Reviews
If you are looking for cheapness, this is it.
Product Name
BATTLE FACTORY Battle factory Balance weight
Item Number
BA00-033
Vehicles
MT-09 ABS (8BL-RN69J) 2021
Number of man-hours
5 minutes (when attaching Tire replacement)
Required Tools
Torque wrench, hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers, etc. would be perfect (when changing tires)
Why did you choose this product?
Because it was necessary for balance adjustment at the time of Tire replacement.
Was the one you received as per Image?
It was as per Image. It was more frugal than I expected.
Was the installation difficult?
It is not particularly difficult, since all you have to do is stick it on. Cutting may be difficult with ordinary scissors.
How was your experience with it?
It is difficult for the layman to know if Balance has been taken. It is a matter of feeling.
[Included Parts:were they on?
None in particular
[Was there anything that disappointed you?
I would have been happy with Black color.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
It's consumable.
Footpeg will almost certainly be damaged if it falls over on Circuit
Mounting ScrewM8 P1.25 is the most universal, so it is just right to have as a Repair
Quantity:1 Set of 2pcs. 3000 yen would be great for me personally.
View detail
Relatively inexpensive
If you roll in Circuit, Footpeg is almost always bought in one fell swoop.
Less than 2000 yen per unit is, well, helpful.
View detail
Racer's standard
The bar of the Rear Sets I bought was too long and caught too much, so I bought it because the operability was not good. 。 It is good to be able to purchase at any time. View detail
Bar only
I use the M10P1.5 selection for two cars I own. If one of them is damaged, I can use it again. Also, in the event of a fall, it will be completely gone or taken to the Plate. "Make it hard to become one." As with the Levers, a hole is drilled around the 1/3 tip of the bar so that it breaks off first. View detail
Stainless Steel Change shiftArm
Various Sizes (length) The stainless steel material is also strong enough.
It can be used for Universal's Ball jointM6 and I use it for CUB's Rear Sets.
View detail
Boots is quite a bit of a bite.
Bites on Boots.
Of the several footpegs I have, this is the one that bites the best.
View detail
Fits: HONDA CBR1000RR, HONDA NSR250R, KAWASAKI NINJA2 Helmet50RR, HONDA RS125, HONDA RS250, HONDA NSF250R, HONDA VTR250, YAMAHA YZF-R1, YAMAHA YZF-R6, KAWASAKI ZX-6R, SUZUKI GSX-R600, SUZUKI GSX-R1000, Others
BATTLE FACTORY Bat LuremQuantity:Set
I use it because it is non-slip and holds well. Boots hang well on the tip, so it is easier to hold. View detail
Battle factoryChange arm
There are two mounting holes for LINK and a good selection of ShiftStroke.
The finish is very beautiful.
View detail
Tire replacement!
I bought the Whole Balancer because it is a necessity.
It was easy to apply with double-sided tape.
I have so much, so little...
View detail
of good quality
Bagfootpeg location, with replacement, ROD not long enough
Purchased
The quality is stable and can be installed without any mistakes.
I use it in Race, but I remember it bending over in a fall.
No, sir!
We recommend that you check the length carefully before purchasing.
View detail
Battle factory Stainless Shift Rod M6
We selected a 120mm Shift rod to accommodate the Automatic shifter.
Thanks to your help, we are now 90° to the Change arm.
View detail
Posh Footpeg Up Plate replacement from attached ROD
The Posh Footpeg Up Plate was installed from the time the vehicle was purchased, but as many people have said, using the included ROD, the 2nd and 3rd positions can only be used by shifting the Piece on the Mission side, and with that, the lever position adjustment is not wide enough, and furthermore, the shift change intervals around 5th and 6th gears are not comfortable. In addition, the shift change interval around 5th and 6th gear was not comfortable, so we replaced it.
The length of the ROD was arranged in advance according to the lever position to be determined, so after installation, the ROD can be used at any position on the Plate.
The price is reasonable because I can arrange for a specific length, and the precision of the screw cut is perfect with the stainless shaft.
