Reviews
Fit feel on par with OEMs
Thank you very much for the Chain tensioner. The installation is completed by Bolt On, but I adjusted the tensioner by overlapping the attached washers so that the chain would be more centered on the roller. In my case, I used all the washers to get the quantity:I was able to set it. I could not feel the running performance, but I think it is useful to reduce the flapping of the Chain. However, since the tension is not always applied by Spring, it is necessary to adjust the tension of the chain. Just a little... View detail
SR400 essential custom parts!
I am riding an SR400 Final Edition.
From the time of delivery, the Shift change fee-ring was not good, and I was dissatisfied with the clunky Shift operation.
I had given up on it because it was a new car. I had given up on it, but after the break-in period was over and the car had traveled over 5,000km, the Fee Ring was still the same ….
Although there may be individual differences, my machine was hard to enter Neutral and hard to enter 1st gear when starting off, so the stress on the Shift operation was building up.
I had read about Change Accent on blogs and other sites and embedded myself in anticipation of its effectiveness.
It is an easy part of the work, Material that receives Chain:Plastic? We cut the plastic color by 10mm to match the dimensions of the plastic color, and installed it in place.
After installation, I test drove the car for about 40 km and was surprised to find that the Scauper went into first gear, which had been difficult to do so far, when starting off.
What is it that I used to have to step on the Shift Pedal when I was blowing or clattering! And the shift change in acceleration and deceleration is also very smooth, with no resistance and no forced feeling at all…. And when you put the car into Neutral before stopping, it goes into Scauper without even looking at the Indiana cator!
I can't believe that an investment of only a few thousand yen can have such a great effect!
As another person wrote, I think it is an essential custom for those who ride SR400.
View detail
OilRoute partially changed Custom
We have installed Cam Screw together with Camshaft ChainBypassKit at the same time, and by changing a part of OilRoute, we have been able to increase Torque at low to mid speed range as well as improve Throttle I feel that the throttle response has improved as well as the Torque up at low to mid speeds. The hose length can be adjusted to your preference, I used it as it is and added a Colgate Tube to the hose for protection. It is fun to customize the Ideas to your own taste, isn't it? View detail
Fitting quality
We have now installed all the cooling fins from the first to the third level. The installation is very good, and the fitting to the SR is so well made that we thought it was OEM. I bought it this year to prevent heat leakage in summer, but in the past, oil temperature has risen up to 100℃ during summer touring. I am reporting the effect on the cooling fins with high expectations. We also considered using an oil cooler, but considering the concern about over-cooling during the winter, we decided to go with the cooling fin system. I would like to continue to enjoy my motorcycle life in the future. View detail
Looks good for Engine.
The effect was not felt on the ride, but it seems to reduce the load on the Engine. View detail
Necessary items to connect to Air cleanerBox
Not necessary if no Air cleanerBox is available or cannot be connected. View detail
Waterproof property is not good
I bought this for Repair because the original Fender Eliminator License Plate Light was damaged. The light shines well and the visibility is good, but the waterproof property is not so good… Large rainfall causes water to get in… For now, I use it with Duct Tape wrapped around it, but I think it would be better to use it for a long time by coking etc. View detail
It didn't work
I tried to install it, but I have it set to short suspension.
What a surprise, Chain didn't hit Roller ….
I will try to install it again when I change to Normal suspension.
It would have been nice if you could have written something about not being able to use it if it's Lowdown.
A little disappointing.
So we do not know the effect of the installation.
View detail
Good feeling
I thought it would reduce the load on the Engine, but I could feel the Engine revving better (Smooth). It is worth installing. It is worth it to put Cam Screw (sold separately). View detail
Looks rust-resistant
I have not installed it yet, but the OEM bolt of SR400 has rusted, so I purchased this product expecting the Titanium bolt. The OEM bolt is tightened by Hexagonal Wrench, but this product is Hexagon Bolt, so I am worried if I can manage the torque in such a small space.
