Reviews
Simple.
Although 2Camera (front and rear) has become the norm for Motorcycle, we chose Front's 1CameraType.
I decided to go with 1Camera because the rear wiring is troublesome, and the 2CameraType's rear image quality is reduced, which is good for preventing agitation, but not really necessary.
Since 2Camera costs about 35,000 yen, just 1Camera is better than nothing.
I usually use an IPhone, but I couldn't connect to the app and couldn't tell if it was working or not, so I guess I made a mistake...
So I connected with Android and was able to see it (laughs).
View detail
Fits: Others ASTRO-GX, Others RX-7X, Others ASTRAL-X, Others VECTOR-X, Others XD, Others RAPIDE-NEO
Pin lock, excellent anti-fogging effect
I chose the dimming Type.
When exposed to ultraviolet rays, it becomes dark during the daytime when the sun is strong because it is firmly Black, and when the sun goes down and it gets dark. [Color] It is a convenient Pin Lock Shield that will become Clear.
It is more expensive than other colored ones, but I feel that it was not an expensive purchase as it changes with the weather and reduces Stress when driving.
I am currently using it on my touring helmet and am considering installing it on my commuting helmet as well.
View detail
![FITT360PBα [Wearable Recorder]](https://img.webike-cdn.net/catalogue/images/123148/01_TS.jpg)
neck-mounted digital voice recorder
As a Type without Wiring, I bought it for its ease of use.
The neck is thin, so it's hard to fix it. It is lightweight, so there is no burden on the neck.
As for the images, they're pretty good. (I'm checking general and wide angle, fisheye, not yet) . The sound sounds almost like noise to me.
The operating time is short because it is a rechargeable Type, but it is possible to use it for commuting to work, etc.
View detail
![ULOOK Blaze Mirror] Anti-fog Film for CPB-1V Helmet](https://img.webike-cdn.net/catalogue/images/133234/4color_TS.jpg)
Fits: Others Compatible with CPB-1VShield, Others Glamster
U-LOOK Blaze MirrorAnti-FogSeat
[Color] As a Smoke Mirror shield user, the ability to convert the OEM Clear shield to Mirror will help prevent the Mirror from peeling off due to cost savings or pebbles, etc.!
No distortion and the view is easy to see in Mirror.
View detail
Fits: Others Compatible with CPB-1VShield, Others Glamster
The costumers are great and the quality is great!
I bought the Silver mirror. I was a little concerned because the visible transmittance of the Silver was 12%, but I don't ride at night, so I thought Large would be durable. The quality is very good and the price is lower than buying Shield. The cost is great! Highly recommended! View detail
Fits: Others Compatible with VAS-V MVShield, Others RX-7X, Others ASTRAL-X, Others ASTRO-GX, Others RAPIDE-NEO, Others XD, Others VECTOR-X
Not too dark and easy to see in Mirror
Used for Clear shield.
I think you can hardly see their faces from the outside.
From the inside, it is not too dark for Mirror, but the view is quite blue.
Darker than La Semi-smoke's Shield in the comparison I used, [Color] It seemed brighter than Smoke.
Individuals differ and have their own preferences, but I find it works fine at night.
I also like the fact that Mirror will be on the inside of the Shield, so I don't have to worry about it peeling off by touching or wiping.
I loved it so much.
View detail
Fits: Others
EDR-21Gα
It took me a long time to put Wiring together nicely. View detail
Fits: Others Compatible with CWR-F2Shield, Others Compatible with CWR-F2RShield, Others X-Fifteen, Others Z-8
Cost-effective!
OEM Mirror shields are expensive, but this product provides the same level of replacement as Mirror shields and is very cost effective.
However, it was necessary to adjust the Pin lock with the adjusting Screw to make it adhere.
View detail
Fits: Others Compatible with CPB-1VShield, Others Glamster
I highly recommend it because it is not too dark!
"Green Light" I purchased Mirror!
There are other options for color variations, so you can choose the one you like best. The installation was easy:just remove the Shield from the Helmet and fix it to the Pin lock, so anyone can do it, and there is no need to buy an additional Shield. Moreover, the price is low compared to the cost of buying an additional ShieldBody.
I was surprised at the anti-fogging effect when I actually used it.The color of the Green mirror is SMART, you can just barely see your face inside the Helmet, but from the inside it has a Gray tint. It is like wearing thin Sunglasses.
It allows you to concentrate on driving during the day and also blocks reflected light. However, it sometimes felt a little dark when driving in Tunnel or at night, but it was not a hindrance.
View detail
Fits: Others Compatible with CF-1WShield, Others KAMUI III, Others SHUMA
It's insanely good.
