Reviews
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3
usually
Style is cool, but there are not many color variations, so there are no color variations other than yellow It's tough for people who want to color But for those who like the coloring of King Kenny's rzv, a representative of Yamaha's I think it's a pretty good product with good cost performance View detail
Universal Product
This is not the Mirror for car model only, but it fits well
No processing is required, but the base of the product is different in size, so it is an OEM Product It's not as snug as
A rubber is sandwiched between the base and the rubbers, so there is plenty of vibration protection
It looks and feels much more upscale than the OEM
It is the visibility of the key, but it is about the same etc. as NORMAL, but because the position of Mirror changes, it is possible to see it in the same way as NORMAL It's a strange feeling
Since the color of Mirror is blue, I have a sense of discomfort until I get used to it
There are parts to extend the Mirror position, so I think visibility can be done in any way possible
View detail
Large satisfied
Installed on ZrX1200 DAEG
Even as an amateur, I was able to install it in less than 30 minutes
I ran it after it was installed
No scare noises, no problems
The best part is that it looks good in Parenthesis
View detail
Just like the image!
The quality and feel are both as good as Image!
Since it was a gel coating, we repeated water polishing after painting with Urethane Clear!
However, I feel that the price is a bit high
View detail
Processing required
Home-painted and mounted on a VTR250
There was no strange distortions, but in my case, the screw holes need to be widened to fit It was
Afterwards, the Instruction Manual is a little confusing because it only describes the bare essentials It's not good
The dirt around the rear suspension has been reduced and I am satisfied with the dress-up effect More places to put Sticker
View detail
Bikini and honda h4
I assess the quality of this product as good, I hoped that the product would be more rigid and the thickness of the material would be thicker. It is very light in weight, for the total weight of the motorcycle, the load is minimal, all the plastic that is used on the motorcycle by the manufacturer looks more massive and stronger. look at the sun, then the material shines through, but I think this does not affect the strength of the product, since the double weave itself is very durable. I ordered twill carbon. The product gives the motorcycle a more finished look and streamline. The photo shows a smoky screen and came transparent. I rate the quality of this product as good, I expected that the product would be more rigid, and the thickness of the material would be thicker. The weight is very light. look at the sun, the material is translucent, but I think it does not affect the strength of the product, as the double weave ulgerod itself is very strong. emost.Na photo shows the screen of smoky color and come clear. translated by Google Translator View detail
Honda h4 plow
I assess the quality of this product as good, I hoped that the product would be more rigid and the thickness of the material would be thicker. It is very light in weight, for the total weight of the motorcycle, the load is minimal, all the plastic that is used on the motorcycle by the manufacturer looks more massive and stronger. look at the sun, the material shines through, but I think this does not affect the strength of the product, since the double weave is very durable in itself. I ordered twill carbon. The product gives the motorcycle a more finished look and streamlined. After installation, the clearance has decreased, you need to move more attentively. I rate the quality of this product as good, I expected that the product would be more rigid, and the thickness of the material would be thicker. The weight is very light. look at the sun, the material is translucent, but I think it does not affect the strength of the product, as the double weave ulgerod itself is very strong. emost.Posle installation decreased clearance, you need to move more carefully. translated by Google Translator View detail
Satisfied
In the case of R, it is a change from RType, purchased to prevent scratches on the tank and to cheat the dents And my stomach grabbed... (laughs) It would be nice to have a middle ground between R and S
Due to the nature of the product [Color] There was a few pockets in Clear, but I'm mostly happy with it
It arrived about a month after I ordered
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
Dry carbon is the best!
Item Number:PMT6-MC-7
I added CarbonShaft Type6 Mirror
It said Made-to-Order 3 months and it arrived in 3 weeks (Lol)
The rubber plate between Side Mirror Base and the body of the car is included in Included Parts OEM Mirror Rubber plates are used
OEM's are easier to position because of the round holes
Because it is OEM, the Bolt that fixes the Base that was hidden will also be exposed, the makeup Bolt that was prepared separately to up the luxury factor!
Bottom line is that the OEM's vision is better, but I knew that before I bought it, so I didn't have a problem with it
More than anything else, the looks are clearly better than Carbon Mirrors
Regardless of which type you choose, if the visibility is worse than the OEM, you'll still be able to get a good look at Parenthesis I'm glad I chose the Type 6 I thought I would
Maybe the aerodynamics are good (Lol)
View detail
Cassively without Dress-up without overly claiming
Purchase Dry carbon twill type. The difference between NORMALCarbon and Dry carbon was not understood from HP of Manufacturer, but we made arrangements with Manufacturer in advance, but we immediately responded and was able to check the contents of the product. Radiator hood cover of MODEL 's DAEG in 2015 was a slightly flashy impression with a Plating part, but it was satisfying because it got a calm impression by wearing. [Color] Clear paint finish is also beautiful.
