Reviews
Fits: BMW R1250RT, BMW R1250GS, BMW R1250GS Adventure, BMW R1200GS LC Liquid Cooling, BMW R1200GS LC Liquid Cooling, BMW R1200GS LC Adventure water-cooled
I wish I'd bought it sooner
I'll go ahead and conclude I can recommend it
This product, for me, is the same GSRider, and I'm surprised that there are not more in-play reviews Since it was, I thought I'd review it in a bit of detail
Motive for the purchase
First of all, I'm about 176 cm, 73 kg, and hand length for BUSINESS If we say Shirt, the length of the sleeve length 85-86cm, so-called L Size and With the LLSize specials, the sleeve length/wrist of the Shirt is so short, the longer hand is the better It is
In that sense, I think it's a perfect shape to ride a large motorcycle In the past, Harley, Ultra and other large motorcycles have been I've been riding it for a while now But this BMW R1200GS was only uncomfortable when I first started riding it, but it's been a year and a half After a couple of years, I started to feel the pain of the Elbow and thought about buying it It's something I don't feel when I'm riding SecondMotorcycle's KLX250 After all, I think it is due to the riding position peculiar to R1200GS
Even if you don't think you are aware of it, you can accelerate and decelerate at a reasonable rate, or you can use the Corner When ringing, the fact that you are subconsciously running with both arms stretched out is a sign of fatigue and I realize that it led to Elbow's pain Because of that, I thought this product should be perfect for my body shape, but if it can improve.. I have considered purchasing a I hope this will help those of you who have a similar realization!
Product Quality
A few imprecisions said that the product itself, the appearance of the product was badly scratched... by chance Bingo I don't know if it was, but there is nothing in the appearance of the product that gives me an unpleasant sensation, and the so-called normally Brand new It looked like
I've seen personal blogs, etc., and the special Wonderlich box was up on the blog images But when I opened my purchase, I opened the box for We-Big's mailing and carefully wrapped it with Air cap It was in a certain state Perhaps Mr. We-Big could open the Wonderlich product once and check the product quality and Original packing from "Inspection of the logistics process I wonder if they have a? ...and I imagined that, but I don't know exactly what's going on here on the buyer's side
Anyway, the appearance of the product I purchased was perfectly fine
Installation
No problem at all I think the assembly is within the range of anyone can do it Just to be sure, before you remove the Normal riser, you need to make sure that the center position of the handle itself is off There is no need for Quantity:Pair (for Left and Right) I put masking tape on the part of the handle and the Riser the so-called "Marking and then worked on it
The instruction manual is not readable at all because of the translation (not entered here, but the photos and the tightening Just look at the Torque display and I think anyone can understand it and not worry about it
Actual feel of the car
After installing it, I drove about 250km, but first of all, although it is natural, it is a normal Riding Elbow's bend and leeway is totally different when running in position
Because the acceleration and deceleration and cornering are done from that state, Elbow's room is naturally created and There is no longer a need to support the deceleration weight with both of my protruding hands
This is an improvement that cannot be resolved by individual driving ability alone, but comes from the margin of position I could feel it was effective
I was hesitant because of the high price, but now that my Elbow pain is gone, I bought it sooner I wish I had kept it
If you are considering purchasing this product, I hope this is helpful
View detail
Batch!
S1000R (2017 model year) It was installed to
Parts precision is good and easy to install!
Batch! Parenthesis better!
View detail
Fits: BMW S1000XR, BMW S1000RR, BMW S1000R, BMW C400X, BMW F900R, BMW F900XR, BMW R1200GS LC Adventure water-cooled, BMW R1200GS LC Liquid Cooling, BMW R1250GS, BMW R1250GS Adventure, BMW F850GS, BMW M1000RR, BMW M1000RR, BMW F900GS Adventure, BMW M1000R, BMW F900GS, BMW F850GS Adventure, BMW R1250R, BMW R1250R, BMW R1250RS
perfectly (suited)
It is used in the TFTMeter of R1200GS
It's easy to install because it fits into the meter's outer ring
I recommend it because it's well made and well built
View detail
Fits: BMW R1200GS LC, BMW R1200GS LC, BMW K1600GT, BMW K1600GT, BMW K1600B, BMW K1600B, BMW S1000XR, BMW R1250RT, BMW R1250RT, BMW K1600GT, BMW R1250GS Adventure, BMW R1250GS, BMW R1200RT LC, BMW R1200GS LC Adventure, BMW K1600 Grand America
You will be able to get on your feet a little better
It will be slightly better on your feet
I think I'm leaning forward a bit more
It's cheaper than the seat processing, but
It's not cheap considering the Material
View detail
It's really nice..
