of tightening will cause the bolt to loosen.)
After the installation, the upper body was able to rise and long-distance touring became easier.
View detail
Fits: BMW K1600B, BMW K1600B, BMW K1600GT, BMW K1600GT, BMW K1600GTL, BMW K1600GTL, BMW K1600GT, BMW K1600GTL, BMW R1200RT, BMW R1250RT, BMW R1250RT, BMW R1250RS, BMW R1200RT LC, BMW R1200RS LC
very well & good fit
fast delivery & very fixed parts of R1250Rt. well coated surface & the other part is tightly fixed on Wunderlich adapter. View detail
Fits: BMW F850GS Adventure, BMW F850GS, BMW S1000XR, BMW F800GS Adventure, BMW F750GS, BMW R1250GS Adventure, BMW R1250GS, BMW F900XR, BMW F900GS Adventure, BMW F900GS, BMW S1000XR, BMW R1200GS LC Liquid Cooling, BMW R1200GS LC Liquid Cooling, BMW R1200GS LC Adventure water-cooled, BMW F800GS
I put it on my SUZUKI GIXXER150.
Mounted on a BMWHand Guard Set attached to a Gixxer 150. Handlebar Guard is a good product, but a little less vertical in winter.
On the other hand, the big one doesn't fit the small grained Jixer 150, so I chose this one which is transparent and removable.
This product can be installed in the winter and removed in the summer, and can be worn alone, making it a discreet Handlebar Guard that can be enjoyed in three patterns.
Click here for Handlebar Guard
https://www.webike.net/sd/23463737/
I used Bosch's Bracket to attach it.
https://www.webike.net/sd/1057226/
View detail
Fits: BMW S1000R, BMW S1000R, BMW S1000R, BMW RnineT, BMW RnineT, BMW R1200R, BMW R1200R, BMW R1200GS Adventure, BMW R1200GS Adventure, BMW R1200GS Adventure, BMW R1200GS, BMW R1200GS, BMW R1200GS, BMW G650GS, BMW G650GS, BMW F850GS, BMW F850GS Adventure, BMW F800R, BMW F800R, BMW F800R
CHINAMirror?
It was very bad even though it was a Manufacturer's product called Wonderlich, the mirror was cut all the way around and glaringly.
Anyway, when I installed it and scratched the Engine, the whole Mirror was shaking and I couldn't see it.
So I returned it to OEM Product. It is disposal.
View detail