It's great, I think changing the Shield makes it too dark, but this makes it so much easier to see both day and night. I think I made a good purchase. View detail
Fits: Others Compatible with VAS-V MVShield, Others RX-7X, Others ASTRAL-X, Others ASTRO-GX, Others RAPIDE-NEO, Others XD, Others VECTOR-X
Recommendation
The NORMALClear shield can be made Mirror, so it is the best cosmetic solution, and it is about half the price of a Pin Lock Seat on a Mirror shield. Also, VAS-V shields are especially good because you can make the entire shield Mirror when the shield is closed. View detail
Fits: Others VECTOR-X, Others XD, Others RAPIDE-NEO, Others ASTRO-GX, Others ASTRAL-X, Others RX-7X
Not good as a high functionality added product using Pin lockSystem.
Maybe not.
I bought Pink to see if it would help with my tired eyes and blurred vision.
To put it roughly, it is ARAI's Semi-smoke with Color.
As you may know if you use ARAI, the ARAIHelmet works well with the Blow Bench and the Shield fogging is not so bad. (Personal) 、
To be frank, it is more cost effective to buy a regular semiSmoke Shield. It can be used as a spare.
As for my impression of the touch before Installation, the glare certainly seemed to be suppressed when I looked at SilverMatte's illumination through the Shield.
Ordinary Pin Lock Seats are made of a soft material, which can cause a wound if you scratch your nails on it, but this one is made of PET material.:Plastic-like, hard. Anti-Scratch Seat-like for the phone.
I thought it would be nice to be able to handle it rougher than the anti-fogging Main Pin lock.
And then the actual running. I ran about 200 kilometers on a sunny day.
The Green color component is emphasized.
Semi-smoke cuts the sunlight and also makes the shaded areas more clearly visible. [Color] Better visibility than Smoke. In general, it is easy to see.
I think the performance is as good as the manufacturer claims.
[Color] I feel like it's taking longer to dark-adapt than Clear, but I think it's just a Vitamin C deficiency.
The darker the room, the better the impression.
There is also a polarized type in the same series, but I don't want it to be too dark&I guess it's a spec for people who prefer natural vision as much as possible.
There is a discomfort in the coloring when Shield is opened and closed.
When closed, it is easy to get used to it, but when the Shield is opened, the scenery looks greenish due to the complementary color afterimage effect. It seems to be intoxicating for some people.
Pin Lock Seat is annoying in dark places such as Tunnel because of the double reflection of the light source, but this one seems to be suppressed. However, it may be different at night.
As a general comment, I bought the Pink color for daytime use, but I thought I could also buy the Yellow color for nighttime use.
Now, the important thing is the installation, but as others have said, it floats. However, it is possible to make it adhere.
The hard seat also makes it difficult to fit the seat, and because the hard seat suppresses the warp of the shield, the seat does not stick together and floats when it should with a normal Pin Lock Seat.
In addition, the adhesion of the liner that adheres the Shield to the Seat is so good that once it is seated in the SeatPost, it can no longer be positioned without gapping.
I mean, this is a very bad match with ARAI's SeatPost.
It is still hang to be adhered to closely,
After installing the Seat, turn the SeatPost to lock it lightly. At this point, the Center section should still be floating.
With one hand, hold the center of the Shield with the Seat by holding it with the fingers, and with the other hand, hold the edge of the Shield and spread it out and back again.
Then Seat will move Gap a little bit. If SeatPost is moving, you can tell because SeatPost will become slack.
After lightly tightening the slack SeatPost again, adjust the position by spreading it back while holding the floating part with your finger, and then tighten the slack Post......this is called "Quantity:Pair (for Left and Right) Repeat until it adheres nice and evenly etc.
If you try to force the SeatPost to adhere to the Seat by using only the adjustment function of the SeatPost, the Screw will quickly become licked.
View detail
Fits: Others X-14, Others Z-7 RYD, Others X-TWELVE, Others XR-1100, Others Z-6, Others QWEST, Others NEOTECII, Others GT-AirII, Others GT-Air, Others NEOTEC
I am satisfied with the low price.
Used for Z-7.
The dimming is unpopular with other reviewers, but we purchased the [Color] The product is Clear, so there were no problems whatsoever, and the feel was comparable to the OEM.
The price is also lower than SHOEI's, so this is the recommendation for those who change frequently.
I'm going to Repeat it again.
View detail
Fits: Others ASTRO-GX, Others RX-7X, Others ASTRAL-X, Others VECTOR-X, Others XD, Others RAPIDE-NEO
Transparency is low.
I purchased ARAI's OEM Clear Shield in the hope that it would be a dimming shield, but in a nighttime room with almost zero UV light, the transparency is quite low, and although it is hard to convey in the photo, it seems to be slightly cloudy and cloud-like. I removed the protective seat. I didn't test the dimming in winter outdoors, but I don't think I should expect too much. I will make a comprehensive judgment after actually driving the car. View detail
Effective
Anti-fog effect is perfect.
