Reviews
It is as good as expected.
Fit the Radiator exactly as shown in the photo.
I think it is quite decided.
It would be helpful if it is mentioned in the Instruction Manual.
View detail
The Chain Cover part is squishy.
The delivery time took a large amount of time, and I was eagerly awaiting the arrival of the product.
The cover part at the top of the chain is so squishy that it makes me wonder if it is really sturdy enough to hold a large bag.
It looks good on the carbone, but it may be partly because of its design.
Personally, I regret a little that OEM would have been sufficient.
View detail
It's okay.
good point
The shape is good, the parenthesis is good because it is Carbon, and the weight is not much different because it is Carbon, even though it is now Large.
A bad point
It's carbon, so it's gapped, but there are places where it's gapped almost to the point of a single hole.
[Color] Some areas of Black paint mixed in with Clear.
The delivery date is completely unreadable.
View detail
Since the tank pad with wide breadth was looked for, the tank pad of this a-tech was used. The size was felt as about 90% of result for carbon. However, it is dry carbon, and it is very beautiful and attachment is also easy. It is satisfactory
Since the tank pad with wide breadth was looked for, the tank pad of this a-tech was used.
The size was felt as about 90% of result for carbon.
However, it is dry carbon, and it is very beautiful and attachment is also easy.
It is satisfactory if PITTASHI is not expected to a tank 100%.
It will be *5 if OK is thought at about 80%.
View detail
Processing assumptions?
The position of the screw holes did not match, which may have been an individual product difference, so I used Leutor to shave them down to match. View detail
Maybe I need a washer?
A heat-resistant SoftWasher is recommended to prevent wobbling. View detail
High degree of difficulty to install
It cannot be mounted normally.
You should be prepared for a lot of processing.
Instruction Manuals are not very helpful either, so you have to figure out how to fit them yourself.
It is certainly lighter than the OEM PlasticCowl when you hold it, but when you ride it, it is no different.
The appearance is Carbon, so it is not half as luxurious as it looks.
It's a look equipment.
View detail
Shorter stud bolt
sv650a 2017. shorter than swing arm width. about 3cm. i had to buy, cut a stud bolt to install. fortunately the bolt is standardized product, so DYI was easy View detail
need to be corrected
FRP was selected because it is intended to be painted. Mounting holes can be made without modification. Overseas Material:It is better than FRP products, but there are holes, scratches, etc. If you are concerned about them, I think you need to fix the Pate. I corrected the pate. I think the workmanship is good. I am concerned about the heat effect of the engine, but I put heat-resistant Seat on the inside of the engine. It may be just for comfort. View detail
If the installed Exhaust System is incompatible, it may require a lot of modification.
It seems to be incompatible with the installed Exhaust System and required quite a bit of modification.
The design is very good and I am satisfied with it.
View detail
A little modification was required for installation.
It is not a problem if the exhaust pipe, intermediate pipe, or silencer is customized and needs to be cut down, but it is necessary to cut down the STANDReverse side because it interferes with the installation of the STANDReverse side. Why?" I thought
The paint job was quite large and odd because of the large area. Considering the finish and the time and effort required, I thought it would have been better to use painted products or carbon, so if you are not confident about self-painting, I recommend that you use that method.
I like the shape, but I guess that depends on your taste.
The Swing Arm with Stubby OVER is in good condition without Limit interference.
View detail
For summer
It looks good, but the position of the inner pin does not match, except for the mounting Screw.
Need to be machined or otherwise processed.
View detail
Screen Replacement
It was replaced from OEM. The effect as a wind shield seems to have increased because of the increased length, but the impression that can be felt is a high speed range.
Light smoke is OEM. [Color] I saw an imprecation that it was brighter than Smoke. [Color] I went with Smoke, but it might be a little darker than OEM.
It is a thing that I knew, but the front became a very heavy feeling. It's my preference, but as a styling, it might look better if it's refreshing like OEM...
The accuracy of the machining was good and the installation was not particularly confusing or troublesome.
View detail
machining
First of all, I shaved the Seat Inner and Fitting, the inside corner and Rivet hole, and installed the Tail Lamp. The position of the Nut of the Tail Lamp is gapped and it is close to One Side. I cut the rubber bush and tightened it with M10mm Washer so that the light can go into the back. It took 7 months from the product order to the product arrival. View detail
just as I thought
I used it for an Accessory Case for my teeth Brushetc. and it was just right! View detail
painful to post
It's not easy to stick, but is it hard to remove? The Sticker is a pull-out type Sticker, but when you peel off the top Vinyl after sticking it on, the Sticker floats, and if you don't do it carefully, the Sticker will break or wrinkle and air will get in. I used a needle to remove the air from the edge of the sticker where air was still left. View detail
The installation is Large strange
I asked the shop to install it because it seemed to be impossible to do without removing or supporting the Tank.
He was able to install it without any particular modification.
The Bolt next to the Battery is not the type to tighten and stop, but the Bolt is attached to the collar and it is the type to insert. I tightened it.
View detail
It's hard to stick!
I don't know if my way of applying it was wrong, but it didn't stick well.
I managed to stick it on while rubbing and warming it up for about 30 minutes.
View detail
Cool
Parenthesis is good, but I feel that the hitting is not so good. It took more than half a year to deliver and I gave it this rating. View detail
Required processing
If you want to make it universal, you should consider the bracket. View detail