Reviews
Too bad about the color of Nut.
Purchased because the diameter of the Nipple no longer fit in the MASTER replacement.
Same shape as 10ROEM but OEM is 8mm diameter with domestic Spec. and this is 7mm diameter with RCS Nipple.
I thought they were the same except for the diameter, but the fixed nut on the lid is silver while the OEM's is black.
It's a fewmm of Nut, but it's a shame that it looks like it's floating when I wanted to create a unified look with Black.
I tried to replace it, but it is fitted like a ring of wisdom and cannot be removed.
View detail
functional beauty
I bought these to go with brembo's Brake master and they look great.
It seems to be larger than I expected, but the amount of Fluid is nice and easy to see.
View detail
KATANAFront brake replacement
The tank itself is good, but the bracket is not well made or looks good, so I ended up buying an additional antilion bracket. View detail
Used on XJR1300C Rear master
[How is it used?
It was used for the Cup of Rear master of the main vehicle, XJR1300C.
The OEM Master cup is in the Right Side Side cover ... very poor serviceability!
So I decided to relocate the Master cup, and since the OEM Master cup is huge
SMART. [Color] I changed to Smoke brembo oil tank, and MASTER is also brembo.
The footpeg introduces Over's Rear Sets and the MASTER's installation Bolt.
We changed to a slightly longer one, put a Bracket over it, and fixed the Master cup.
The bracket used was a Master cupBracket from Universal Product, and the oil hose was a hose from bremboOEM.
The part number of the oil hose is Item number:B-002-10 It is
Was the one you received as per Image?
Image Street [Color] It was Smoke condition.
Or rather, the front brake and clutch master also have brembo's [Color] I'm putting Smoke in it.
We knew what it would be like.
Was the installation difficult?
It is not particularly difficult, but it is always a good idea to bleed the air out of the oil hose when it is replaced.
If you do it pretty well, you may not need to bleed the air, but I did it for Fluid replacement as well.
I changed to Wiring because the OEM hose clip is so hard to get.
I think it is safe to buy Clip as well if you are interested.
How was your experience with it?
Anyway, it's good because it's easier to maintain.
If it is XJR's OEMRearBraking system, this size is fine.
You can say good-bye to the big, stupid cups of the OEMs.
[Included Parts:were they on?
None. As shown in the product image.
[Was there anything that disappointed you?
None! The angle of the outlet is perfect and easy to use.
View detail
Used for Front brake
[How is it used?
I used it on MainMotorcycle's XJR1300. 19RCS from brembo is used for the brake master cylinder.
Was the one you received as per Image?
[Color] The density of Smoke was also as per Image. Green Light seems to be a good match.
trendy [Color] We installed this product because we wanted to SmokeTank.
Oil Tank S50's [Color] I used to use Clear. [Color] The Handlebar area clearly looks tighter in Smoke, which is a good design.
Was the installation difficult?
It is very easy because all you have to do is replace the tank.
The oil hose connecting the tank to the Master Cylinder must be replaced.
If done well, no troublesome air venting is required.
How was your experience with it?
The handlebar area is black, so the oil tank is also black. [Color] It's nice to be Smoke.
However, it has become difficult to see the discoloration and deterioration of the Oil. This is unavoidable.
It is recommended that they be checked or replaced frequently.
[Included Parts:were they on?
No, as you can see in the photo. There is no mounting rubber, so it should be transplanted.
This mounting is tricky because it is not sold as a rubberSingle Item.
I have also purchased a new Bracket and introduced PLOT's Black stay.
Wow, PLOT's Bracket Kit included mounting rubber!
PLOT is recommended as it is not included with the Kohken Kit.
[Was there anything that disappointed you?
I chose this one because I want to stick to brembo, and I have bremboMark on my Cap.
If you want to stick to it, by all means!
View detail
[Color] SmokeTank is a nice touch.
[How is it used?
Clutch is brembo RCS19.
The vehicle is mainly for Touring and city use.
Was the one you received as per Image?
Image Street [Color] The Fluid is Endless Fluid.
Endless's Brake fluid is clear and colorless. [Color] Even through Smoke, you can see that it contains transparent Fluid.
Even with Color Fluid, you can still see the color if it is Blue or Green Light type, so you can make the most of it.
But, [Color] Smoke, so Red colored Fluid may be subtle.
Was the installation difficult?
The tank itself is not difficult to install. However, air venting is required, so please be careful.
This time, I also replaced the oil hose connecting the tank and MASTER with a new one, so I put Fluid in the tank, bleed air out with the MASTER bleeder, and finally replaced the oil from the clutch release side to complete the process.
How was your experience with it?
The handlebar area is now unified in black, so it looks very nice and tight.
But, [Color] Since it is a SmokeTank, it is of course harder to visually see Fluid contamination.
In particular, XJR's clutch fluid is prone to contamination, so frequent checks are essential.
[Included Parts:were they on?
