Reviews
The design and shape are good, but the gap for the tank pad is unavoidable.
The design and shape are good, but the gap for the tank pad is unavoidable. Although I purchased the product with an understanding of this gap, it bothers me a little. View detail
The texture of Carbon is beautiful!
I bought the NINJA2 Helmet 50R for Gymkhana from a friend to cover up the scratches on my tank, but I was pleasantly surprised! The carbon texture is so beautiful that I can't help but look at it when I'm waiting at a traffic light …! It is hang to degrease properly in order to fix it! The carbon texture at such a low price! It is the best! View detail
Purchased as a spare
The last one I purchased was quite scratched and worn, so I repurchased it as a spare. This time it is twill weave.
We initially waited 8 months but received it in 6 months.
After all, delivery time for carbon parts is usually around 6 months...,
View detail
First plain weave Carbon
Carbon parts have always been twill weave, but this time, I purchased plain weave Carbon for the first time because it was in stock.
I am satisfied with the presence of Carbon parts.
Position is also improved because it is backed 50mm back!
View detail
DryCarbon Tank Cover 4 scratches confirmed
After 22 years of riding the ZX12R, the tank cover was worn and cracked, so a new one was made-to-order. We placed the order in December, and the product arrived at the end of June. When I opened the package, I found 4 scratches on the surface of the tank cover, which is the face of the motorcycle. We have just returned it to your company and asked you to reprocess it.
I have purchased about 10 A-Tech products over the past 22 years, and I was in disbelief that they would send them to USER with so much damage.
In my mind, if a product is damaged due to my mistake, I have been repairing it and protecting it with a surface treatment agent. However, this time, I was shocked when I opened the package to find that the made-to-order product was covered with scratches. I hope that your company and A-TECH will take sincere actions.
I love the tank cover, but this time I bought it for the second generation, and I think it is a good product that makes me want to own a brand new one. I think it is a good product that makes me feel the desire to own it.
In order to get the best fitting, a 5mm thick Please refer to the following comments for further information.
View detail
ZRX1200DAEG is equipped. Construction material chose plain weave carbon. Although wearing of this product was not considered at the beginning of motorcycle purchase, since there was a tendency for a small wound to be easily attached to a tank beca
ZRX1200DAEG is equipped.
Construction material chose plain weave carbon.
Although wearing of this product was not considered at the beginning of motorcycle purchase, since there was a tendency for a small wound to be easily attached to a tank because the characteristics of body color or how to ride was bad, it equipped with the broad type tank pad made from A-TECH.
what the result was very beautiful as this tank pad was manufactured by the handmade, but I purchased -- an appearance top and right and left -- it being asymmetrical and being related with accuracy -- those with difficulty -- it is -- it was the said touch.
I corrected till the satisfactory place using scissors and a file, before attaching.
There was no problem in particular about the attachment size and form over a tank.
A mounting arrangement can be well pasted up, if the double-stick tape stuck on the pad inner side outer circumference is turned over little by little, assigning a pad as it is in an instruction manual.
In particular, there is also no crevice and it was able to stick finely.
Finally, according to a body design, a gold line tape is stuck and it completes (the line tape has been removed in several days after all.).
.
.) -- since it is broad, it will be a little conspicuous, but in a meaning called tank protection, it is perfect perfect functionally.
Although there is no telling till when it can use, by suntan etc., since a price is also reasonable, it is satisfied.
although it is urethane-clear-coating recommendation with the instruction manual notation, when a manufacturer is asked, I have you explain carefully -- the present state -- even when -- it is satisfactory -- it is -- since it was things, it equipped as it is.
View detail
It's more like Race ish.
It's just a change in the look and feel of the car, but it raises tension as it sometimes comes into view while driving.
There is some hang in the installation, but no problem Level.
There is a projection on the back of OEMCover, and it meshes with Tank when it is installed, but there is no projection on this, and it did not fit completely when it was installed. However, it seems that it will not come off because it is screwed.
View detail
Prevention of scratching when getting down
It is easy to install because it is only stretched with double-sided tape. In order to prevent the Helmet from being scratched by the chin when you get down, it is installed. View detail
It's not a perfect fit.
