Reviews
It is intended as an alternative to in-vehicle tools and for emergency use on the road.
The ZX-6R has an on-board tool storage compartment in the back of both the Tandem seat and the optional Single seat cover, but to use it, the storage bracket must be removed with a Hexagonal Wrench. It is very inconvenient though it is appreciated.
Since the servo motor of the exhaust device was removed to replace the external Slip-on Silencer, we decided to use the space to enhance our on-board tools and purchased this Compact with a minimum of tools.
For suspension setting, the Rear rebound damping force cannot be adjusted here, but I don't think this is a place that needs to be changed frequently in terms of usage. I have made a judgment on this.
Front can be used for each adjustment point.
I think it is better to prepare proper tools for daily maintenance, but I think it is better to separate it from emergency use on the road.
View detail
![[YAMASHIRO] Special Tool DAP & DIE SET for YK-018 Motorcycle](https://img.webike-cdn.net/catalogue/images/55528/YK-018_TS.jpg)
We have all the Size you need.
I was worried about E-Value Tap dice set EV-20TD 20PCS, which is often sold at Home center in the same price range.
I bought this one because there are 2 Pitch size Tap and Dice each in M10 and M12.
The fact that it is also sold by Yamashiro is another reason for its selection.
I am a little hesitant about this type of tool unless it is a product sold in stores.
I immediately expanded the screw holes in the Fog Lamp from M5 to M6 and used it to clean the screw holes in the Large and Under Guard. Of course, Dice was also used to clean the screws.
View detail
It is for Motorcycle use only and has a full range of Size
[How is it used?
I bought this to clean up the Screw Lock agent and to prepare the Yamas that were getting crushed when I removed and installed the Bolt for maintenance.
Bolts used in Motorcycle are often finer than standard bolts and will not fit in a standard tap dice.
This product is tailored specifically for Motorcycle and can be used with many Bolts used on Motorcycles.
Was the one you received as per Image?
[Contents] and Package were as shown in the image.
How was your experience with it?
As per its intended use, it functions well enough to clean screw yamas and prepare yamas.
Even if it is not cleaned in one round trip, it will be cleaned after repeated repetitions.
Closing the Nut after using it on both the Bolt and the Nut feels so good because it slips in just by hand. Cleaning it will allow you to tighten it with more correct Torque.
It can be said that it is cosmetically excellent to use this much for Bolt and Nut at this price.
[Points to note]
None
How did it compare to other products?
None
View detail
wiping off
Super absorbent ultra-thick Microfiber Cloth, purchased for cleaning.
Quantity:1 Set of 2pcs. Different colors on the front and back and thick, so it is easy to wipe off, and there is no worry about putting scratches, etc.
The price is not that expensive, so I would like to buy a spare next time.
View detail
![[YAMASHIRO] Special Tool DAP & DIE SET For YK-018 Motorcycle](https://global.webike-cdn.net/uiu/impression/202110/19_1018981_616e653ab5d59.jpg)
First Tap&Dice set!
[How is it used?
I use it to maintain my motorcycle! I hadn't used it before to clean Bolt and Screw holes with Beauty before, but now I use it on the Main to clean Disc Bolt and other parts that were coated with Screw lock material when I tighten them again.
Also, when I'm doing maintenance and the Bolt is hard to get in, I do both the Bolt and Screw holes as a shuffle before installing.
Was the one you received as per Image?
The product itself was just as Image! The size is also for Motorcycle, so it has all the size you need, which is great!
How was your experience with it?
It seems not to be suitable for a little hard usage such as using GunGun or cutting a screw mountain in a new base material.
We recommend that you use it only for Main, for example, to correct the actual object.
[Points to note]
As I said a bit earlier, I don't think the Material itself of this product is that authentic.
Hard usage may cause damage, so it's better to use it carefully.
How did it compare to other products?
Honestly speaking, I thought to buy Astro Products at first, but I picked up this one because the size of Yamashiro's motorcycle line up was excellent.
[Opinions and requests to Manufacturer
It's a cheap product, so it's probably a bad idea, but the package is too lousy.
Please make the package more considerate of storage! If not, it will become RoseRose and squishy, and sometimes I feel sad when I open the toolbox!
View detail
Rigid feeling
I've never used the more expensive ones, so I can't compare them.
I think that's good enough for me.
It seems sturdy and easy to understand when it comes to setting Torque.
Grip is also long and easy to apply force.
Also, there are clear instructions on the back of the Case on how to use it.
If you read and use it, you won't break it by mistake.
View detail
Compact is good but surprisingly heavy
OffHow about one of the safe goods to put in the backpack when touring by car...?
However, because MONKEY Wrench is quite small, it is a small pattern so that it is impossible to pull out Shaft by Tire exchange.
View detail
![[YAMASHIRO] Special Tool DAP & DIE SET For YK-018 Motorcycle](https://global.webike-cdn.net/photo/impression/b5/b5806cd74e10ec6bf67ad84bce5d213fL.jpg)
It must have been planned by someone who knows Motorcycle maintenance.
Tap & Dice is more often used to fix a weakened screw mountain than to cut a new screw.
As a Sunday mechanic, I'm sure we've all had the experience of having a hard time getting the bolt in when servicing a motorcycle.
In such a case, if you spray CRC or something like that and tighten the screw hole forcibly, the screw hole will be damaged more and more, and in the worst case, when you remove the screw hole, it will be damaged and the bolt will be broken.
In such a case, it is good to repair the Screw.
Put some cutting oil (anything is fine. If you put cutting oil (any kind of oil, even Grease) on it and put it through the Tap (Dice), you can get a good result.
Screw will be able to enter without Stress. It is a pleasant feeling.
So you should keep one Tap dice set in your tool box for Tap (modification of Female Screw on Nut side) and Dice (modification of Male Screw on Bolt side).
There's one more thing you need to know!
This Yamashiro-made Quantity:Set has a nice SizeLineup.
Please compare the Size content with many other products in Home center and Amazon etc.
Quantity that contains M10×P1.25:There will be almost no Set. (Pitch1.5 is the mainstream for M10)
The fact that they include a fine grain is the deciding factor. The ones I use most often are M5~M8, but Motorcycle has M10-P1.25 too, like Engine Mount.
It may not be suitable for hard applications such as cutting screws in a new iron block, but it is highly recommended for restoration.
View detail
Essential Items for WR250F
This tool that can access the plug of WR250F from an angle is active because the plug of WR250F is right under the main frame.
You need a little hang to turn it, but if you get used to it, you can remove and tighten it all with this one.
Be careful when doing so, as the tool may hit the Radiator.
View detail
Not PROSpec.
The people who use the Tap and Dice a lot and use them on a daily basis are worried about them being like toys. I think.
But if you don't want to buy a tool that's used infrequently and doesn't cost thousands of dollars for a single screw hole.
This Quantity:With the Set products in the toolbox, you can rest assured that you'll have peace of mind in the event of an emergency.
I used it on my 25 year old Motorcycle Brake Rotor Bolt and Bolt holes The Screw hole/mountain is played to Beauty and
It worked fine
View detail
If you use it sparingly
We don't recommend buying it as a tool for everyday use, but it's a great tool for emergency use The other day, I used it to tighten and remove the Battery The other day, I used it to tighten and remove the battery, and it worked fine View detail
Buy for the time being
Brand There is no accuracy or texture of the thing, but I am not Motorcycle shop or Racer, so I just bought it because it only has to play its role as it is. It should be better at all than tightening with a can. View detail