Reviews
If you are looking for cheapness, this is it.
Product Name
BATTLE FACTORY Battle factory Balance weight
Item Number
BA00-033
Vehicles
MT-09 ABS (8BL-RN69J) 2021
Number of man-hours
5 minutes (when attaching Tire replacement)
Required Tools
Torque wrench, hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers, etc. would be perfect (when changing tires)
Why did you choose this product?
Because it was necessary for balance adjustment at the time of Tire replacement.
Was the one you received as per Image?
It was as per Image. It was more frugal than I expected.
Was the installation difficult?
It is not particularly difficult, since all you have to do is stick it on. Cutting may be difficult with ordinary scissors.
How was your experience with it?
It is difficult for the layman to know if Balance has been taken. It is a matter of feeling.
[Included Parts:were they on?
None in particular
[Was there anything that disappointed you?
I would have been happy with Black color.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Battle factory back steps
I have installed this nice products. It works perfectly. I have no complaints and shipment on time. Thanks so much. I am recommending Webike for you. View detail
WheelBalance
Used for Tire replacement. Black color would be nice. View detail
It's consumable.
Footpeg will almost certainly be damaged if it falls over on Circuit
Mounting ScrewM8 P1.25 is the most universal, so it is just right to have as a Repair
Quantity:1 Set of 2pcs. 3000 yen would be great for me personally.
View detail
Relatively inexpensive
If you roll in Circuit, Footpeg is almost always bought in one fell swoop.
Less than 2000 yen per unit is, well, helpful.
View detail
Racer's standard
The bar of the Rear Sets I bought was too long and caught too much, so I bought it because the operability was not good. 。 It is good to be able to purchase at any time. View detail
Bar only
I use the M10P1.5 selection for two cars I own. If one of them is damaged, I can use it again. Also, in the event of a fall, it will be completely gone or taken to the Plate. "Make it hard to become one." As with the Levers, a hole is drilled around the 1/3 tip of the bar so that it breaks off first. View detail
Stainless Steel Change shiftArm
Various Sizes (length) The stainless steel material is also strong enough.
It can be used for Universal's Ball jointM6 and I use it for CUB's Rear Sets.
View detail
Boots is quite a bit of a bite.
Bites on Boots.
Of the several footpegs I have, this is the one that bites the best.
View detail
Fits: HONDA CBR1000RR, HONDA NSR250R, KAWASAKI NINJA2 Helmet50RR, HONDA RS125, HONDA RS250, HONDA NSF250R, HONDA VTR250, YAMAHA YZF-R1, YAMAHA YZF-R6, KAWASAKI ZX-6R, SUZUKI GSX-R600, SUZUKI GSX-R1000, Others
BATTLE FACTORY Bat LuremQuantity:Set
I use it because it is non-slip and holds well. Boots hang well on the tip, so it is easier to hold. View detail
Battle factoryChange arm
There are two mounting holes for LINK and a good selection of ShiftStroke.
The finish is very beautiful.
View detail
Battle factoryOEM
Stud bolt for Battle factory footpeg.
Required for Footpeg installation.
It's a good thing to have something because it's a part of the body that is often broken.
There is no such thing as faster if you put it on.
View detail
Tire replacement!
I bought the Whole Balancer because it is a necessity.
It was easy to apply with double-sided tape.
I have so much, so little...
View detail
With the installation of the fake Rear Sets
When I installed KIJIMA footpeg relocation bracket on Z900RS, the length of OEMShift rod was not long enough to adjust the height of Shift Pedal, so I purchased M6-150mm.
I was able to adjust it to the proper angle (height). However, the length could have been 140mm.
When I first received the screws, they did not fit properly and I wondered if I had made a mistake with the size, but the direction was the other way around.
I honestly wish the price was a little lower. But the product is Material:It is Stainless Steel and the texture is not bad.
View detail
of good quality
Bagfootpeg location, with replacement, ROD not long enough
Purchased
The quality is stable and can be installed without any mistakes.
I use it in Race, but I remember it bending over in a fall.
No, sir!
We recommend that you check the length carefully before purchasing.
View detail
Battle factory Stainless Shift Rod M6
We selected a 120mm Shift rod to accommodate the Automatic shifter.
Thanks to your help, we are now 90° to the Change arm.
View detail
I feel safe, but...
Since it is an operating part, I purchased it with a sense of security.
Trust, peace of mind, but pricey!
The construction is good, so I guess it can't be helped...
View detail
Essential Items when replacing Tire
[How is it used?
I use it every time I change a tire on my Racer YZF-R25.
In a race, the front wheel balance is especially important because of the speed range.
Since my vehicle has a slightly shaken wheel due to a fall, this is an even more essential item.
How was your experience with it?
I used to use Jay Trip's Weight, but this time I went with Battle factory because they had it in stock.
To be honest, it is just lead, so there is no good or bad, but Battle factory is Shiningly more Beauty to look at.
How did it compare to other products?
It is comparable to Jay Trip. If I had to say something, I would say how easy it is to peel off the adhesive side.
This is also difficult to remove from Battle factory, and even if you pry it off, the Sponge portion of the Double-sided Tape remains.
It's better than peeling off, so that's good.
I would also like to see a Black color since Coloring is only available in Silver.
I don't mind the Racer, but when I put it on my town car, it will stand out if the wheel is black.
[Points to note]
When attaching Weight to Wheel, be sure to degrease Wheel thoroughly before attaching.
Failure to degrease the adhesive part of Weight will weaken it, and it may peel off and fly away during driving.
I am lowering the Risk of skipping by dewaxing→pasting→Black adhesive Tape on top of the Weight.
I see that all the vehicles that run on Circuit are reinforced by taping on Weight.
View detail
Posh Footpeg Up Plate replacement from attached ROD
The Posh Footpeg Up Plate was installed from the time the vehicle was purchased, but as many people have said, using the included ROD, the 2nd and 3rd positions can only be used by shifting the Piece on the Mission side, and with that, the lever position adjustment is not wide enough, and furthermore, the shift change intervals around 5th and 6th gears are not comfortable. In addition, the shift change interval around 5th and 6th gear was not comfortable, so we replaced it.
The length of the ROD was arranged in advance according to the lever position to be determined, so after installation, the ROD can be used at any position on the Plate.
The price is reasonable because I can arrange for a specific length, and the precision of the screw cut is perfect with the stainless shaft.
View detail
Shift rods are usually Normal Thread Screw and Opposite Thread Screw.
I ordered it thinking that it might be Normal Thread Screw and Opposite Thread Screw because it is a Shift rod. I thought it was okay if I could not adjust the rod end by diverting it, and it was also troublesome to buy an additional rod end, so I purchased it based on an amateur mistake.
I ended up buying Stainless Steel round steel and made it myself. It ended up being very cheap.
View detail