Reviews
Good feeling
I thought it would reduce the load on the Engine, but I could feel the Engine revving better (Smooth). It is worth installing. It is worth it to put Cam Screw (sold separately). View detail
Motorcycle is moving right along.
The SP Tadao PowerBox and Bore Ace Twin oil line had already been installed.
The two above products made the embellishments mellow and easy to drive with, and this improved it even more.
In the twin oil line, wobble during gear changing in low speed GEAR is reduced by a Large width, and this response makes it even smoother.
The most noticeable change I experienced was a clear change in the way the Axel progresses when twisted at high GEAR.
I feel like I have more propulsion to move forward smoothly and leanly rather than faster. Running has become more enjoyable.
Mounting is done by shifting the Tank a little. It looks good and unobtrusive. If I had to make a special order, I would prefer the hose color to be Black.
Oil line and quantity by all means:This is a product that should be tried by Set.
View detail
Ponting is safe. I would love to see Black released.
Purchased for installation of the company's Cylinder headResponse.
They take into account the length and other factors for performance demonstration, so there is no need for us to do any processing.
It looks sturdy and solid to the eye.
After installation, this Hose is hardly visible from the outside, but a little bit is visible. The color Black seems to be better in terms of appearance.
View detail
True to its reputation!
I was skeptical, but after reading the comments of many people, I bought it.
Installation was easy. Does this make a difference? I was like, "Yes, it does," but once I started driving, sure enough.
The embroidery is mild, and the overall riding is smooth.
This would be worth installing!
View detail
Refreshing around the Handlebar
Introduced to Refreshing around Handlebar.
When I installed the HURRICANE SWCondor in reverse, I was curious about the existence of the decompression cable and purchased it. The installation was not difficult and only took about an hour. In the separate handle, there will be no more cable, so you will not have to worry about handling it. I chose the rubber type because I thought it would get hot when restarting.
View detail
More effective than expected.
It was installed on a 2003 Carburetor Vehicles.
I forgot how to adjust the Camshaft Chain, which I thought I had memorized, and it took me a long time to remove the lock nut on the Screw.
The Hose is long, so it is easy to cut it appropriately. If the Hose is too long, oil may accumulate in the Hose, so I adjusted the length to an angle where the oil can return.
When I started the engine, I noticed that the noise was much lower than when idling. When I open the throttle, I can feel that the revving has improved and the leaning has decreased, but at the same time, I also feel that the embrace has become a little weaker.
At higher RPMs, the loss is reduced and power is definitely increased. On the other hand, the frequency of vibration seems to be affected, and I felt fine vibration on the HandlebarLeft Side and Leftfootpeg at RPMs that I had not noticed before while driving at high speeds. Overall, I am highly satisfied with the product, and considering the price, I think it is a Recommendation product.
View detail
The finish is good.
Boa Ace's aluminum parts are really well finished.
Not only in appearance, but also in fit when assembled, there are no problems at all.
View detail
This is a Recommendation
RH01J.
You don't have to be a hardcore fan to feel the effects of these parts. It was just as other reviewers said.
Even an amateur like myself could feel the mild feeling of embellishment, acceleration, and above all, the reduced burden on the engine, all by feel, as soon as it was installed.
Even without knowledge or experience, the replacement of these parts is easy enough to understand and install.
I think it will be very effective for my car, which I wanted to ride on a large cutter since I commute 25 km one way.
View detail
SR became healthier?
When I first saw it, I wondered how this would work. I thought, "But high turnover (4000) Acceleration from above has been extended.
When the acceleration from 100 km/h to 130 km/h is in NORMAL, if I turn it any further, won't it break? The feeling of "I'm not sure I can do this" is lessened.
Also, the sound of the Exhaust System used to be a bit jumpy, which I didn't like, but now it has a mild bass sound, which is also a secondary effect of the BigLife. (Favorite sound)
View detail
Making flowing stones
Every time I think about it, I can put the Boa Ace product on without worrying about anything.
I've been told that the products are expensive, but I can't help it because they are of such high quality and safety.
For purchase to fix Breather filter.
I don't know how effective it is.
