Reviews
Wow, that's expensive!
The product is great, but not quintessentially expensive. View detail
Custom
I have not installed it yet, but I am satisfied with the product. View detail
For brembo CORSA Corta MASTER
Installed on brembo CORSA Corta.
Looks.Material, good! (^^)
View detail
very good product
About quality and texture : very good About the feeling of use : very good Difficulty of installation : not difficult About shipping and packaging :very good and fast View detail
Pricey, but...
I unexpectedly decided to get a brembo MASTER and looked for a Handlebar Clamp to put Mirror on it.
POSH and other compatible products are available at a lower price than OEM, but it is hard to throw away OEM products that claim bremboMark....
In the end, we chose and installed the OEM, although it was more expensive due to the color and the fact that it was OEM for peace of mind.
When I put it on, the coloring is the same as the MASTERBody, so the sense of unity is different.
I think the compatible products are different colors, so they won't look so integrated. I think.
The price is high for such a tiny component, so there must be some conflict in that area. I think so.
View detail
The Goodness of OEM
I like the look and fit of the fit that comes from OEM.
I'm pretty happy with it, but I think it could be a little cheaper.
View detail
High price, but quality is first class
Since I changed the MASTER of MONKEY125 to RCS and the Clutch holder to Koken, I bought this to make the Handlebar area simple.
The quality of the car is perfect, and as it's a brembo OEM, it fits perfectly.
However, because the screw allowance is a little short, if you use the Mirror of MONKEYOEM, it will bottom out on the Mounting Bolt of Holder as it is.
I installed a 5mm aluminum spacer in it.
The problem with the most Large is the price! It's expensive!
Quantity:Pair (for Left and Right) If you put them together, it will be over 10,000.
Well, it is not a part that needs to be replaced regularly, and it becomes indispensable to give a sense of unity with MASTERetc., so I recommend it to those who can divide it as a necessary expense.
View detail
I installed it on my ZrX1200 DAEG.
If it was a little cheaper, it would be 100 points. View detail
brembo Mirror Bar Handlebar Clamp RCS
Brembo masterFor Handlebar.Mirror Clamp for RCS is sold separately as for Right and for Left, but Quantity:Pair (for Left and Right) Subject. View detail
That's it for Mirror on NAKED!
Since both the brake lever and clutch lever have been changed to brembo
Since it is NAKED, I replaced it to prevent Handle mirror.
The tint with the Lever is perfect since it's brembo OEM!
View detail
Material is solid.
Required if you want to install the Mirror on the brembo Master CylinderClamp.
The price of the clamp alone is very high, so I'm looking at other brand products, but if you're looking for materials and precision, the brembo OEM is definitely the way to go.
There are products like Posh and Craftman in Aluminum cutting, but it doesn't matter anymore if the color doesn't match up with MASTER or not, the Material and treatment used is clearly different.
If you're going to use the brembo MASTER, I felt it would be a shame to lose some of the rigidity in this area.
View detail
It looks good. But I'm a little tired of the bullish pricing.
Handle mirror & Handlebar area is unified to brembo.
Changes.
Mirror:Cowl mirror ⇒ Handle mirroring
Replacement/Additional parts.
Using Z800Handle mirror
・brembo MirrorHandlebar clamp
・SUSSpacer D14.0mm, t2.0mm
The Ninja1000SXCowl mirror is transformed into a Z800 OEMHandle mirror for a cleaner look.
The Mirror on the market is excellent in terms of design, but it is undeniable that the mirror surface may shake at high speed driving. Since there are concerns about the strength of the product, the OEM product with a proven track record of reliability is the one to choose.
In the case of OEM products, the basic M10 handle mirror is still able to be installed.
In order to avoid the blurring of the mirror surface, the Handle mirror of the aerodynamic type is chosen, and although it will be chosen from the Mirror of Z series, it became Z800 by a process of elimination to avoid the interference with the Wind Screen and to be compact in the direction of the width of the car.
The price is also very reasonable for 1pc, probably because it is made in Thailand.. It was the cheapest at about $5,000.
The installation should only install Mirror after clamping to Handlebar, but it does not seem to be attached as it is.
Because the length of the screws is too short for the brembo, it will hit the upper bolt which clamps when you try to tighten it to the end.
It's hard to get a spacer for M10 because the size of about 14mm OD doesn't exist in general. I managed to find an existing product and bought 2 types of t2.0mm and t3.0mm by insurance.
The result was Large sturdy at t2.0mm.
I bought it on the spur of the moment when it was on Sale, but I think brembo's Holder is too expensive for Quality (lol).
View detail
MirrorHandlebar clamp broke
Since the reflection of Right Side Mirror was strange while driving on expressway, it touched Mirror. Looking closely, Clamp was broken. KATANA is a Motorcycle with low vibration, but it is not clear that Clamp breaks. Vibration of KATANA. The front wheel Brake is RadialPump of brembo, but Clamp was using Universal Product.
Change to brembo this time. The reason for choosing is that the Body color is the same, the thickness of the Clamp part is thick and it seems to be strong. Neck is expensive. As for quality, bremboMark is also included and it is a satisfactory thing.
View detail
BremboMark is good
I bought it when I bought bremboRCSRadial master. MASTERBody has no place to attach Mirror, so it was OK even if this was not the case, brembo's Mark liked it! View detail
One point mark is good!
One point mark is good!
It is self-satisfying Parts, but as it is always a visible part, satisfaction is high ♪
If you are a bit cheap, ☆ X5!
View detail
Even though it's a Mirror Clamp - - -
I used it for KSR 2
Mirror can not be installed in Standard Clamp
I bought this
To be honest I think it is quite expensive ^ ^;
View detail
Even appearance and texture ◎
I thought about attaching a Conversion Adapter when exchanging Mirror,
I want to finish it like OEM and Brake is also brembo,
You can also produce a slight sense of fashion.
View detail
I think just for a moment that it is items which can never be removed if a price is appearance serious consideration although it is stretched. It is somewhat cheaper than a craftsman.
I think just for a moment that it is items which can never be removed if a price is appearance serious consideration although it is stretched.
It is somewhat cheaper than a craftsman.
View detail