FRPBlack Gel Coating but clean finish. I am [Color] I blew Clear and then installed it.
I bought it to prevent scratches on the Tank and to make it easier to hook my knee during Hang Off.
They both serve their purpose well.
The area for kneeling is wider and easier to attack.
The drawback is that it doesn't fit perfectly, Quantity:Pair (for Left and Right) If you put one of them together, the other side will float.
It was impossible to get it to fit snugly no matter how hard I pushed or pulled.
The thickness of the Double-sided Tape increases even more when installed, so it doesn't fit as well.
Overall, I think it's a good product.
Considering that even a Tank Pad with only the middle part costs several thousand yen, Material:I can cover half of Tank with FRP.
A little over 10,000 yen is probably a bargain for the ease of Circuit driving.
It may also prevent Gasoline from leaking out of the tank when the tank is rubbed and a hole is made.
View detail
Tank scratch-proof effect Large
I installed FRPBlack of Type S on VTR250.
I installed them on a Red/BlackTwo-tone color vehicle, so I don't think they look out of place.
Personally, I think that the pure black FRP is more compatible with the vehicle than the striped Carbon.
Because of the Type S, I didn't feel a large change in the knee grip.
This vehicle is equipped with an old and large VT engine, and the front and rear length of the engine is long due to the fate of the vertically mounted VTWINEngine.
Because of this, the Tank is also longer front to back. Also, the OEMHandlebar position is farther away.
Because of this, the rear end of the Tank is easily worn by the Fastener of the Rider's jacket or the crotch of the Bottom, and after a long period of time, the surface of the [Color] The Clear paint will deteriorate, but this Pad provides extensive protection from such attacks.
I think it is effect Large for VTR250.
However, there is a little difficulty in installation, and whether it is because of the shape, the ability of the adhesive tape, or the deterioration over time, there is a little gap between the Tank and the tape. It might have been better if the fixing place of the adhesive tape was devised a little more, and it might be unavoidable because there is a certain thickness when trying to use the tape which has the ability not to peel even if it is exposed to the wind and rain.
It's not noticeable unless you stare at it up close, but some riders may feel their knee catching on the floating part of the side of the Tank Cover.
We have not had any problems with this vehicle.
If you use it for a long time, the surface of the pad will become white.
It's been less than 10 years since I installed it, and so far no rainwater has gotten into the floating parts and caused them to delaminate.
View detail
As a dress-up
It was installed on a 2017 CBR250RR.
The thing itself is very carefully made, not to mention very well made, no BALI or stains.
It only takes 5 minutes to install.
View detail
Holdability of the lower body is improved
Motive for purchasing
The VTR250 has a very slim body, coupled with the fact that it is VTWINEngine This can be seen in the tank shape It's a bit tiring as I consciously pinch it with my foot I also wanted to improve the position of the outside foot and the tank during banking with Circuit's Corner I tried this Tank Cover
About the product
Moderate puffiness is just right
The shape of this product is designed to have a bulge behind the Tank Especially, the area near the navel of the Rider is the most inflated, which makes it difficult for the body to move forward when holding In the NORMAL Tank shape, I feel that the body is close to the handlebar But the Tank Cover gave me more room to breathe
The feeling of holding in the bank is also improved
Knee grip is easier now that the tank is fuller, but it's even easier to hold in the bank I'm glad to see an improvement in the feeling I was feeling the same way about it I'm happy with the way it's stuck in the position I want it to be However, this is all about Quantity:Pair (for Left and Right) It's going to be done
Installation requires a lot of attention
To install this product, just use double-sided tape to attach it to the tank! But the double-sided tape that comes with it is not enough for me It is I added and installed the thick Double-sided Tape myself It is possible to say to the exterior parts of this kind in general, but the thick part and the thin part of FRP There were some sweetness in the details, such as some parts that were floating around where I wanted them to be close to the Tank
Also, this may be an issue on the Seat side, but the external Single seat cowl and When I installed it at the same time, the Single Seat was not able to be attached to the tank Although I took countermeasures by machining the position of the hole on the Seat side, the Single seat cowl and Be careful if you are thinking of using them together
View detail
Satisfied
In the case of R, it is a change from RType, purchased to prevent scratches on the tank and to cheat the dents And my stomach grabbed... (laughs) It would be nice to have a middle ground between R and S
Due to the nature of the product [Color] There was a few pockets in Clear, but I'm mostly happy with it
It arrived about a month after I ordered
View detail
It is important to look
Installation was extremely easy.
