Reviews
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4)
not very soft
The same type of Grip was used for more than 20 years in KIJIMA
As soon as it arrived, I held it in my hand 'Ale,' It's not soft at all, it's just that the original was softer
The thickness of the rubber is thinner than the KIJIMA's. The grip is also thinner than the KIJIMA's
My motorcycle has a Separate handle, so it takes some of the strain off my hands I bought it because I thought it would be less, and I was disappointed
I thought about changing to the soft type, but it was too much trouble, so I decided not to
View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4)
Choosing an adhesive
The product is perfect It has a soft Grip that bites into the Gloves with good bite and a light grip
Since the Grip is made of Ethylene propylene rubber General Grip bond cannot be used for adhesion
Cemedine's SUPERXHYPERWide, a polyethylene We were able to adhere firmly with polypropylene bond
View detail
Resistant to vibrations?
Is it resistant to vibration? It's a little wild
The Mirror doesn't blur due to vibration, so visibility is good I think it is necessary for safe driving
View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4)
Personally, I prefer the Hard Type
The Motorcycle Store The softer the Grip is, the better your hands won't get sore after a long day of driving I bought it on the recommendation of the company I'm a novice, but it took me about an hour to install it while following the service manual It is indeed soft But it is too soft, so when I push the car body after getting off, the grip strength of the grip is not good The slenderness of the Handlebar is directly transmitted to the hand, making it difficult to apply force If the Handlebar Grip is stiff, your hands may hurt after long hours of driving The Grip is thicker, so when you push the car body, you can push it with more force It's easy to put the In the end, it's a one-size-fits-all proposition I rarely ride for long periods of time, and it's more convenient for me to get off and then push the body of the car with more force So the Hard Type was right View detail
Large changeable satisfaction
It is used for CB1100RS. It was said that Z2 Mirror is blurred, but it is not blurred at all! The end is also changed to an external end, so it doesn't shake even though the vibration is increased! No shaking! View detail
I bought it from Z's Restore store, Recommendation
There are a variety of Mirrors named Z?Mirror in a similar price range It was from the Manufacturer and after struggling to decide which one to buy, the Restore store When I consulted with mrs When I installed it and test rode it, I couldn't see the back of the OEM Mirror because of the vibration, but this After changing to this product, it was improved to Large width The Short Bracket is also attached with this product, and it is also attractive that it can be easily replaced by your favorite I'm happy with it, Large and strange
However, one thing I would like to see improved is a new feature near the Center of the part of Mirror that looks like a bun This is where the alphanumeric characters are engraved on the If you don't look closely, you won't be able to understand the Level, but for those who are particular about the design of the OEM, this is the Level I think that's the part that bothers me But it bothered me at first, too, but I got used to it quickly
View detail
In Z system, it does not blur much
The previous Mirror is 60 km / Since it was in a state that it was impossible to check the backward with vibration, as I saw the other imprints, the product was vibratory countermeasure and it was a good texture so I bought it again.
Impre street, if you compare with the previous Mirror you can see the mescher (* 'Ω `*)
I was glad I could purchase good ones.
View detail
Fits: KAWASAKI ZEPHYR750, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR400
Thailand is Small
Thailand is Small.
When I checked it when I felt something wrong with Throttle while driving, Thailand was out of carburetor.
Thailand is Small so Thailand Ko is playing in the place fixing the Thailand co on the carburetor side and its part has been deformed.
It is about 1 mm in dimension. I think that it is a large error for such industrial products.
Although it became slightly concerned at the time of installation, I felt that Large was durable
View detail
After all the stamp is ...
I knew that there was an uncracked stamp on the Body of Black Type when I saw the picture on Net, but I ordered it because I did not find a picture of Plating type, but after all I am sorry to have it firmly. (Also this is so badly prominent, why do you print on such a place ??)
Earthquake resistant (Reduction of blurring) , I did not feel the big difference as compared with other companies' ZMirror. (Also, using Short Bracket was almost the same as Tanax's AZ mirror. Bracket is thicker though. )
It may be a matter of compatibility with my Motorcycle, but I think that it is better not to make excessive expectations. (It is quite wonderful that there are many imprints of relatively high evaluation)
View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4)
Product that does not impair the atmosphere of the car model and has superior performance.
Design damaging the atmosphere of the car design, not too soft, not too soft, just a good feeling. It is durable and can be used for a long time. This is Recommendation. View detail
I bought it because OEM brand new items are not available
The quality of Plating one more - - -
There are many BALI of the hole through the Wiring - - - Is it OEM?.
We took BALI taking by Leutor and used it.
I do not even write 60 letters - - -
View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4)
OEM same etc.
I exchanged from the external power lever to Oever Type Lever.
Although I was worried about the pulling of Wire, I was worried, but there is nothing wrong with the extent that it says it got somewhat heavy. The shape is also SMART, OEM Type personally likes.
View detail
I approached my favorite Naked-style!
My BALIUS had a square Mirror from the time I purchased it in second hand, but I like this circle Mirror so I attached this Mirror.
I like the Z type as well!
Visibility drops again when compared with square Mirror, and slightly shakes.
It is emphasis on appearance and I am cheap in Mirror so I do not care so much!
View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4)
I am satisfied..
Used for W1. It was softer than imagined, it was the correct answer by choosing stiffness. The feeling of excitement and thick hand grip feeling when opening Axel match. View detail
Maintenance&Custom
Clutch wire cable has grown, so change to Stainless mesh type including other Wire cables! Because the total length is also released with small increments, it is quite saved. It was disgusting because it would not be easy to look good, it is best to choose the best Length!
View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4)
Touring's fatigue halved
I tried replacing it from those at that time. Tiredness is completely different. It is still worth changing people who are using those things at the time. I think that it does not concern OEM. Because the fatigue is different from those at that time Cha Chi Chi! View detail
No blur!
Purchase by watching other people 's impressions.
I was using a Mirror made by another company, but I was giving up on blur about this. I changed it to Mirror here, it is only saying that vibration countermeasure is done and there is little blur. It will not change from now.
View detail
Fits: KAWASAKI ZEPHYR750, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR400
It is attached to ZEPHYR 400 χ.
The Thailand near the Clutch lever side was hanging out, so I thought I'd still have it, but I purchased it for an early exchange.
I asked Length with STD but it was about 1 cm longer than OEM. Since it is about 1 cm, the installation itself can be done without problems, but there may be individual differences, but it may be better to purchase thinking that it will take a little longer.
The color of the resin is attached to the Thailand part of the Clutch lever side and it seems good for lubrication and part labor.
From installation to use is ★ 5
Life is important for such expendable items, so afterwards it is ★ 4 after trying it.
View detail
Classic Custom
It was surprisingly difficult to install, but it is a Parts I want to hold down ~. Handlebar I changed it when I changed it is ordered by Cable length, but if it is possible to display NORMAL how many mm long it is displayed, how many mm of Outer, how many mm of Inner is displayed will be saved. How many times I asked the person in charge ___ ___ ___ 0. The correspondence of the person in charge was good!
View detail
Earthquake-resistant measures already!
Anti-earthquake measures already, this word is fake!
I also use Handlebar Weight,
It was improved considerably.
With comfortable UP, Touring will be more fun.
(*^. ^*)
View detail