Reviews
It was a little Smallish.
I purchased the Z125PRO and needed a Cover.
Fortunately, we were able to place it under the roof, so we searched for an inexpensive product that would fit a vehicle with a top case, and we found this product.
As for the product, it is a thin item with no lining since it is a 2,500 yen item, as a matter of course. However, although it is thin, the fabric feels firm, and so far there has been no water seepage. There are no seams to worry about either. There are also holes to put U-locks, etc. through, a strap at the bottom of the center, a rubber strap under the front wheel, and an adjustable strap at the bottom of the rear wheel for tightening. I don't know how long it will last before it starts to deteriorate, but I think it is a well-made product for the price.
Unfortunately, the top case was too large, or maybe it was because the rear carrier was raised, but it was a little short and did not cover the lower part of the car body. Although it could be placed under the roof for the time being, there was no depth under the roof, so the rear part of the car body was exposed to rain. Nevertheless, there is too much space below from the center to the rear wheels, which would allow rainwater to enter the carriers as it bounces off the ground.
It is a decent and cosmetic product for the price, but those who are looking for high Level durability and protection from water and dust may want to make another choice.
I regret that the size was too small. Because I have no choice, I think I will buy TYPE2 which is One sizeLarge.
View detail
To the last (Urgent) tool
It is not easy to use and is not good for emergency use. View detail
Touring essentials
I think it is a necessity for long touring, etc.
The hand fatigue after touring is completely different with and without this.
I have put this on all my cars in the past.
I can no longer go Touring without it.
I recommended it to my wife and she was delighted.
View detail
It works.
It dries out damp interiors quite quickly. It also works well for odors. It eliminates unpleasant smells. Considering the price, the effect is sufficient. View detail
Mold prevention? Purchased for
Purchased for Helmet used during summer and rainy weather, as it is said to absorb sweat and moisture.
Helmets that are not used very often are prone to Mold and could be used for storage.
I used it on a Helmet that I used in wet weather, and as expected, the areas where the Silica clinker could not reach remained wet.
However, the area in contact with SilicaClean was dry.
I would like to expect Mold prevention effect.
View detail
Short Maybe too short for lever.
Installed on the short lever of NisshinHorizontal TypeMaster Cylinder.
The fit is a little worse with the short lever.
However, I don't mind using it because it doesn't make me gap.
It is functional.
View detail
In 1Season, the windproof material on the surface was shattered by ParaPara dust!
This Shirt was my favorite because it was warm, slippery, and thin, but I used it last winter, washed it, and stored it.
I took it out for an early morning course run in early autumn, but the windproof material on the surface was shattered into ParaPara, making it sticky and unusable.
It's a shame
View detail
I couldn't get into the GSX-S125 Plug from the side.
I thought that I would use it for the removal of the Plug of GSX-S125, and purchased it, but I thought that I could remove the Shroud and enter from the side, but it was no good. It is the selection mistake here. View detail
for use at home
Purchased to park for Vehicle on the road.
I've only used it a few times, but so far no durability issues.
View detail
I'm trying to get my hopes up.
[How is it used?
Recently purchased and currently in use.
How was your experience with it?
Helmet deodorization and sanitization has become a concern as we enter the season of unceasing sweat.
Every time I do that, I spray Fa BREEZE to sanitize it. When it's bad, I use Helmet deodorizer, but it needs a power supply, so I have to pull out the power cord or carry it to the place where there is a power supply, and that arrangement has become troublesome.
So I reached out to this product that I've had my eye on for a while.
I've used it, and with Full face, Quantity:It's a little difficult to set, but you can use the hang, or the top of the head, as the Quantity:Set and put the SIDE part so that it may gradually accompany the edge of Helmet from the back to the front, and finally, if it stops with Velcro, it is completion.
As for the performance of moisture removal and deodorization, it is not yet Level that I can feel, so I would like to verify it in the future.
How did it compare to other products?
No comparison.
[Points to note]
It has a water supply sensor that changes color. It is necessary to pay attention to the dry condition of the product body.
Other items that would be helpful
Feedback on Manufacturer:Please make one for Boots.
View detail
cleanliness first
I bought it because of the good rating of the impresion.
It will be active in the coming Season.
Quantity as there are 4 Helmets:2pc. Buy Set
Quantity after:2pc. Set is supported by 100-yen Goods
The rating is for now.
View detail
To prevent scratches on Boots
Purchased to prevent scratches on Boots
It serves its purpose, but it's pricey and durable, so I'll be replacing it periodically.
View detail
Questionable cold-weather performance.
I had washed my beloved Henry beguine windproof shirt yesterday, so I wore this jacket for the first time in a while. The temperature was 7 degrees Celsius, and I went out with only the Otafuku Winter Inner and this jacket, feeling the same as the Henry beguine shirt. I was wearing a ThermalShirt on top of the Inner, and this jacket on top of that. The Inner Jacket is so thin that it's easy to put on, but the ThermalShirt is so thin that it's hard to put on. It's easy to wear because it's thin, but it's only a middle layer; it's not as warm as Henry beguine's shirts. View detail
I was able to work with one hand - - -.
It was smooth until I removed the plug, but after removing it, Magnet also got out and just turned into a plug wrench.
Magnet is strong, and once it goes out, it is a treasure trouble to return it to its original place.
However, there may be individual differences, so if Magnet does not come off it can somehow work with one hand so good.
View detail
Plug with Terminal can not be used
Purchase 16 mm.
The first condition is that you can catch Plug with with Magnet,
Second condition to be removed and used as Socket,
With SpringGuide with bonus,
So I chose this product.
But,
The diameter of the hole at the deepest portion is Small
Plug with Terminal did not enter all the way and I could not MagnetHold.
(Plug can be relaxed)
"Being able to catch Plug with Magnet"
I was honestly disappointed with this as it was the first condition.
It seems that there is no problem if you can remove Terminal
Because our Plug can not be removed ...
at least "Terminal type is impossible" Very much
I wanted a precautionary note.
View detail