Reviews
OilRoute partially changed Custom
We have installed Cam Screw together with Camshaft ChainBypassKit at the same time, and by changing a part of OilRoute, we have been able to increase Torque at low to mid speed range as well as improve Throttle I feel that the throttle response has improved as well as the Torque up at low to mid speeds. The hose length can be adjusted to your preference, I used it as it is and added a Colgate Tube to the hose for protection. It is fun to customize the Ideas to your own taste, isn't it? View detail
Fitting quality
We have now installed all the cooling fins from the first to the third level. The installation is very good, and the fitting to the SR is so well made that we thought it was OEM. I bought it this year to prevent heat leakage in summer, but in the past, oil temperature has risen up to 100℃ during summer touring. I am reporting the effect on the cooling fins with high expectations. We also considered using an oil cooler, but considering the concern about over-cooling during the winter, we decided to go with the cooling fin system. I would like to continue to enjoy my motorcycle life in the future. View detail
Effectiveness. Recommendation if appearance is acceptable.
I bought this product to adjust the temperature for summer although it is still winter.
First, a few thoughts on the installation.
NORMAL is cooler..,
I'll take it off if the effect is not that great after running it.
Try running
Oh, I can't miss this one.
The ride quality has improved, with more stickiness at low speeds.
I think that NORMAL is the most beautiful Engine for SR, but once you put it on, you can't take it off because the Bore Ace product improves the ride blatantly.
The appearance of the product was a concern, but while it is quite noticeable when viewed from a crouching position, it is not so noticeable from the normal line of sight.
It is effective. If it also dissipates heat, it is a good cosmetic product. If the appearance is acceptable, this is a product that can be recommended.
View detail
Vibration is reduced and engine braking is weakened
This is an introduction with a bore Ace Valve on the Head side.
I installed it hoping to solve the lack of Torque feeling between 5th gear around 4000 rpm and 5000 rpm.
I think the result was a pleasant improvement.
Up to 4th gear, the Engine feels as if it is revving lighter, an effect similar to Valve, which was worn on the Head cover earlier.
If you are not concerned about vibration, you can wear it.
View detail
There are effects that can be felt.
I installed it on the last model of SR400 and ran about 300km.
Installed to SP Tadao's PowerBoxPipe attached first.
The wobble during gear changing is clearly reduced, and the overall ride is smoother.
Perhaps it is so effective that anyone can feel it.
On the other hand, is there a slight decrease in the sense of "do-do-do"?
I chose the one with a window so I can visually see the flow of Oil.
No complaints about the functionality of the product, and the construction itself is beautiful and can be installed without any discomfort.
Mounting Screw is Material:I guess the drawback is that it is aluminum and weak, so it has to be tightened with care.
It is a good product overall.
*Blue SWAGE LINE and Logo engraving on the body have been eliminated with the Spec. change.
View detail
For overhaul around carburetor
Put some in a Boa Ace mani
Used for thermal protection.
View detail
After working on Engine.
Until I get my license back on my current SR.
I'm going to keep riding.
It was installed for Engine's labor.
I am glad I put it on because the vibration is also Mild.
Another manufacturer also offers Reinforced Oil Pumps.
It is Classical in appearance, and that is better.
I like it, but that one has Engine.
It has to be opened, strengthened 1 to 2.
This one takes a separate branch and uses 2Line.
The Engine is gentle to the Engine because it can supply Oil.
I thought it would be a boa ace, so I went with this one.
View detail
Dress-up。
I'm going to paint the Engine black.
Balance of color and dress-up are the first step.
Silver is installed. As for the anti-heat effect
I thought it would be slight for Single Body.
Oil seeps slightly from the tip.
View detail
I feel less depressed between each shot.
I installed it with the intention of lowering the Engine internal pressure a little while also protecting the Valve stem seal. It seems that it took a long time to develop this product.
In the Normal tank, the body is not visible in a good way unless you look into the tank, regardless of whether you choose Silver or Black.
View detail
It certainly looks different…
It certainly seemed to work…
I feel a little easier to ride…
For the installation, it was a good decision to have another OEM Hose, just in case.