I would like to post an IMPRESSION after installation.
View detail
Effectiveness. Recommendation if appearance is acceptable.
I bought this product to adjust the temperature for summer although it is still winter.
First, a few thoughts on the installation.
NORMAL is cooler..,
I'll take it off if the effect is not that great after running it.
Try running
Oh, I can't miss this one.
The ride quality has improved, with more stickiness at low speeds.
I think that NORMAL is the most beautiful Engine for SR, but once you put it on, you can't take it off because the Bore Ace product improves the ride blatantly.
The appearance of the product was a concern, but while it is quite noticeable when viewed from a crouching position, it is not so noticeable from the normal line of sight.
It is effective. If it also dissipates heat, it is a good cosmetic product. If the appearance is acceptable, this is a product that can be recommended.
View detail
PetitCustom feeling too!
Lowdown so I went to Short Side Stand because I was standing too much in NORMAL Side Stand.
Then this one tilts too much….
I put Boots on and it was a bit of a nice tilt.
A little processing was required, but it is easy to do.
I like it because of the PetitCustom feel.
View detail
Shift change can be done firmly.
This is an installation on an sr400Final edition. I was not particularly dissatisfied without the assist, but after installation, "Snap" and Shift is entered, and it feels good. Especially, when waiting for a traffic light and putting in Neutral, Stress is also reduced. View detail
Required Parts for Change Accent
These are the Parts required for the installation of the Change Accent, but we would like them to be included with the Body.
Change Accent, installed on sr400Final edition. I was not particularly dissatisfied without Assist, but after installation, "Snap" and Shift is entered, and it feels good. Especially, when waiting for a traffic light and putting in Neutral, Stress is also reduced.
View detail
Is it a fake? I don't know.
The Instruction Manual is really minimal, but the distance to the Chain is adjusted by Washer, etc., so beginners must be putting it on the wrong way. View detail
It worked.
Shift pedal no longer feels squishy laterally, and although the shift change is not drastic, I can now enter Snap and Smooth when entering from N to 1 at a stoplight.
Partial cutting of the OEMSprocket Cover was done using Leutor. It was not that difficult even for an amateur.
View detail
Motorcycle is moving right along.
The SP Tadao PowerBox and Bore Ace Twin oil line had already been installed.
The two above products made the embellishments mellow and easy to drive with, and this improved it even more.
In the twin oil line, wobble during gear changing in low speed GEAR is reduced by a Large width, and this response makes it even smoother.
The most noticeable change I experienced was a clear change in the way the Axel progresses when twisted at high GEAR.
I feel like I have more propulsion to move forward smoothly and leanly rather than faster. Running has become more enjoyable.
Mounting is done by shifting the Tank a little. It looks good and unobtrusive. If I had to make a special order, I would prefer the hose color to be Black.
Oil line and quantity by all means:This is a product that should be tried by Set.
View detail
Ponting is safe. I would love to see Black released.
Purchased for installation of the company's Cylinder headResponse.
They take into account the length and other factors for performance demonstration, so there is no need for us to do any processing.
It looks sturdy and solid to the eye.
After installation, this Hose is hardly visible from the outside, but a little bit is visible. The color Black seems to be better in terms of appearance.
View detail
Vibration is reduced and engine braking is weakened
This is an introduction with a bore Ace Valve on the Head side.
I installed it hoping to solve the lack of Torque feeling between 5th gear around 4000 rpm and 5000 rpm.
I think the result was a pleasant improvement.
Up to 4th gear, the Engine feels as if it is revving lighter, an effect similar to Valve, which was worn on the Head cover earlier.
If you are not concerned about vibration, you can wear it.
View detail
Those who understand can understand Rapid.
Tank end a little. (about 8mm) The Level goes up and becomes the same as the Level under Seat, and is Refreshing.
Those who understand will understand.
In addition, for those who remove the tank, the tank has been raised slightly, making the removal work easier.
I recommend it because it is easy to install and inexpensive.
View detail