View detail
Fits: YAMAHA SR500, YAMAHA SR400
It has a good heat dissipation effect
It is a fin for better heat dissipation of the Camshaft Cover
To install the Heat Radiation FinBody, remove the Porto and Pipe and Just insert it into the Camshaft Cover from the side, fit the Pipe and tighten it with the Bolt
It took only a few minutes to install it because it's in a position where it's easy to put in the L-shaped Wrench
The heat of the Camshaft Cover, which is difficult for the driving wind to hit, is conducted to the fins, and the part of the cover that jumps out is It's perfect for heat dissipation and cooling from afterwards as the wind hits it
You can see the heat is transferred well because it's hot after the run
I don't know how many times it will go down, but it will certainly help
View detail
It is as expected
It's easy to install because you only have to cut the original tube and install it in between
It's hard to do because it's a bit cramped
After installation, the rotation below 3,000 rpm has improved and the engine braking has decreased I feel like I'm Mild
I don't think the vibration has changed much
Maybe my SR is hard to understand because I put a lot of things on it and the vibration is Mild
The price isn't cheap, but it's effective, so it's a good Parts
View detail
Mounting on Yamaha SR 400 FI
I have installed Bore Ace Rear Sets, so every time I run the Engine i'm getting in the way of folding the footpeg, so I'm going to use the Kick pedal made by Boa Ace I replaced it. footpeg is no longer need to fold it, it is easier However, if you remove the Circlip as it is and replace the Kick pedal Because it interferes with the ClutchCase, you need to remove the whole axis of the Kick pedal once You have to move the Spline back a piece
Because of this, the Stroke of the Kick pedal is shortened by a piece, so the Engine It will take some hang to get started, but you'll get used to it quickly
The purpose of this is to eliminate the need to collapse the footpegs at Engine start-up, so the I am satisfied with it The price is high, and the product is clean and strong enough to be used as an OEM product I think
View detail
Mounting on Yamaha SR 400 FI
Although I did not understand the effect well in the urban area, I found out the difference clearly before traveling on the highway. Engine got to be light and well circle anyhow, there was no feeling of forcibly turning a 100 kilometer cruise on a highway, it became very easy. Acceleration is also good, price is affordable and Large is satisfied satisfied.. Installation was easy without removing Tank. Since NORMAL's Hose alone is not enough in length, we purchased TH 200 at the same time and cut it to about 8 cm and used it. View detail
Oil temperature fell down.
Installation is easy. I run the same Route at the usual temperature and the oil temperature is 5 to 10 degrees lower. We installed Heat Radiation Fin attached to Cylinder head at the same time, so we can not identify which effect it is. What is mysterious is that the machine noise of the running engine after installation is a sharp sound. I understood well that there is a cooling effect, but because the price is high, Cospa made the star 3. It is regrettable that Torque is not stated in installation Instruction Manual. To View detail
The oil sound has fallen.
At the same time we installed Heat Radiation Fin of the 1st stage and the 2nd stage. Installation is easy, but it is regrettable that Torque of Nut tightening was not described in Instruction Manual. After installation, the high-pitched sound is mixed in Machine noise of the running Engine. I feel that comfortable vibrations have increased slightly. If you run on the same Route as usual the oil temperature is 5 to 10 degrees lower. I am looking forward to next summer.. View detail
One stone two bird Decompression lever
The goodness of construction is a falling stone Decompression lever.
I wanted to refresh around the Handlebar, and I only made Lever by excluding Wire at the same time as product announcement.
He seemed to have a heat dissipation effect, so I chose a thing with Rubber.
I feel it is likely to have a heat dissipation effect because it is hot when I touch it after running.
Although it is hot at the time of restarting, I do not grasp it all the time, but I do Gloves for the first time.
SR is Motorcycle showing Engine, so I think that it is a satisfactory finish in that respect.
It is certain that it is easier for the Decompression lever to be posted by Wire and have it at hand.
View detail
According to reputation!
【What made you decide the purchase?】
Net and Impression
【How was it actually used?】
According to the reputation, the vibration of the engine got mellowed overall. The paste of Speed ??has improved better than before. I should have installed it faster.
【Was it difficult to install? (Hard parts case)】 It was easy..
【Please tell me the point of installation and hang (in the case of Hard parts)】
It is the point that decides the length from Hose's routing. When worried it may be better to cut longer and stuff little by little.
[Is there anything I was disappointed about?]
There is none.
【Hope for Manufacturer - Please let me know if you have any improvement points]
It might be better if you specify the standard of Lose of Hose.
【Have you compared items?】
There is none.
View detail
Design, Best for both cooling performance
Because of the effect of Heat Radiation Fin attached to countermeasures against the temperature rise of Engine due to the Bore up of Bear MONKEY, install it in order to further improve the heat dissipation effect.
Considering Design, fixed with Black's Taper bolt instead of the attached Bolt.
Heat dissipation effect rises as expected, Dress-up effect is more than expected
View detail
Both making and performance are satisfied Large.
For Cylinder HeadHeat Radiation Used for extending FinHRF-2B.
Even HRF-2B alone has sufficient effect, but when this product is attached it is more effective in stabilizing the oil temperature.
Even at temperatures above 35 degrees, the maximum oil temperature is around 95 degrees. (* Quantity on how individuals run : Pair (for Left and Right) Will you be there? - - )
The construction is also good, the wearing figure is cool too !!
Looks good and performance is a Large satisfying dish.
View detail