Reviews
The faster the Situation, the more important it is.
[How is it used?
I used it to replace the tires on my Racer motorcycle.
Was the one you received as per Image?
It is a weight, so it did not differ from Image.
It is surprisingly soft to the touch and can be bent to fit the curved surface of the Wheel.
Was the installation difficult?
Balancing the Wheel is tough without a Balancer.
If you don't have the environment to take the balance yourself, it is safer to let the store do it for you.
How was your experience with it?
The Balancer itself is designed to be attached with Double-sided Tape, but I put more Tape on top of the paste. When I tried to remove the tape when replacing it, it was very sticky, so I didn't feel like it would come off easily.
[Included Parts:were they on?
nothing special
[Was there anything that disappointed you?
nothing special
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: APRILIA RSV1000, HONDA CBR250R, YAMAHA YZF-R6, YAMAHA YZF-R25, KAWASAKI ZX-6R, SUZUKI GSX-R600, HONDA NSR250, HONDA CBR600, HONDA CBR600RR, HONDA CBR900RR FIRE BLADE, HONDA CBR929RR FIRE BLADE, HONDA RVF750, KAWASAKI NINJA2 Helmet50 , KAWASAKI NINJA2 Helmet50R
Increased strength
I use it on Universal and it has increased in strength.
Shift feeling is also improved.
View detail
Secure Grip
The Edge of the Knurl is standing and has high Grip power.
The Sole of the shoe is more susceptible to Damage, but I don't care because the Merit is a Large threshold.
If the screw hole size, pitch and width are correct, we recommend replacing the footpeg with another manufacturer's footpeg.
View detail
2001 R6Front Fender
The existing Fender did not have 10mm clearance between the 120/60-17in.
The Fender that I replaced had a gap of about 15mm between 120/70-17in. and the Warmer as shown in the picture.
I was able to install it with room to spare.
View detail
Fits: HONDA CBR1000RR, KAWASAKI NINJA2 Helmet50RR, HONDA RS125, HONDA RS250, HONDA NSF250R, HONDA CBR600RR, HONDA VTR250, YAMAHA YZF-R1, YAMAHA YZF-R6, KAWASAKI ZX-6R, SUZUKI GSX-R600, SUZUKI GSX-R1000
Perfect for Repairing Rear Sets!
I always have one set as a repair for my race car.
Knurl also grips well with Sugar Crystal, so you can get a good grip. Recommendation Footpeg.
If you get rid of it, rotate the Footpeg to get a clean surface and the Grip will come back.
It tipped over a few times, but it did its job as a solid Slider without breaking!
It's not expensive and it's a Recommendation product.
View detail
I like that you can choose the length
I bought it because I diverted the 15R1 Rear Sets Kit to 18R1
I like that you can choose from a variety of lengths
However, it is still the ground of Aluminum, so if you can choose the Spec. of Anodized, it will look I think the
View detail
one
It was hard to assemble it to the Handlebar But it is too hard I missed it again:I didn't know it was 1pc A simple explanation is needed View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R3
Kevlar is cool!
I installed it on my YZF-R25 to do a race
As expected from the Battle Factory
It's accurate and looks GOOD!
I've fallen over a few times, but they protect me well!
View detail
Ideal for changing the length of the shift rod
I bought it because I wanted to change the length of the Shift rod when I changed the position of the pedal
To begin with, STREET TRIPLERS has a Quick shifter It will be Standard Equipment, but Babyface's Rear Sets have a The Shift rod that came with the replacement did not take into account the Shift Switch I would like to replace the Shift Rod with one that matches the Shift Switch on it I found a Shift rod made by the Battle factory
I don't think it was originally intended to be combined with other companies' products, but the Large body vehicle The Pillow ball on the Shift Pedal has an M6 thread diameter, so it can be installed There was no problem
Moreover, you can choose the length from 80mm to 300mm in increments of 10mm to match your vehicle's specifications You can also choose the length you want to order according to the spec. of your vehicle
It should have been ordered by the Manufacturer as Repair Parts This is the only product sold as a universal product There's only one, so you can save yourself the trouble of ordering
Personally, I trust the fact that it's made by the Battle Factory, a familiar name in road racing Factor
However, as you can see in the description, it is a product that only cut a screw hole in the hexagonal bar of Aluminum (see ROD's Center is cut-out, but …) is 1 pc2, It's a bit awkward to spend more than 5,000 yen, or 3,000 yen for a long rod Other companies' Shift rods are sold for around 1,500 yen, so if the length is right, you can buy a different one There are also cheaper products at
Also, since this is a function-first product, it is only available in the bare aluminum color Recently, the number of footpegs painted by Anodized is increasing, but Shift rod If your shifter is painted as well, you may find that the shifter rod is more noticeable as shown in the picture The original color of the Shift Rod was Black
View detail
Fits: HONDA APE 100, HONDA APE 50, HONDA NSR mini, HONDA XR100MOTARD, HONDA NSR50, Others
Non-slip and cheap
[Installation, Accuracy]
I bought it as Repair Parts for the other company's Rear Sets, because the screw diameter is M8 of course For use with a wide range of manufacturer's footpegs There is no looseness due to vibration
[Shape and feel]
There is also another Review is very slippery in the rough Knurl process of Knurl, once you use it, you can use other I can't go back to Footpeg lol
That's why the Boots are depleting so much …
[Quality/Cost performance]
The DURACON part of the tip looks like it has a slider effect, but once it falls over LargeIt's actually Conforms to Japan Race as it caves in behind the bar I thought it would be better to think of it as just a Cap for Regulation
It is cheaper and less slippery than the other companies' Footpegs, and the practicality and cost effectiveness are I think it's a good idea
Most of the other companies' products are Anodized Color and will come off after riding Battle's products are basically Aluminum Ground bare skin, so you don't have to worry about the color baldness Also
View detail
It's normal
Personally, I don't like the plain old Bar End, so I used KIJIMA's But because I wanted to make the end shorter in combination with Grip, I installed it If old-fashioned Racer is preferred, it is Recommendation However, whether it is expensive View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R3
I'm so cool!!!!!
