Reviews
Fits: KAWASAKI Ninja H2, KAWASAKI Ninja H2R
Bolt does not fit
Processing essential
It's a manufacturer famous for its price tag that only comes off when it's not processed.
View detail
I received a product that was in the process of being created.
After waiting for almost half a year for a made-to-order product, I received a product in the process of being processed. After waiting for almost half a year for a made-to-order product, I received a product that was still in the process of being processed. The quality of the product was poor, and I was disappointed.
First, the shape of the product was supposed to be a cutting that arcs up and down at the chain tensioner, but it is not right. Second, the cutout at the bolt fastening point that fixes the chain cover extending from the OEM rear fender is still ruled in and not machined! We had to shave it off here.
If you can't make it right, don't sell it! Shame on you!
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
Product quality is the worst Level
After 5 months of ordering, it finally arrived and when I carefully unpacked it, it was covered in scratches. I am so disappointed. Don't they inspect the product before packing it.... It is a regrettable Manufacturer. I can't recommend them at all. View detail
Garbage too much grass.
The body is wrapped with PetitPetit, and the cushion is laid firmly, but when you open it, you see the wound.
Is this the fault of the carrier or the manufacturer…?
I was so dismayed by the workmanship that I wondered if I would be embarrassed as a PRO if I had been in this situation at the manufacturing company stage.
There is no Instruction Manual and I don't know how to attach it.
Also, although I can understand a slight error in handmade, the hole position is gapped 15mm from the center, and I am not sure if it can fit in there or not.
Garbage or Garbage? Are your eyes knothole? Are you ashamed of yourselves as PROs? It's a bit like a scam!
View detail
Don't touch it out of curiosity.
Mounted on NINJA2 Helmet 50RR.
The wall thickness is considerably thinner than that of the OEM, but the stiffness and strength are not hampered by this.
However, I would recommend that only those who are capable of machining Carbon should purchase this product, as there is a hell of heavy machining waiting for some products.
I mean, it's so much more difficult to process than FRP that I can say to anyone, I don't recommend it.
View detail
Material:What is the quality of FRP products?
I purchased the Under Cowl Tray for my ZX-10R and it arrived today!
When I opened the item, I saw a long scratch ・・・・・ and the uncolored part looked like a scratch.
Even assuming painting, I think it will inevitably look different in areas where light passes through and where it doesn't, but Material:What is the quality of FRP products like?
I'm a little disappointed.
View detail
It can be installed without any trouble.
Texture and accuracy are not as good as they are cheap.
I can install it for the time being, but I would have preferred to keep the OEM version instead of changing it.
View detail
Accuracy is quite poor.
Fitting is good on one side, but the other side is the worst fitted, and no matter how much double-sided tape is used to reinforce it, the surface is not in contact with the car body side, so it peels right off.
The carbon is not flexible enough to be used as a sticking point, and it fell twice while running.
The delivery time was quite long and the delivery schedule was postponed twice, so I can only say that I am disappointed.
View detail
Is this a guarantee of conformity?
What is the conformity guarantee for this product?
Made by A-TECH yzf -r1 4xv Fender Eliminator cannot be installed, but I was prepared to have to do some modification, but there are some parts (distortion, etc.) that cannot be modified due to the specifications other than those shown in the photos.
View detail
Quality not commensurate with price
To be honest, I can't say that the QUALITY is commensurate with the price.
The Screw holes do not match and the Bolt that comes with it is obviously too short.
The screw holes were not aligned, so I installed it forcibly, and the Crack was easily inserted.
Well, it is a handmade product, so accuracy may not be a problem, but I thought I would never buy A-TECH's parts again.
View detail
Isn't the error too Large?
The mounting holes did not fit at all, requiring considerable modification.
Seat baseRight rear hole extended to the Level where Washer is not available.
Therefore, I have been pondering various methods of fixing Bolt.
The base of the pedestal must also be machined considerably, or the load on the Seat Cowl will be Large and I think it will crack eventually.
I think it will be very scratchy, so if you can't separate the two, it is safer not to do it.
View detail
UnderCurl
I was delighted when the item arrived in mid-July when it was due in November!
When I saw the item, I thought it was used.
Most of the corners were White with the paint peeling and Black paint.
View detail
I ordered the Full Exhaust System for the pi... 。。。。。
The one not for Full Exhaust System pie arrived.
but the wait was so long that I gave up on returning and exchanging the product.
However, the custom feeling was UP.
View detail
The transparent Screen portion is unreachable.
I received the Carbon mounting base.
[Color] The Screen portion of Clear is not included and cannot be used.
The delivery date was originally scheduled to arrive in February, but was suddenly changed to June;
but arrived today (April 10).
When checked upon arrival, the Screen was not included.
If the product has a long delivery time, the contents should be properly checked and shipped.
I will not buy any more products from this Manufacturer.
View detail
The estimated date of arrival has passed?
It's past the expected delivery date, will it still take longer? View detail
6 months
How is it that you can't cancel the order in 6 months? View detail
Difficulty in molding?
It's beautiful when you look at it when it arrives, but when you try to install it...
Quantity:Pair (for Left and Right) The degree of coverage is blatantly different in
Quantity:Pair (for Left and Right) Both of them are deformed due to the lack of thickness of the product on the bottom side of the Mirror, resulting in a very large gap.
It doesn't bother me when I look at it from the front, but from the straddle position, this gap always bothers me and makes me feel disappointed.
I regret that I should have spent a little more and got the Carbon Mirrors.
View detail
It's been six months and I still haven't received it! I haven't heard from you!
Just when I thought the item wouldn't arrive past the estimated delivery date, the estimated delivery date was changed three times and it still hasn't arrived! (about 6 months)
No communication from Webig about the delay and no cancellation.
View detail
It's been 3 months since I placed an order and I still haven't received the product.
Three months after I placed the order! The product arrived too late. View detail
I've been waiting 5 months and still haven't received it.
I ordered it and have been waiting for 5 months and still haven't received it.
I wonder how long I have to wait before I can do it.
View detail