However, I had some difficulty in wearing it. The hole on the bottom side of the Hood was slightly smaller than the protruding part of the coupling part with the Radiator, and it was necessary to finely adjust the tuning by scraping by the File little by little, and so on.
The price is slightly high impression, but the atmosphere of my car is finished to my liking Large I'm strangely satisfied.
View detail
It's cheap.
In case of purchasing Z 900 RS, I got lost in Option main stand. The appearance is not good because the foot of STAND straddles the outside of the Exhaust System. I purchased this item by taking advantage of MaintenanceSTAND I was using with NINJA 2 Helmet50R. The function as Slider ??, in particular the Exhaust System side is obviously expected to be thin. It might be better to think only as Hook. View detail
I had a bad feeling on the deadline. Regarding products, we are generally satisfied.
With Made-to-Order,
After payment, we received a delivery date contact.
Although there was no contact of the delay after that, there was suddenly e-mail as soon as the day before the original arrival schedule, and it is said that a large delay occurs in the Large.
I thought that it would arrive as scheduled here, I was waiting waiting for painting and assembling.
I installed it to be in time for the autumn excursion, and intends to post that Impression here as well.
Unfortunately we did not make it..
About the change in the interaction with the Manufacturer and the change in the delivery date, I think that it is natural that your company which intermediates products will have some Time lag. Of course it is an order after accepting it as well. However, I think that it is behind in the communication from the day before becoming late.
Thanks to A-TECH many times for the indebtedness, After has also trusted with Large variety of politeness, but this evaluation will be due to the correspondence of WEBIKE this time.
Next time I would like to place a direct order.
View detail
Handmade so there are scratches on the corner
Instruction Manual Street Scars are ready.
I think it will be naturally completed by painting liquid shoe ink rather than Touch up, polishing with Dustcloth and finishing with Wax.
It is satisfactory though it is actually the second purchase.
View detail
Tightening Screw too much [Color] Clear paint breaks.
Tightening Screw too much [Color] Clear paint breaks.
I have to tighten it lightly [Color] Clear paint will peel off. Anxiety as to whether Screw will not come off by vibration.
Installation is immediate and no problem.
View detail
Rear Fender Carbonization is ImpactLarge
? 【What made you decide the purchase?】 Unlike OEM SMART shape Material : Carbon has a proper chain guard and it looks so cool.
? 【How was it actually used?】 There is no effect on running, self satisfaction when stopping is Large width up.
? 【Was it difficult to install? (Hard parts case)】 Just remove 4 Screws and close them with the attached Screw. Extremely easy.
? 【Please tell me the point of installation and hang (in the case of Hard parts)】 Attachment of Nylon washer included
? [Is there anything I was disappointed about?] Because the hole position was slightly out of alignment, there is a portion to bend.
? [Request to Manufacturer - Please let me know if there are any improvement points】 I'm glad that you can make a little more round of processing. It is a shape that can make scissors.
? 【Have you compared items?】 Magical racing's Fender. I decided on the presence or absence of Chain guard.
? [Others] OEM's Aero shape is also cool, but I think Orthodox like this shape is cool.
View detail
Design is good
Following NINJA 2 Helmet 50 R R of the previous car NINJA 2 Helmet 50 R. Attached to 2018. I love Design, but if I just attach it, Center will not be. Mounting Bracket part was shifted to Right little by little while center was released.
View detail
COOL
I waited for two months and I had a purchase. Although it is not so from the exterior, you can firmly confirm the presence from the driving posture. CarbonMaterial has no flexibility like OEM's Urethane, so it was difficult to install, but it is very good. View detail
I need a little workmanship
Delivery date arrived earlier than 2 months had been.
I bought the FRP, it was okay to keep it glowing, but painted with frosted black.
As everyone comes in contact with Tire as Imple, Washer on Chain side Quantity : 1 Set of 4pcs. Adjusted so much.
I like it..
View detail
Very good at Other Parts of Design.
Normally, most people exchange only Fluid Tank Cap,
This is a type that covers the entire Fluid Tank Type that is not in other companies Parts.
As Black Ninja 250, Fluid Tank had plastic White as a conspicuous one,
By attaching this Tank Guard, the whole is tightened with Black.
I am very satisfied..
View detail
I installed it in ZZr 1100
Finally finished painting. Installation Screw can not be installed unless it is machined at two places. There is a need for machining for the ground treatment. It would be nice if you could clear it all. View detail