Reviews
Satisfied with high quality
Fitted on a 2022 SV650X.
Motivation
In NORMAL, the Black Radiator is bare. I have no problem with the functionality of the Radiator, but it is inevitable that insects will get caught in it or the fins will be bent by stepping stones, so I bought it because I was concerned.
Installation
The normal bolt seems to be coated with screw lock material and is tight. The product dimensions are perfect, but it would be better to tighten the screws temporarily and align them carefully to ensure a good finish.
【Impressions】
I was concerned about whether it would match the pure black body, but it has no manufacturer logo, and the mesh is fine in the middle but rough on the Both Sides. Type R I chose the "Large" color, so the Both Sides are a great match in my opinion (I have rough eyes), with the Black inside standing out.
【Review】
Although it is moderately priced, it is a good product that looks good and offers good protection.
View detail
A-TECH's stable quality shines through, and in addition, you can enjoy the custom feel of the parts.
Installation is as simple as removing the plastic parts next to the radiator with two bolts and putting them back on again.
However, be careful not to lick the screw lock, which is somehow hardened even to this point.
Impact is outstanding when viewed from the front of the vehicle and at an angle.
… I thought so, but when I looked closer, I could see a glimpse of Stainless from the SIDE resin parts, which is a nice touch.
I have no complaints about the price, accuracy, and ease of installation.
If you're going to do a fair amount of high speed driving, you should have Core guard.
View detail
Increased sense of luxury
The color of the Stainless Steel matches the color of the car body, giving it a more luxurious look. View detail
The netting is too soft and difficult to replace.
The netting is soft, so when the bolt is tightened, it flattens and is not parallel to the bolt. View detail
Mounting.
Cannot be installed as is. (Quantity:Pair (for Left and Right) The square hole for the bottom hook was too small, so I had to cut it out and install it. The checkerboard pattern also looks smaller than in the picture. I am a little disappointed because I ordered and waited for a long time. View detail
sense of luxury
The color of the Stainless Steel matches the color of the car body and gives it a more luxurious feel. View detail
A-TECH's Core guard is Parenthesis good!
Little Quantity to fit the Radiator type:Pair (for Left and Right) Just angle it and replace it with 4 Bolt.
It prevents stepping stones and looks good Parenthesis!
I personally like A-TECH's Mark very much!
It was the right choice for A-TECH!
View detail
Looks good, functions...
We purchased A-TECH with the lightest weight possible to protect the Engine Case in the event of a fall.
Compared to Aluminum Cut-out ones and GBRACING, the protection performance does not look promising.
The appearance will be the best Merit.
I wonder if I will ever actually fall over and repurchase depending on the Damage condition.
For installation it is necessary to modify the holes in the product and part of the drive sprocket cover in Leutoretc.
I did not find it to be a particularly Large problem.
View detail
Radiator core guard protection
I'm posting this because there were no impressions yet. The manual is not included, but it was easy to do. I think it is better to install from the oil cooler side first. The large size is very satisfactory. View detail
Full SPLing
Duct Cowl for UpperSPL I tried to buy Fitting.
Knee Slider and others were cut in half and used, and they were able to fit uniformly, so they were not wasted.
I couldn't understand it with just one Instruction Manual and wondered if PRO could do it without shortening the time.
View detail
COSPA
About half the price of other companies' products?
It was highly accurate and easy to install.
Considering the price difference with other companies, I think this is the only choice.
Recommended
View detail
Mast Custom
I don't like anything with the Manufacturer logo, so I went with this one.
Just by removing and re-fitting the screws, even a beginner can install them, and putting them on is the first step to making Motorcycle a Large Thing.
View detail
For Radiator protection, these are the best
Installed in addition to the Fender extension on the front.
Maybe this will make Radiator Large sturdy...surely.
Mounting is done with the Quantity:Pair (for Left and Right) Simply remove and friend-tighten the Radiator cover of the
The only regret is that it is only available in Silver. since the Radiator was also in Black on a Black car body, I painted it with a Spray can to match the color.
Large sturdy, even if appropriate, for areas that are not well visible.
View detail
Wow that's cool
We plan to go full A-tech, so the core guard will be A-tech as well.
Logo is cool!
View detail
It is as good as expected.
Fit the Radiator exactly as shown in the photo.
I think it is quite decided.
It would be helpful if it is mentioned in the Instruction Manual.
View detail
It's getting cooler.
It's aluminum, so it's easy enough not to cut your hands!
ImpactLarge and cool.
View detail
Good Accent
The OEM Core guard was painted about 2 years ago, but the paint didn't last long because the rust was not removed properly and the surface preparation was not good enough. I thought about repainting it, but I thought it would rust again after a while, so I decided to replace it.
At first, I was thinking of Plain ones without Logoetc., but I chose A-TECH because of its low price.
Regarding the product, although it was unexpectedly thin, the finish was good and favorable. The precision was good and the mounting holes were Exactly. It is also finer than OEM, so it will be more effective in protecting the Radiator. I was concerned about the chatter sound, so I thought about using the anti-vibration material that came with the product, but the upper hook is folded back to the point where the core guard is effectively attached to the radiator. However, the upper Hook was folded back so that the Core guard was almost stuck to the Radiator, and the attached anti-vibration material did not seem to fit in the almost no gap. I ran a test run and did not feel any chattering sound, so I decided to use it as it was. Then, in the Instruction Manual, it says [Color] It says to clear paint it, but I'm thinking of using it as is for the time being, and then doing it together when I have a chance to paint something else.
I thought it would be better without the logo, but when I installed it, I feel that A-TECH's logo is a good accent. I guess there are people who like this kind of thing, but for me, I like it.
View detail
It's looking good.
I purchased this product to prevent damage to the Radiator from stepping stones, etc. and for the purpose of dress-up.
I like the simple design without the Manufacturer logo, so it can be defended without being too conspicuous.
Installation is easy as four screws are used to tighten the Radiator cover together.
View detail
Radiator Core guard
Good appearance.
Parenthesis is better now.
View detail
I installed it on my GSX-S1000.
It was said to be for New Model KATANA, but we installed it on our GSX-S1000. Since it was the same engine, I thought it would be large and strong, so I bought it. I was able to install it without any problem as expected. I went to Two-Ring right away and the heat went up a little, but I don't think it's a problem. The design is simple and I like it. View detail