I have Carbon StyleSeal in Tank, but the appearance of harmony is perfect.
It just looks good, it is nothing else.
View detail
Something was delicate when it actually regarded, although it was [ photograph / with a photograph ] good touch.Or [ getting used, if it is not a Tank but black red and green Tank ].Since it is cheap, does it also say purchasing to a trial?
Something was delicate when it actually regarded, although it was [ photograph / with a photograph ] good touch.Or [ getting used, if it is not a Tank but black red and green Tank ].Since it is cheap, does it also say purchasing to a trial? View detail
He wanted to take out a feeling of a Volume to a Tank, and it purchased. Attachment is dramatically easy at double-stick tape. The fold of a Carbon is dramatically beautiful. Although the seating position is written to be a 4-cm Back, it is touch that
He wanted to take out a feeling of a Volume to a Tank, and it purchased. Attachment is dramatically easy at double-stick tape. The fold of a Carbon is dramatically beautiful. Although the seating position is written to be a 4-cm Back, it is touch that the position which sits down did not necessarily fall and the upper part of the Tank is extended back. since -- when it lay down, the end of the Tank was at least equivalent to lower [ of a breast ]. View detail
[Webike Monitor] It purchased in order to use dent hiding of the Tank more at a Sporty. Since it covered more than it considered, it dented and the Wound disappeared. Since it became appearance nearby SMART, it is satisfactory in
[Webike Monitor] It purchased in order to use dent hiding of the
Tank more at a Sporty.
Since it covered more than it considered, it dented and the Wound disappeared.
Since it became
appearance nearby SMART, it is satisfactory in general.
It is only painting after
and carrying out an actual arrangement.
View detail
He wanted to show appearance with a sufficient Parenthesis, and it was purchased! Although I got attachment to be a Motorcycle store, appearance change ますね (^^) although * price relieved comfortable although it was a Blue of the
He wanted to show appearance with a sufficient Parenthesis, and it was purchased! Although I got
attachment to be a Motorcycle store,
appearance change ますね (^^) although *
price relieved comfortable although it was a Blue of the
10 model is somewhat high, since a Wound is not attached to + Tank it becomes good parenthesizing, it is a case of killing two birds with one stone -- ~!
View detail
It attached to CBR250R (NC41). The Volume up of the slim Tank was carried out, and its own Motorcycle took to it much more. When however looked at often, there was a point a little regrettable about the portion which makes air bubbles being co
It attached to CBR250R (NC41).
The Volume up of the slim Tank was carried out, and its own Motorcycle took to it much more.
When however looked at often, there was a point a little regrettable about the portion which makes air bubbles being contained in parts, and is crowded.
On the whole, the attachment back, since the appearance rose, it is individually more satisfactory than attachment Saki.
View detail
He wanted to change appearance as hiding the crack of a Tank, and it purchased. Although it is the effect, the crack could also be hidden, and appearance also became very smart and it has satisfied it. I hear that attaching is very difficult for the
He wanted to change appearance as hiding the crack of a Tank, and it purchased.
Although it is the
effect, the crack could also be hidden, and appearance also became very smart and it has satisfied it.
I hear that attaching is very difficult for the
problem.
Although it is the very simple fixed method of fixing to a Tank with attached double-stick tape, for me, the crevice has been made for a while difficultly beyond anticipation between Tanks.
Since it is seldom conspicuous, I do not care, but it is attention in the case of attachment.
-- again -- VTR -- the time of a Knee grip -- a knee -- a Truss -- although there were a Frame and a point in which it interferes, the Tank became somewhat large by attaching this product, and it was lost that a knee and a Truss interfere.
The effect which was not expected also showed up and very much satisfied.
View detail