No. Cap and Diaphragm are of course included.
[Was there anything that disappointed you?
Not about the product, but I bought a Hose connection with a Straight angle, but I'm not sure if it's the right one.
If you are using a Brembo radial master on your Pipe Handlebar, the 15° angled tank is recommended.
Straight, depending on the Bracket (this time I used a PLOT Bracket), the MASTER side may be overloaded.
View detail
A fad? BlackTank of the
[How is it used?
Used on brembo RCSMASTER lever. Koken's Quantity:I purchased a Set.
Fluid TankQuantity in Black:I was in no hurry to find Set...I purchased it separately.
(Later that Quantity:Set found.)
Was the one you received as per Image?
Street Image
Was the installation difficult?
Assembly is easy, but I will ask my trusted Shop for Fluid replacement.
How was your experience with it?
After vehicle installation.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
View detail
It was easy to get there.
I bought this to replace my RadialPump with a brembo.
Fitting was not a problem either.
There was no interference with the Cowl and I had to adjust the Hose by cutting it a little.
View detail
exchange
It is changed together with the replacement of brembo brake.
The bremboLogo on the top, the [Color] I like the Smoke and it looks great.
View detail
Whenever I replace the Master Cylinder Here. I'll use
I installed Nisshin's Radial master.
The oil tank that comes with the NisshinMASTER is too large and gets in the way, so I decided to use this tank and installed it.
You don't need Large Threshold Tank as Brake fluid is not reducible to begin with. The bremboMark is the best for Tank cap and the price is cheap.
The only drawback is that the S15Tank has only two options for the oil exit, one right below the tank and one at an angle. It would be even better if there was one from right next to it.
When installing, a cap is fitted at the oil outlet.
Do not forget to remove it.
View detail
it's cheap for a brembo, but it requires a lot of work
To introduce YZF-R1's Semi-radial master to R25, we have to do as much as possible to I wanted a small reservoir tank and bought a brembo one because I wanted a MASTER one The brembo is a Yamaha OEM brembo, and Caliper is also a brembo Semi- neck is a cowl or interference, but this one is the one to handle You can clear it But this reservoir tank can't open and close the lid stopper or easily Since there are no screws or other loss prevention measures, we have created a new opening and closing guard that can be co-tightened View detail
It's a little expensive, but it's easy to feel like a custom
It's just a container that can hold the Brake and Clutch Fluid, but it's in sight when you ride it So it's easy to feel the satisfaction of customization View detail
Authentic Brembo product
Works as advertised, nothing fancy. Looks better than the regular translucent white reservoir. Inexpensive and great quality, highly recommended. View detail
Authentic Brembo product
Works as advertised, nothing fancy. Looks better than the regular translucent white reservoir. Inexpensive and great quality, highly recommended. View detail
Texture is unquestionable
It is now in fashion, I was impressed with the past, I thought that I could not put on my Motorcycle and I stepped on my foot.
Texture is unquestionable, since I wanted to unify as much as possible around Handlebar, I got it as Image.
View detail
I will not mistake it
Since the condition attached to the used car was not good due to aged deterioration
Purchase for replacement.
Together with bremboOEMHose and Clip.
Because it is an OEM itself
Easy to exchange, only bleeding on the Lever side, it was a dozens of minutes work.
It looks like it is now
Excellent for COSPA.
View detail
The feeling I saw is nice
For Mother who had become accustomed to the conventional White Resin Cup for 20 years, this Material and color was a shock.
Because it is not elastic compared with conventional Material, weather resistance and Ethylene Glycol (Fluid) It is a place I do not know what the durability against.
Manufacturer will also make things thought if it seems to lack durability.
View detail
A transparent smoke Reserver tank that has never been.
It was 30 years ago that I saw the Reserver tank separately for the first time. The white container of Polypropylene which is the same material as the Radiator's Reserver tank. I felt the beauty in that. Motorcycle called H2 from Kawasaki was released to the world, and Smoke's Reserver tank. I was shocked by the transparent Tank. View detail
Is beautiful
I use it as Reserver tank of Brake master of accossato.
I used cheap Chinese-made Tank so far, but since Fluid was bleeding or it became cloudy early, I decided to exchange it for something neat.
At first I thought about attaching Kawasaki's OEM Parts Number, but accossato has the same Hose diameter as brembo, so this one is selected.
Make making is fairly solid and it is beautiful. However, the hole for fixation was Large, it was possible to finish with Bolt of M8 at last using Rubber Bush and Spacer which was rolling in the tool box.
Probably because it thinks that the former hole is about 12 mm, ingenuity is necessary for installation.
View detail
Refreshing around Handlebar!
I purchased it at the same time as brembo RCSRadial master! I do not enter much amount of Oil, but I wanted to refresh around Handlebar and I am very happy. Cap's bremboMark also makes me feel bad when driving, is Nice ^ _ ^ View detail