Reviews
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4)
It was a cool decision.
I was hooked with Exactly and Parenthesis was well decided,
I would like to repeat the process again if I find a better product.
View detail
Used with Z1 Cell Motor Cover
I bought the Cell Motor Cover for my Z1 because it did not come with Packing. I bought it because it was less than half the price of Packing from other manufacturers. It was time-consuming to cut the double-sided tape to the width of the Packing and paste it on the Cover. If I used glue, it would be messy if it sticks out, so I stuck it on with double-sided tape, but it would be better if Packing itself had double-sided tape. I wish the packing itself had double-sided tape, but it was a good thing because the price was so low. View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR)
YOSHIMURA style?
I don't know the sound of the YOSHIMURA of the time, and the KZ1000 is a race car, so it It is naturally quieter than "is a racing exclusive parts.
Z1, Z2, and KZ1000 each have obviously different sound quality, but I like the heavy sound of the 1000cc.
On my Motorcycle, the sound was almost the same with or without the Baffle. So, I use the Baffle to reduce vibration.
I think that a Silencer 5,000 yen for a 70mm Short Tube is a good idea to buy it for fun and enjoy it in many ways.
View detail
Perfect
The delivery was very fast, the bag contains all the engine gaskets and they are of very good quality. I am really satisfied with this order. View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR)
Be careful when using OEMTail lens
When we contacted the Manufacturer, we were told that there is no Release for Lens case only, so we are not able to get the Quantity:Set purchased. (OEM inventory is currently unavailable)
It has an internal reflector and a grounding wire (which is not included in most Universal Products), and it is a good product, but the details are not well made. This may be due to individual differences in production lots.
I would like to see at least an insulated Cover on Bullet Type Terminal. It is Large strange to put it in afterwards.
Lens is not similar to OEM.
Reflector is totally different from OEM in structure and reflectivity, only on Lens side and Reflector doesn't pass EURO standard?
Tail appears to be small when seen from a distance, coupled with the slightly darker red color. This image is a little too small.
For these reasons, Lens wanted to use OEM, but it does not match Case.
This is also the case with other Universal Products, where the circumference of the Lens end is one size smaller than that of the OEMLens.
This is a small difference, but when it comes to the circumference of the case, the difference is quite large and does not fit into the groove of the Case.
Lens mounting Screw hole position is also slightly displaced.
I thought that MTEC, which offers many OEM alternatives, might be able to help, but no.
OEMLens not available] I would like it to be indicated as
When using OEMLens, it is necessary to work very hard on the Case side to prepare for rusting by Wound.
Make Lens and Case of the same size as OEM anywhere~.
I think there are quite a few people who are having trouble with OEMCase because of rust and decay.
View detail
Fits: KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000 (air-cooled), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4)
Tachometer Cable50mmLong
I had a hard time deciding between this and the 3 cm long D company, but this was the only one in stock, so I decided to go with this one.
As a result, my Z-chan has Oil cooler (6 steps) and also MeterUp, so 5cm Long was just right.
I had forgotten about this because it is not an item that is rarely attached or detached, but when attaching the upper (meter side) mounting nut, use tape or something to stop it from slipping off. If it falls off, it will be very troublesome.
Especially, the CUB issue is in the cover, and it is very troublesome.
View detail
Brake line grommet
This grommet can actually be universal. I changed the front fender but it doesn't come with the brake line guide. All you need to do is to just drill a 10mm hole to snug it on. View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4)
Fork Seal Stopper SetΦ36
It is comparable to OEM Product and can be used normally.
We'll change it together when we change the fork seal!
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI 750SS MACHIV (H2)
Dust Boots for Fork MRS-955-K021
It seems a little thicker than OEM Product. A little bit expected.
If oil starts leaking, replace it together with the Seal. By that time, it will probably be cracked.
I wish they would make a compatible product that only requires inexpensive packing replacement. Not all of them need to be Rubber.
M is cheap, though.
View detail
My buying experience with Weblike.Japan.
The curved down pipes are what drew me to this exhaust system, they give a flowing look and no mounting bracket at the rear cluttering the view. The overall finish is flawless. The sound takes me straight back to the superbike roar of the seventies. I cant wait for the weather to break and show my blue CB750K5 in the sunshine. I was expecting a 2-3 month wait for arrival but I ordered on 28/12/2022 and the exhaust arrived 16/1/2023 amazing ! Overall a fabulous experience, thank you Webike.Japan. View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4)
Fork Seal Stopper SetΦ36
It is comparable to OEM Product and can be used normally.
If moisture gets into the seal, the seal will rust, so it should be replaced when the fork seal is replaced.
View detail
Inexpensive and good quality
I feel it is less expensive than OEM Parts and the quality is the same.
It is safe to use
View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4)
Emma TEC Chukyo Uncoated for SeatBelt
The Belt part and the steel Bracket part were rusted.
I just replaced it with a Belt from M-TEC Chukyo!
I think it's well made, so that's good!
View detail
Quantity:Pair (for Left and Right) The blurring is different in…
Checking Mirror while driving at high speed, Left Side is [Color] Looks like Clear to me.
Right Side was blurred.
We plan to make adjustments in the future, as the tightness may change.
View detail
M-TEC Antiseismic Mirror
I bought it because it had a good reputation.
It is working fine. Necessary and sufficient. Personally, I think M-TEC Chukyo's products are reliable.
View detail
K0 to K1 Seat Pan: Does it fit K2-K5?
My gf purchased the seat pan for me on her last trip to Japan to save freight back to Australia. I am planning to build a custom seat for a resto-mod CB750 Cafe Racer build, retaining as many original features as I can due to the increasing popularity of this famous bike/model and value. Although I could not get any information on whether this seat pan fits the K2-K5, I thought it looks very very similar and so would take the risk. Having now done a trial fit, here is the conclusion: It fits with three minor modifications: -one of the holes in one of the hinges on right-hand side of the seat needs to be expanded slightly to be able to locate the bolt into the nut welded on the upper side of the seat. The other three bolts fit their respective nuts perfectly -the rear edge may need to be reduced by approx 5mm to provide adequate clearance with the rear mudguard -the seat post needs a completely new mounting position on the seat pan as this does not line up with the K0-K1 mounting position. Easily done with some careful cutting of the cover which is spot welded onto the seat pan and drilling two new holes, plus preferably welding nuts in place. So, it fits with the above minor modifications. Paul View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR)
I'm satisfied
I installed it on an old Short Can and it is quieter and the gauges seem to have stopped shaking and become more stable. View detail
I like the earthquake proofing!
I was using Z2Type Mirror, but it was not for earthquake resistance, so I could not see anything due to vibration while driving.
I purchased MTEC Chukyo's earthquake-proof Mirror this time, and it does not shake at all while driving, and it is easy to check the rearward direction.
I also like the fact that the size can be changed depending on the situation, as there are Short and Long sizes.
View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4)
Ripro after all
If I could, I wanted to re-plating and use the OEM rusted products I had on hand.
Decided it was faster to buy than re-Plating and bought it.
Component accuracy is still not as good as OEMs.
I can correct the bending over here, or make an adjustment bending in the OEM light case.
Plating frame and light unit at the outermost edge of the frame is set to Quantity:The gap on the circumference of the Plating frame in the Set is biased.
View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4)
M-TEC Chukyo Seat without Double Anchor Seat for Belt
The OEM Seat belt was rusted and sagging, so I replaced it with Chukyo's Belt! It looks better and I am satisfied with it. View detail