Reviews
Fits: KAWASAKI Kawasaki Others
I could use it on a regular Blinker.
I have a KDX125, and since the blinker stopped winking, I thought Relay was the cause and replaced it. The model number was different from the one that originally came with it, but the shape and the +− of the terminal were the same, so I used it. I did not modify the terminals or anything, just replaced them. The product said it was an LED, but it worked fine with a regular Blinker. View detail
Blinker replacement for Z1R
Lens of Z1R's Rear blinker only Lens was lost during the run, so Quantity:Pair (for Left and Right) The OEM product is no longer available, so I had to settle for Ripro, but even with Ripro, the product was highly accurate and easy to install. The product arrived earlier than expected and in time for our scheduled touring. View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR)
Be careful when using OEMTail lens
When we contacted the Manufacturer, we were told that there is no Release for Lens case only, so we are not able to get the Quantity:Set purchased. (OEM inventory is currently unavailable)
It has an internal reflector and a grounding wire (which is not included in most Universal Products), and it is a good product, but the details are not well made. This may be due to individual differences in production lots.
I would like to see at least an insulated Cover on Bullet Type Terminal. It is Large strange to put it in afterwards.
Lens is not similar to OEM.
Reflector is totally different from OEM in structure and reflectivity, only on Lens side and Reflector doesn't pass EURO standard?
Tail appears to be small when seen from a distance, coupled with the slightly darker red color. This image is a little too small.
For these reasons, Lens wanted to use OEM, but it does not match Case.
This is also the case with other Universal Products, where the circumference of the Lens end is one size smaller than that of the OEMLens.
This is a small difference, but when it comes to the circumference of the case, the difference is quite large and does not fit into the groove of the Case.
Lens mounting Screw hole position is also slightly displaced.
I thought that MTEC, which offers many OEM alternatives, might be able to help, but no.
OEMLens not available] I would like it to be indicated as
When using OEMLens, it is necessary to work very hard on the Case side to prepare for rusting by Wound.
Make Lens and Case of the same size as OEM anywhere~.
I think there are quite a few people who are having trouble with OEMCase because of rust and decay.
View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4)
Ripro after all
If I could, I wanted to re-plating and use the OEM rusted products I had on hand.
Decided it was faster to buy than re-Plating and bought it.
Component accuracy is still not as good as OEMs.
I can correct the bending over here, or make an adjustment bending in the OEM light case.
Plating frame and light unit at the outermost edge of the frame is set to Quantity:The gap on the circumference of the Plating frame in the Set is biased.
View detail
Fits: KAWASAKI Kawasaki Others
It can be used with 2Pin or 3Pin and responds quickly.
If you have an old car, you can use the Z1 2-pin or CB750Four 3-pin, and if you don't care about the OEM type, the blinker will respond faster than the contact type, which is also good for safety. View detail
Fits: KAWASAKI Kawasaki Others
Very responsive to Linear.
Because of the old motorcycle, the contact type OEM product operates with one-tempo13 delay from the switch operation, but this product operates linearly, which is good for safety if you are not concerned about OEM. View detail
Fits: KAWASAKI Kawasaki Others
I can use it without problems
It's a little bit old motorcycle, so it doesn't light up immediately after pressing the switch, and there is a time lag. The price is not too high and it seems to be reliable, so I chose it. View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR)
I know it's cheap, but...
It is cheap, and the quality of Plating is better than P Corp.
The only thing I can say about RiproManufacturer's Blinker Bracket in general is that why can't they make the with Bracket umbrella spread to the OEM shape?
I guess it's RiproManufacturer that says you can't go beyond OEM.
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR)
Save more than OEM
This Quantity:80% of the set will still be available as OEM parts, but 4 pieces of 2 types of RubberDamper from Headlight side will be discontinued.:I compared it with OEM Parts and there seems to be no problem. View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR)
On the Base of Smoked lens
Dye the Lens Black. [Color] I used it for Base to process Smoke.
The price of OEM Lens has also skyrocketed. With this Lens, in case [Color] Even if the Smoke process fails. (Even if it's dyed too Black) I don't think I have that much mental Damage.
View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4)
Suitable for Processing Base
The Number mounting part has been processed so that the Number can be mounted lying down. It is the best for processing Base. View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4)
pleasant feeling
LargeHumanly, I became a Parenthesis. View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4)
z Tail lens
I bought this for OEMLens storage.
I am satisfied with the cost performance.
Can you recommend a product?
View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4)
Are you sure?
Replacement for Red Cover
The bulb is transparent, so it doesn't glow red, of course.
I don't know.
I wonder if it'll pass inspection.
Maybe I'll make the bulb red.
And then NumberRed glows.
Let's process it.
View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4)
Large satisfied because it was installed without any processing
BONNEVILLET100 (2008) I bought it to install the CIBIECL1 on my car, because the OEM inner rim has a folded inside and cannot be attached with a pimp, so I bought it to see if it could be attached with the Kawasaki Z Light. The outer rim is about 2? wide. (length) The inner diameter of PFP Stanley inner rim is not suitable for CL1. By the way, the inner diameter of the PFP Stanley inner rim does not fit the CL1 because the CL1 is about 1.5mm larger than the CL1, so the outer glass will break if it is forced to fit. This Headlight Rim Set is the best way to install CL1. If you use the inner rim of CL2, it will probably be a gold one. (In the case of BONNEVILLE.) The screw that holds the retainer and inner rim must not be overtightened. You need to be careful not to over tighten the screw that stops the retainer and inner rim. It was the right decision to buy it. View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4)
OEM same etc.
It's true that Light Bracket is no longer available at Kawasaki OEM Parts This Light Bracket, although there is no choice but to rely on the Reproduct The quality of the platings is perfect View detail
Fits: KAWASAKI KZ750, KAWASAKI KZ1000, KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI KZ750, KAWASAKI KZ1000, KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR)
Well, if we can just break it up
The OEM was damaged and I had no choice but to replace it
The inside is cheap and light in weight, unlike the OEMs, and PackingRubber is also cheap 〜Yes
Well, since it's this price, I think it's possible to divide it up as a matter of course
View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4)
Precise
It's pretty well done with precision
I purchased this as a replacement due to a fall
If possible, I would like to sell more single bodies
View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4)
Products as I expected
It was a product as I thought. There is no problem with accuracy or quality.
It was cool if I put it on the car body exactly as I was doing it.
Cospa was good without a problem in price.
View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4)
I am thankful to have Lens only in Single Item.
Because I was Sale purchase.
Even compared with OEM there is no big difference there.
I think that a place that can be purchased with Lens only is also good.
It is a product that seems to try to purchase again as Stock.
View detail