Reviews
OK as long as you don't crack it.
The Tank on the Front. [Color] The rear was replaced with Smoke, so the Rear was also added. The mounting holes are M6.
As long as the Hose is routed so that it is not subjected to strange Tension, the Bracket is simple and Large sturdy.
We had seen many cases of cracking with Reserver tanks from other companies, and we chose brembo because we didn't want to be a bit uncomfortable with it.
I hope the resin will not crack due to vibration, etc.
View detail
Ordinary Tank
[How is it used?
For collecting Parts in Rose.
Was the one you received as per Image?
Yes
Was the installation difficult?
No, sir.
However, you must be able to do the hose connection work.
How was your experience with it?
usually
[Included Parts:were they on?
No
[Was there anything that disappointed you?
None
View detail
Small, no leakage.
[How is it used?
Because I collected parts at Rose and Tank.
Was the one you received as per Image?
Yes
Was the installation difficult?
No, sir.
How was your experience with it?
usually
[Included Parts:were they on?
No
[Was there anything that disappointed you?
No
View detail
RGV250Γ (VJ22) It was good to choose Rear ♪
I used Rear brake in Hard for Circuit and Fluid was oozing out from Hose at the base of OEMMaster cup, so I decided to replace it. I dislike OEM's square shape, I thought that Master cup should be round.
I was saved because I was referring to Impression here, so I will share it ♪
? Large Kirishima for Exactly to for Rear
Be careful not to forget to take protective cap of Hose mouth before installation
? The container is transparent, so the contents can be seen and it is very easy to maintain.
? Boots is also fulfilling functionality with neat Parts
? The top cover's Black Cap is tightened securely.
? Texture is somewhat cheap feeling, but Material is aged "Pakit!" It was seen as a Material that does not become.
Replenishment at the time of bleeding is not enough to replenish that much Large change enough capacity.
There is no instruction manual.
The final decisive factor is "Brembo" It was Brand.
It is a cheap texture, I think this is the intention of Manufacturer.
Because it is cheap, regularly buy replacement demand arousing ? ? ? ?
Since Manufacturer is responsible for releasing it as a product as a product, so it is okay to rest assured.
View detail
Outlet is on the bottom side subtle - - -
Since the Hose insertion port on the MASTER side is landscape, considering the curvature of Hose, the position of Tank surely becomes high.
I will replace it in Tank of the side takeout opening.
View detail
I replaced it for Tank for H2
Purchased from OEM's Nisshin Radial Pump master cylinder with 19RCSBrake master with replacement.
OEMHose will be 8 mm and brembo will be 6 mm so Fluid Tank will also have for Brembo.
Of course Hose also bought a 6 mm mesh type.
Installation finished smoothly and smoothly, especially no problem.
However - - - Is this Design somehow!
I guess there is no difference as much as honest Tank cap !?
Hose It seems to be repurchased because the diameter does not match - - -
After all I never got lucky with NisshinTank and there was no change, so I ordered Kawasaki H2's Brake fluid tank and exchanged it.
Www that this person feels Custom
View detail
[Webike Monitor] Since the Diaphragm was changing at the time of exchange of Clutch oil, since the Tank was satisfactory, when there were this [ exchange and / this ] by sale of only a Diaphragm, they were kind.
[Webike Monitor] Since the Diaphragm was changing at the time of exchange of
Clutch oil, since the Tank was satisfactory, when there were this [ exchange and / this ] by sale of only a Diaphragm, they were kind.
View detail
"Although there is no dramatic change in particular since it is a tank... It was equipped to the rear of KDX125, but outlet is shorter and thinner than genuine. I should have bought it after measuring. If it binds with a cable tie firmly, it can be used s
"Although there is no dramatic change in particular since it is a tank... It was equipped to the rear of KDX125, but outlet is shorter and thinner than genuine. I should have bought it after measuring. If it binds with a cable tie firmly, it can be used satisfactorily." View detail
It was a size exactly good for the radial brake master of a brembo. incidentally -- stay -- antlion Reserver tank stay Brembo racing Radial brake master it is .
It was a size exactly good for the radial brake master of a brembo.
incidentally -- stay -- antlion Reserver tank stay Brembo racing Radial brake master it is .
View detail