Reviews
Sound signal for motorcycle Alfer II Silver
Good sound, everyone can hear and pay attention on the road. There is a feeling of security: they will hear and see. Beautiful, chrome, looks good on my black motorcycle. -------------------------------------------------- -------- Good sound, everyone can hear and pay attention to the road. There is a feeling of safety: hearing, they will see. Beautiful, chrome, look good on my black motorcycle. Powered by Google Translator View detail
Low Cost and Highly Effective Large
[How is it used?
The sound of OEMHorn was so pitiful that we hesitated to use it even when avoiding danger, so we replaced it for safety reasons.
Was the one you received as per Image?
I feel that it is a little too large for a compact motorcycle, since there is not enough space on a modern motorcycle to attach extra items. In particular, it is quite thick.
Was the installation difficult?
There was nothing difficult as all I had to do was remove the NORMAL and replace it with the OEM Bracket.
How was your experience with it?
It is a world of difference compared to the pathetic sound of the OEM. Pow." I was satisfied with the sound, which was like a wind instrument, and I chose Hi after listening to both Hi and Low, and it was the right choice.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Size (especially thickness) is Large tight. In fact, Hi and LowQuantity:I wanted to add a set, but I gave up because it was too large and too conspicuous, and it seemed to have a negative effect on the cooling system in front of the radiator.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Is good
Since it is a standard AlphaHorn, the tone echoes EuropeanSound.
It sounds far better than NORMAL.
It is not too large and can be placed anywhere.
View detail
DoubleHorned with OEM UCH-201 and this product.
[How is it used?
The HornUCH-201 of the car body Standard Equipment and this product make the DoubleHorn of the tone High and Low.
If you use a bracket that is not included, you can fit this product inside the Shroud and make it waterproof.
Was the installation difficult?
The selection of the bracket for the Other Brand Product and the installation of the HornRelay requires the removal of the Shroud and Cowl, so it becomes a little complicated.
How was your experience with it?
DoubleHorn has become a powerful Horn like a car and shows its power.
[Included Parts:were they on?
One Side Flat Female Terminal Cord is Quantity:It comes with 2pc.
[ITEMS TO BUY TOGETHER
Quantity as Horn1pc.3.5A consumes:2pc. Set consumes 7A, so I added an external HornRelay.
HornRelay harness is the same Manufacturer's Horn harnessQuantity:You can purchase Set SZ-1133 for easy Wiring.
We were quoted and purchased from Webig's quotation system as it was not one of Webig's standard products.
View detail
feeling of having done something
I installed it on my ESTRELLA. I didn't like the look of the brackets so I made my own brackets. The sound is low so it's not too loud. View detail
feeling of having done something
I installed it on my ESTRELLA. I didn't like the look of the brackets so I made my own brackets. The sound is low so it's not too loud. View detail
The classic AlphaHorn
Speaking of Horn, isn't this the one that many people say it is?
I'm happy with the so-called standard tone and sufficient volume.
We chose the Slim type due to the installation location, but the sound quality and volume is comparable to the STD type, so we recommend this product for those who are having trouble with the installation location.
Wiring is not particularly difficult, and an example of wiring diagram is written in the Instruction Manual of Package, so I think this is a kind point.
View detail
very fast delivery.very good quality and very easy to install.nice (low)sound for my bike.I will recommand this product.
very fast delivery.very good quality and very easy to install.nice (low)sound for my bike.I will recommand this product. View detail
Farewell to the miserable sound
Horn of V-Strom was unbelievable sound and it was embarrassing to ring, so I knew it was a good Horn and it was a story that I met with this Horn.
The attention was paid to POP with Exactly on a minicar, and as you watched it sounded quiet and volume.
Of course Size never said in Compact.
It's easy to install, and when you peek from the side it makes your face look a little outrageous.
Because I did not buy Relay, I was worried about volume and Fuse, but there was no problem.
There was only Hazard in the communication of Motorcycle, but Horn also joined this.
It's easier than Hazard, so recently it's ringing Horn.
View detail
It also sounds with Compact
It fitted well in a very narrow place of BANDIT 250.
Normal out of the missing sound of Ma!
Even if you run a horn, I do not feel embarrassed.
Car also noticed Safety also UP ↑ (^-^)
OK, remove the OEMHorn and pull the cord a bit!
Bracket Included Parts : Bending and fitting.
View detail
GSR250 Mistuba ALPHAII
【Why did you exchange Horn?】
In Indonesia, there are many motorcycles in rabbit, lane change is not polite like in Japan. I thought that installation of Horn which is conspicuous also to inform the opponent of my whereabouts is an urgent thought I exchanged from OEM to Mistuba.
【Why did you choose MistubaHorn】
Previously, because I was using cars and I liked the sounds themselves.
There is no elongation of the scale as young people DQN is ringing, which is fun ~ ♪, it is a short and powerful Simple sound with fans!.
Mistuba Sancoa's HP http : / / www. mskw. co. jp / car / car-horn / mbw-2e17
There is also a Sample sound, but actually it is more bass sound.
And there is only Manufacturer which is also adopted for OEMHorn and reliability is outstanding. I will replace my car or Motorcycle before Horn is broken (^^;)
[About installation]
In the case of GSR 250, OEMHorn's fixed Bolt (10mm) Just pulling out the flat terminal of Plus minus and replacing Mistuba's Horn in the same way completes the replacement itself.
However, in this method, water will accumulate in the flat terminal Cover, so it is better to slightly extend Wiring and turn the Elbow side of the flat terminal Cover downward.
There is a note in the Instruction Manual, but I should not loosen the fixed Bolt of Horn and Bracket. Depending on the type of car, you may wish I could change the installation angle of Bracket for a bit more.
【Impression after installation】
I did not feel that it was such a big loud sound as it was in a car because it was in the car, but with Motorcycle 1. I feel it sounds like Large about 5 times. I think that it was not heard much by car people if it was an OEM's Horn, but I think that this would make Appeal sufficient existence. The appearance may be inconspicuous because the OEM 's Manamaru BlackHorn is integrated with Motorcycle.
In areas and environments where it is necessary to sound Horn it was sufficiently meaningful.
View detail