Case cover made of Kevlar Fiber
It's so cool
If you install it as it is, it will crack and go away when it falls over, so the Double- it was installed with sided tape
In addition, I used instant glue to protect the cross-section of the fiber as it may peel off or grow moldy if it gets dyed by water re
View detail
Fits: HONDA CBR1000RR, KAWASAKI NINJA2 Helmet50RR, HONDA RS125, HONDA RS250, HONDA NSF250R, HONDA CBR600RR, HONDA VTR250, YAMAHA YZF-R1, YAMAHA YZF-R6, KAWASAKI ZX-6R, SUZUKI GSX-R600, SUZUKI GSX-R1000
I'm a cosmo!
I'm using my WR250X for road race with North Line Rear Sets. It is. I bought this product from Repair because the Footpeg is always damaged when it falls over.
It feels fine in use and grips without slipping in a little rain.
I can recommend it because it's cheap.
View detail
Purchased for use with the Footpeg Plate
Footpeg Plate was installed on a 2006 Kawasaki ZZr250
I bought the 170mm of this product because the Change rod that came with it was too short
View detail
It was as good as I thought it would be
I installed it and it felt good, but now I'm waiting to remove it and install it on my other motorcycle It would be even better if the price was a little cheaper, but it will be difficult View detail
Fits: HONDA CBR1000RR, KAWASAKI NINJA2 Helmet50RR, HONDA RS125, HONDA RS250, HONDA NSF250R, HONDA CBR600RR, HONDA VTR250, YAMAHA YZF-R1, YAMAHA YZF-R6, KAWASAKI ZX-6R, SUZUKI GSX-R600, SUZUKI GSX-R1000
Large strange good!
I am using Rear Sets manufactured by another company, but since Footpeg wears down, I replaced it. It feels like Knurl gets caught coarse! After that we feel that water does not collect well in the longitudinal groove and the rainy day!
When you exchange again it is a rule to kore!
View detail
Fits: HONDA NSR250R, HONDA NSR250R, HONDA NSR250R, HONDA CBR600F, HONDA VTR1000FVTR1000F FIRESTORM, HONDA CBR400RR
Moderately
Immediately after arrival, wearing. Although it is written in the explanation, since it is universal, the hole for the anti-rotation must be processed additionally, but it can be poured.
Handlebar itself is light, texture is not bad.
Since the hanging angle is different from the OEM, it comes into contact with Cowl, so adjustment of that side is necessary.
View detail
I am satisfied with the appearance as well as the texture!
I also considered other Manufacturer's items, but I chose Battle factory's.
I am satisfied with the products as expected.
Delivery date arrived at hand as soon as possible about 1 week from the schedule.
View detail
footpeg for position change.
When buying Set Back Plate on footpeg, because it is not long enough to purchase.
Texture is good.. Assembling is 10 mm, but as the Asahi FlareWrench could be used it is Recommendation. FlareWrench is harder to lick with force than Spanner.
View detail
Fits: HONDA APE 100, HONDA APE 50, HONDA NSR mini, HONDA XR100MOTARD, HONDA NSR50, Others
It is highly appreciated
It is the shortest bar among a number of Footpeg BarManufacturer, it is 10 mm shorter than last time, it got better not to slip and get caught well, it is easy to get on, Bolt size can be attached to other footpeg, if it is short after installation If you feel it can be adjusted with Color, high quality at low price View detail