I used it inside a Clear base Mirror shield and it was perfect for nighttime visibility. It also looks great as a brown.
It takes a hang to install it, so I was forced to install it and the edge chipped off...
Next time. [Color] I would also purchase Smoke and Polarized
View detail
SS is difficult to find a place to install
I had not been able to find a place to install the Body, so I left it for a while, but then I got up the nerve and started installing it. (This is the first time for me to install the driver's recorder on a motorcycle.)
Others have it tucked under the RearSeat but I have moved the ETC there so I can't install it.
In the end, the bracket was made to fit under the front seat.
This is because the 22SeriesBody's small type contributes to the large size, and it would have been difficult to fit it neatly in the 21Series.
The FrontCamera is mounted inside the duct to avoid contact risk when stroking and reflecting the surroundings.
Since I am not sure about double-sided pasting, I fixed it with Option EDR-P05 and the Bracket that I created.
This is thanks to Small TypeCamera and the nifty Option.
The RearCamera is also mounted on the side of the Number with the Option EDR-P04, considering the reflection of the surroundings and how SMART it is when mounted. (The bracket is too firm and heavy, so the Fender Eliminator in particular needs to be reinforced to prevent shaking.)
The Switch is installed by modifying the Switch stand of another product.
Since the switch is a Small Type, it can be attached to various places, but I think it is better to attach it to a place where it can be pushed immediately.
(Also check the operation with the light on.)
The GPS is mounted inside the Tail cowl and is received with no problems.
Camera adjustment is done with the MotoDR application, but it is also easy to use and is Large sturdy because it is wide-angle, especially if the level is firm.
The driving image seems to compensate for some blurring and looks solid and clean.
(Wi-Fi confirmation is said to be time consuming, so playback only on PC)
However, SS is easily affected by the road surface, so fine pitching on rough surfaces is not an option.
How did it feel to wear it?
The use of the Exclusive Bracket for the vehicle type and the space to easily handle the wiring of the body installation location and excess camera etc. makes it possible to install in a couple of hours even if you are concerned about the finishing touches.
For cars without Space, it is necessary to work with a sufficient amount of time, considering the prevention of Trouble.
The Microphone does not have wind cutting sound, and there is no discomfort at all when listening to it.
The price is high, but there are Merit models with GPS, which automatically set the clock and date and time, and have an app to check the running track and speed, among other things.
I have never purchased Large Land products because I am afraid of them, but I expect them to be durable, especially since they are made by Mistuba Sankowa.
I would recommend this product to anyone who is considering purchasing a DriveRecorderー.
View detail
Trusted Mistuba
[How is it used?
Mainly used for touring
Was the one you received as per Image?
Street Image
How was your experience with it?
I chose this MITSUBA product because of its compact body and reliability in case of emergency, but the Camera is the latest. (Equipped with STARVIS) I am a little dissatisfied with the fact that it is not. However, the recorded picture quality is fine.
[Points to note]
Since the Body is Compact, I don't think there will be any trouble mounting it.
How did it compare to other products?
We compared it with DAYTONA's M820WD, but there was no decisive advantage and we chose it because of the manufacturer's preference.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Mitsuba sankowa Anti-fog film for ULOOK VAS-Z
Item received.as in picture,packing was excellent.shipment arrived on time.my 5th purchase so far.no issue.product as advertised.install and vision a bit blur,not sure if it's supposed to be that way or the product is not well store or old stock.can refer to the picture,the bottom is the pinlock install and the upper is the visor. View detail
Not bad, but ….
I put it on SHOEI's GramStar.
I was going to replace it with Mirror shield, but when something that looked white was released, I bought it.
It is a Pin lock modoki, but it is a mysterious product with color.
As you can see in the image, it does indeed add color, and the view you see is a Yellow color.
At first I wasn't sure about this, but once I got used to it, it was easy to see at night.
It was unfortunate that it was more transparent from the outside than I had expected.
Also, the installation was moderately Large strange. I found an official video of the installation, but I could not imitate it because it seemed that they put so much effort on the Level. I could not imitate it.
Large was strange depending on the direction of warping, but I managed it.
View detail
Fits: Others ASTRO-GX, Others RX-7X, Others ASTRAL-X, Others VECTOR-X, Others XD, Others RAPIDE-NEO
uncomfortable feeling
Anti-fog Film for ULOOK VAS-V Item No. ： UL-01T01
Color; Dimmable For ASTRO-GX
OEM Pin Lock Seat (MVPin lock120) is not a problem. I was told that dimming is determined by the amount of UV light, but it is winter so I could not check.
View detail