View detail
It's an unexpected effect
Although installation is possible without taking down the tank, it is Large strange to put in L-TypeWrench I struggle with
The Short Neck L-TypeWrench makes installation quite easy
I bought it for the main purpose of cooling, but the effect of the spread of Tappet is that the blowing up and The sound of the Engine sound has improved
The Axel and the fee ring of the increase in speed meshes with the Axel, or rather, the high GEAR at low rpm It had some unexpected effects that I didn't expect to experience, such as less rattling and better stickiness
The price is not cheap or even more SR400 or fun parts
View detail
You need a hang to apply the Engine
Installation is easy; it's just a matter of removing the Circlip and replacing the Kick Arm You need to be careful not to lose the Small Ball and the Spring at the base of the ball It is Also, if you put the Kick Arm on as it is, it will interfere with the Engine, so the Kick Arm Unlike NORMAL, you need to shift the holder to the back of the engine It takes some finesse to apply a footpeg, so you don't have to fold it every time the Engine starts I am satisfied with the ease from View detail
Mounting on Yamaha SR 400 FI
I installed it without removing Fuel Tank so I took time to tighten Bolt of Right Side. Feeling of Engine 's Ring seems to be getting lightly blown up. I think this Parts will demonstrate to us in the summer when the outside air temperature is high. View detail
Is good
If there is enough skill to remove Normal cab, it will easily take you
Negative pressure is explained to be connected to Fuel Cock, but I dared to connect to Air inductor
Since there is no choice, Fuel Cock can be reversed upside-down and responded with a trick technique that can lubricate natural head difference
Therefore, it became possible to use OFF in addition to the reserve
I wanted negative pressure like Dual Silencer like OEM's Adapter so that it can correspond fully to the SR of intention 02 in the desire
View detail
Cooling effect + Dress-up effect
Kuma MONKEY 's SStageBore up accompanying measures to increase oil temperature Purchase installation was too long in the attached Bolt and wanted to make the BlackBolt of Stainless Steel so M5Taper cap bolt 35 mm under the head Quantity : Buy and install 2 pc. Heat dissipation through Bolt, but the temperature of Body will be quite hot, so the heat dissipation effect is high. After installation, the oil temperature drops by about 2 to 5 ° C, and the temperature decrease speed after stoppage surely becomes faster.
High Dress-up effect
View detail
Recommended for Oil flow enhancement
Since our SR 400 is 79 years old, only on the Intake side
There was no OEM line of OEM.
During Overhaul, especially on the Exhaust side
Abnormal wear was observed in Cam and this part was introduced.
As the aim is to supply Oil from another Pump to the Head,
I expected exhaust heat and lubrication.
There is also opinion that supply from line without Oil filter is not good,
○ If iron powder is generated due to insufficient supply of Oil to Head, it is toppling over.
○ Since Oil via Filter is also circulated by sucking up from Oil pan, it does not mean circulating with dirty Oil alone.
I think.
As for improving durability, we can not comment on the effect because we just introduced it, but there was an effect on heat sagging when driving on the pass.
If there were some dissatisfactions, even if it was squeezed by the prescribed Torque, slight leakage of Oil occurred, so we responded with liquid Seal material,
When exchanging Plug, the head of Torque wrench came to be hit.
View detail
As a principle, it is as a Title. although he needs to rebuy the Banjo bolt -- -- some effects are theoretically expectable. There is an effect of appearance, and with their being budget prices, since application is the made parts
As a principle, it is as a Title.
although he needs to rebuy the
Banjo bolt --
-- some effects are theoretically expectable.
There is an effect of
appearance, and with their being budget prices, since
application is the made parts at other places, I think kana to do
use of with each Owner's device.
View detail
The design was pleasing and purchased. Although a fine slot cuts, the merit of structure is felt that there is no bali. It seems that there is a radiating effect somewhat since heat has got across also to this if touring is carried out.
The design was pleasing and purchased.
Although a fine slot cuts, the merit of structure is felt that there is no bali.
It seems that there is a radiating effect somewhat since heat has got across also to this if touring is carried out.
View detail