I do not need any special tools for installation work, I think that anyone can do as long as 30 minutes. I was worried about the length of Throttle Cable, Clutch Cable, Brake line, but the only thing that needs adjustment is Clutch Cable, which can be easily adjusted without tools, so there is nothing wrong.
It only increases the height by 25 mm, but the wonder and the benefits are Large, the fatigue feeling of Long touring is considerably reduced.
Originally, with the same height as the G310R Handlebar something that Manufacturer sells is questionable itself, you can drive with a natural Position.
The biggest benefit is Large is improvement of Position when standing. Depending on the height of the OEM, depending on the height of the Rider, I am 182 cm, so it was fairly improved that the honest Handlebar was too low and painful.
It will depend on your physique but it is quite a Recommendation.
View detail
Fits: BMW G310GS, BMW G310R, BMW RnineT Scrambler, BMW RnineT Urban G/S
It can also be used for G310GS
Originally it seems to be designed for other car models, but it can also be used for G310GS. It's very easy to install with just two Bolt sandwiching Brake pedal and fixing.
The O3Brake pedal of the G310GS is very small and the installation position is too close to the car body side, so it is tough to keep the feet on the Pedal at all times.
By installing this product, you can extend Pedal to the outside, although it is a little a couple of inches. Although it is only about 1 cm, the effect at the part where it always operates is Large, the burden on the ankle can be reduced to the Large width.
However, since it is not Exclusive Design, the form of Plate is not clearly matched, and a sense of incompatibility on Design remains a little. I do not mind it because it is not a part that I always see.
Also, Material : Even with Aluminum, heavy parts will be attached to the Brake pedal so that the switch of the searre Rear brake will easily react to it. Even if you do not wear Brake, the Stop-lamp lights up just by touching it a little, so you need to be aware of it.
I feel the price is honest and high. I think that it is considered as a Brand fee as a famous Manufacturer, but many similar products are sold, so I think there is considerable room for selection.
View detail
Is useless
I think there are individual differences, but the installation hole Gap, the angle with the vehicle Gap, the included Torx bolt breakage etc. It was the worst. I am planning to purchase Handlebar Up Spacer, but I'm worried. View detail
Fits: BMW S1000R, BMW S1000XR, BMW F850GS Adventure, BMW S1000R, BMW S1000XR, BMW F750GS, BMW F850GS, BMW RnineT, BMW F800R, BMW F800GS Adventure, BMW F700GS, BMW F700GS, BMW F800R, BMW S1000R, BMW RnineT, BMW R1200R, BMW R1200GS, BMW F650GS, BMW R1200GS, BMW R1200R
If you use Original parts
Accuracy as Parts is sufficient, there is no dissatisfaction.
I can not deny that the handlebars are slightly noisy, but it certainly makes it easier to check backwards.
View detail
I would like to create a little Small
If I escaped while leaving the pass road as usual, footpeg arrived on the road before rubbing and both of them were broken.
I do not have cold, so I think that it should be used in use that can not keep the vehicle too much.
View detail
Steady construction!
After all, the wind pressure is hard on the expressway, so if the windshield effect can be obtained even a little, RnineT Urban G / It is good to purchase Short Screen dedicated to S ,,,
My Urban has a Tachometer of OEMOption. With Tachometer it turned out that Bracket could not install due to interference.
Remove Tachometer for the time being (Standard Speedometer only) I installed Screen,
Wes Big's compatible model is correct but in the item description column "Can not be installed on Tachometer car of OEMOption" Please write down.
View detail
Fits: BMW RnineT, BMW RnineT, BMW RnineT Scrambler, BMW RnineT Racer, BMW RnineT Pure, BMW RnineT Urban G/S, BMW RnineT /5, BMW R12 nineT, BMW R12
It looks better, but it is somewhat unwieldy
Do you want ThrottleControl 's function for long hours of highway driving etc?
The so-called Plastic's Throttle assist is cheesy, and there is a feeling of disturbance even if it says anything.
Every time I detach it, I hear the scratches on the Grip, and there are opinions that I can turn it against the other, but it is still an obstacle.
For this product, you will get a satisfying feeling of Large in terms of high quality, appearance and texture.
However, because it was installed in 2018 MODEL, the gap with the ThrottleGrip end got about 5 mm free.