View detail
Convenient
Since the length can be selected in 10mm increments, I measured the length I needed and purchased it. View detail
Installation Battle factory bar!
[How is it used?
In use for shopping, wandering, etc.
This time the stick used as Shift LinkageROD
Was the one you received as per Image?
Yes, sir!
Was the installation difficult?
No! There was no difference between the OEMShift rod and the installation.
How was your experience with it?
The quality and processing accuracy are good.
There are some spiral cutting marks on the shaft, and it seems to be made by lathe.
Large change is beautiful!
[Included Parts:were they on?
No, sir! There's nothing on it.
It's unlikely to be there in the first place.
[Was there anything that disappointed you?
That didn't happen either.
Other items that would be helpful
Point and hang of installation
As long as the Female Screw in the pillow is sound, you only have to screw it in.
[Availability and clarity of the Instruction Manual
No! (You don't need it in the first place. People who don't understand the structure don't buy these things.)
[Notes]
Be careful not to select the wrong ROD length.
These are the parts that will be needed if you start to modify the Shift relation without permission.
If your car has no abnormality or dissatisfaction in the current situation, you will not know the effect of replacing it.
In a bad way, it's just Shaft for Shift.
NORMAL is considered to be steel, but it is the result of being required to be able to bend without breaking and cutting in the event of an emergency such as a fall.
This is Material:It is made of Stainless Steel and hard, so it is difficult to bend and may break (don't get hurt!)
It is not a violation to use it on public roads, but it must be used with a good understanding.
You can buy a longer one and cut it to adjust it (though it's hard because it's Stainless).
[ITEMS TO BUY TOGETHER
M6StainlessNut and M6Left Screw StainlessNut if you want to have different colors.
[Opinions and requests to Manufacturer
It's a little pricey (crying)
View detail
Fits: APRILIA RSV1000, HONDA CBR250R, YAMAHA YZF-R6, YAMAHA YZF-R25, KAWASAKI ZX-6R, SUZUKI GSX-R600, HONDA NSR250, HONDA CBR600, HONDA CBR600RR, HONDA CBR900RR FIRE BLADE, HONDA CBR929RR FIRE BLADE, HONDA RVF750, KAWASAKI NINJA2 Helmet50 , KAWASAKI NINJA2 Helmet50R
Increased strength
I use it on Universal and it has increased in strength.
Shift feeling is also improved.
View detail
Secure Grip
The Edge of the Knurl is standing and has high Grip power.
The Sole of the shoe is more susceptible to Damage, but I don't care because the Merit is a Large threshold.
If the screw hole size, pitch and width are correct, we recommend replacing the footpeg with another manufacturer's footpeg.
View detail
Fits: HONDA APE 100, HONDA APE 50, HONDA NSR mini, HONDA XR100MOTARD, HONDA NSR50, Others
Non-slip and cheap
[Installation, Accuracy]
I bought it as Repair Parts for the other company's Rear Sets, because the screw diameter is M8 of course For use with a wide range of manufacturer's footpegs There is no looseness due to vibration
[Shape and feel]
There is also another Review is very slippery in the rough Knurl process of Knurl, once you use it, you can use other I can't go back to Footpeg lol
That's why the Boots are depleting so much …
[Quality/Cost performance]
The DURACON part of the tip looks like it has a slider effect, but once it falls over LargeIt's actually Conforms to Japan Race as it caves in behind the bar I thought it would be better to think of it as just a Cap for Regulation
It is cheaper and less slippery than the other companies' Footpegs, and the practicality and cost effectiveness are I think it's a good idea
Most of the other companies' products are Anodized Color and will come off after riding Battle's products are basically Aluminum Ground bare skin, so you don't have to worry about the color baldness Also
View detail
Purchased for use with the Footpeg Plate
Footpeg Plate was installed on a 2006 Kawasaki ZZr250
I bought the 170mm of this product because the Change rod that came with it was too short
View detail
It was as good as I thought it would be
I installed it and it felt good, but now I'm waiting to remove it and install it on my other motorcycle It would be even better if the price was a little cheaper, but it will be difficult View detail