Also, since horizontally opposed two-cylinder Engine uses AxelOff and considerable engine braking will benefit, ingenuity is necessary for locking and releasing. I think that Multi-engine is quite handy.
View detail
Fits: BMW K1600GT, BMW K1600GT, BMW K1600GTL, BMW K1600GTL, BMW K1600GT, BMW K1600GTL
It will not collapse.
As my motorcycle was very heavy at midsummer hot days Asphalt was depressed with a good chance when using Side Stand. After attaching this Side Stand End, it does not collapse at all. However, because the getter is somewhat high, attention is required when the road is a road with a lowered Right and a road with a high Left. There is a danger that Motorcycle will collapse to Right Side. View detail
Fits: BMW RnineT, BMW RnineT, BMW RnineT Pure, BMW RnineT Racer, BMW RnineT Scrambler, BMW RnineT Urban G/S, BMW RnineT /5
Screw interferes
Screw for fixing sticks to the outer edge of the intake entrance, so the exterior interferes and it feels like it can not be installed as the original.
I feel that it looks bad.
View detail
Fits: BMW R1250RT, BMW R1250GS, BMW R1250GS Adventure, BMW R1200GS LC Liquid Cooling, BMW R1200GS LC Liquid Cooling, BMW R1200GS LC Adventure water-cooled
I wonder if it's too high
I installed it in the 13 year model R1200 GS.
The first thing I thought about opening it is scratches all over. is.
Quantity : 1 Set 17000 yen and never being cheap This quality is the worst. Is this overseas made like this?
Although I felt like I installed it, the accuracy was solid, but I do not know what is wrong at the time of designing, but the other side did not match one side.
Many people riding GS seem to feel Handlebar far, so I think that many people bought this product.
I think there are individual differences, I think if Quality would lower the price a bit more.
Those who buy from now are recommended to buy it by dividing it into overseas products.
Posture is much easier after installation.
View detail
Fits: BMW R1250RT, BMW R1250GS, BMW R1250GS Adventure, BMW R1200GS LC Liquid Cooling, BMW R1200GS LC Liquid Cooling, BMW R1200GS LC Adventure water-cooled
Easy chin
NORMAL is not suitable for Small Patterned Person I am comfortable with 165 Front's holding is different from ss by Front load It seems not to be in Motorcycle It seems not to be related so I wonder if I will be familiar with how to handle it View detail
Wind does not come directly to hands.
By attaching this Parts, the wind will not be applied directly to the hand, so the winter riding & high speed cruise will be comfortable. Since I chose Clear color, I am familiar with Motorcycle without breaking Styling. View detail
Fits: BMW R1250RS, BMW R1250R, BMW R1200RS LC water-cooled, BMW R1200R LC water-cooled
Is there a problem with Size?
I bought it to improve the Riding position of R1200R
It's a bit pricey, but it was with Exclusive Design
There is a sense that it can not be helped.
Although the texture of Parts is very good and not directly touchable part
The appearance is also wonderful.
However, in the fitting with the essential Handlebar
There is a gap of Large texture, is it really a vehicle type Exclusive Design?
I doubt it.. There is a gap of about 2 mm
This is Spec. Is it the street?
Sorry indeed!
I want to believe that there is no problem in practical use
View detail
Fits: BMW RnineT, BMW R1250R, BMW R1250GS Adventure, BMW R1200R LC water-cooled, BMW R1200GS LC Liquid Cooling, BMW R1200GS LC Liquid Cooling, BMW R1250GS, BMW R1250RT, BMW R1200RT LC water-cooled, BMW R1250RS, BMW R1200RS LC water-cooled, BMW R1250RT
It is a reliable product to become credible Wonder Rich.
Hand guard installation situation is good, it is definitely a wind blow. It is made to not hit the Cowl neatly. I like the OEM Product and I like it, I will definetly like it! I like it. It is likely to be used for a long time. View detail
10 cm longer than NORMAL
In order to improve Sharp's StandardRear Fender, Parenthesis bad outer Fender,
I bought it. It will be about 10 cm longer. I do not know the effect, but outside Fender
I removed it..
Purchased from Rakuten Week by the convenience of hand-held Point
View detail
Quite effective
Installation is in German, but manuals are attached quite easily if you attach them in the order in the photos. I came running with mounting immediately, but there is quite a windproof effect. Since you can freely change the angle and height, you can position it according to your Motorcycle. View detail